Face Wizard Boot Logo Editor 1.0

By Deepak

About This File

For Gigabyte MotherBoards

This is a Boot Logo Editor with this you can Change your Bios boot logo. only for Windows PC with Windows XP or Latest ..

you can Flash with the Gigabyte Tool Face Wizard

to your Bios and the "Full Screen Logo Show" will show the Apple Boot Splash picture.

You need to use the BMP file who is in the zip archive. with some more samples

  • Download this file

  • User Feedback


    • 5

    Share this review

    Link to review
    • Similar Content

      • By TechGuyYT
        Getting stuck at Yosemite Boot Logo!
        Alright so first off I am trying to install Yosemite Zone 10.10.1 onto my PC (Pentium G4500, Intel HD 530, 8GB DDR4....) and I keep getting stuck at the Hackintosh Zone boot logo.
        I start my PC, my USB shows up, I click it, and then I select the Yosemite file on the USB using the built-in Chameleon 2.2 and then it loads and then it gets stuck on the Hackintosh Zone logo (I don't even get to the installation). I have tried using -x (Safe Mode) and -v (Verbose Mode) and nothing seems to work. In Verbose mode, nothing shows up so I guess it's not even starting to load the installation? Please help.
        Also if anyone needs me to make a video showing what is happening I can do it.
      • By Leonel Chirinos
        You can Download(with resuming!) Latest Apple HD Recovery package, 
        Extract HFS-image and Restore it with BDU.
        Automatically Check/Download the Latest Clover Rev.
        and Check Zip-archives in Local Repository
        for existing Clover Rev,
        Download  files from User Download List
        and BDU Additional Download List.
      • By icontrol247
        Chameleon 2.2 bootloader resets BIOS???
        First time making a hackintosh here and used Niresh's OSX Yosemite. Had no success with Clover, but chameleon works fine. My problem is that when bootloader first starts, it resets my custom BIOS settings before rebooting the computer, resetting AHCI and Legacy boot settings, therefore failing in booting properly. I currently have to set these bios settings every time I start the computer, but I am wondering if there's a way to stop Chameleon (if Chameleon is the culprit) from resetting my BIOS... Computer is Samsung R580 with no modifications. Thanks!
      • By tim0910
        Asus H110M2 D3 - Installing Hackintosh
        I have problems to install Niresh Yosemite on my PC.
        I have a 250GB Samsung SSD, a r9 290 (i removed it for the installation), a i5 6500, 8gb RAM and an ASUS HM110M2 D3 mainboard.
        The .dmg file is on a 64GB USB stick. (I used TransMac for this)
        When i boot from the stick, it shows a screen with grey backround and the Hackintosh Zone logo. The progress bar, which should appear, doesnt appear at all.
        So where is my mistake? Is my mainboard incompatible (I tried to patch the bios file with pmpatch, but it didnt worked)?
        Thanks for help! (my english isnt that good yet, sry  )
      • By papaformigas
        Failed to boot the usb MACOSX El Capitan into my Acer 8951G Laptop: Boots windows all the time
        I am trying to install El Capitan to my laptop Acer Ethos 8951G laptop.

        I did my USB boot drive accordig to the OS X El Capitan 10.11 UniBeast 6 Clover Installation Guide .

        So I made the Boot USB and then I went to the Bios of my Laptop and there is not such "Optimised defaults" so I loaded the default Bios values and saved them. Then I changed the boot order with F12 to boot from the USB stick but nothing happened ... and Windows 7 starts loading up...

        Iam lost because no matter which method I follow when i try to boot it do not recognize the USB boot drive and runs immediately to windows.

        Help here what I need to do...

        Here the specs of my laptop just for you to check if its compatible wth Macos El Capitan or other version:
        Mainboard : Acer SM81_HR
        Chipset : Intel HM65
        Processor : Intel Core i7 2630QM @ 2000 MHz (max : 2900)
        Physical Memory : 4096 MB (2 x 2048 DDR3-SDRAM )
        Video Card : Intel® HD Graphics 3000
        GPU: Nvidia GeForce GT 555M
        Hard Disk : Seagate ST9750423AS (750GB)
        DVD-Rom Drive : Optiarc BD ROM BC-5500S
        Monitor Type : N184H6-L02 - 19 inches
        Network Card : Realtek Semiconductor RTL8168/8111 PCIe Gigabit Ethernet Adapter Network Card : Broadcom BCM43227 802.11b/g/n
        Bluetooth: Broadcom
        Fingerprint: EGISTEC
        USB 3.0: Renesas
        Webcam: Integrated
        Speaker: 5.1 Dolby integrated
        The BIOS of my Laptop is from InsydeH2O and there are only few parametres that can be changed..

        It just have:
        - "Information (sistem and Bios Information not editable)",
        - "Main" (that haves option Quiet Menu, Network Menu, F12 Boot Menu, D2D Recovery and SATA Mode)
        - "Security" (boot passwords, etc)
        - "Boot" ( all devices that can be ordered to boot first (HDD0, HDD1, ATAPI CDROM, USB FDD, USB HDD, NETWORK BOOT, USB CDROM)
        - "Exit" (save, default values, etc)
    • Popular Contributors