AMD FX6300 - MSI 970a-g43 - HD5670 - Yosemite 10.10.1
0

4 posts in this topic

AMD FX6300
MSI 970a-g43
Shappire ATI HD5670 1gb ddr3
Frescologic PCIE USB3 card
TPLINK TG3468 (RTL-8168) Pcie gigabit (internal lan broken)

Sound : External BCD3000 (internal not tested)

 

Install Method : Yosemitezone 10.10.1

Bios settings :

Turn off UEFI boot only so it can accept legacy bios / mbr boot
- Windows 8 Function off
- MSI Fastboot & Fastboot off
- Save & Boot

Installation Steps:

1. Make bootable USB Yosemitezone 10.10.1 in mac
2. Boot > Press f11 > Select USB Drive
3. Boot flag : /amd64 -v npci=0x2000 GraphicsEnabler=No
4. Format mac drive with GPT
5. Install with Chameleon boot loader
6. Finish install
7. Boot to new mac install with -x (safemode), it won't boot normally as it would stuck in grey screen + beachball
8. Go through initial setup, no network right now, realtek chip not detected.
9. Boot again in safemode to install FIX and Kext

FIX:
you will need to connect your mac with another method, as the lan not detected yet, i use usb disk with HFS formatted to download everything i need from another computer.

10. For the grey screen + beachball fix follow this guide :
http://www.insanelym...ning-beachball/

11. Realtek Lan : http://www.insanelym...ealtek-rtl8111/ and then use kext-dev-mode=1 or it would not work. Also use npci=0x2000 not 3000, more stable with network adapters.
12. HD5670 resolution fix : open chameleon wizard add GraphicsEnabler=No, Ati Config = Baboon, Ati Ports 3 and Graphic Mode 1920x1080x32 (Full QE/CI, Dual monitor OK)

 

Working out of box :

- USB3 (internal & external card) 1 port only , mouse, keyboard, external sound

- Shutdown, restart

- Appstore (minor fix)

 

Not working:

- Sleep

- Icloud & Imessage (need serial number)

On clover everything works except only in safe mode, when i boot normally got hanging beachball.

 

post-22244-0-57745400-1432809668_thumb.p

Share this post


Link to post
Share on other sites

Hello, I have the same motherboard as you. I can only boot into safe mode using -x npci=0x2000

I only have a windows laptop so how do it use HFS to copy the kext files across?

I don't even understand how to use a kext file, sorry!

All i know is on the hackintosh there is no internet and it wont recognise USB flash disks on FAT32

Please can anyone help, this is driving me crazy for 3 days :(

 

Share this post


Link to post
Share on other sites

Hello, my configuration is:

AMD FX 8350 PROCESSOR

MSI 970A-G43 MOTHERBOARD

2TB WD HDD (WINDOWS 10 INSTALLED)

500 GB SEAGATE (YOSEMITE 10.10.2) 

CORSAIR BALLISTIX 16 GB RAM

ASUS STRIX R7 370 4GB DDR5 GRAPHICS CARD

My problem is that I have installed yosemite on my 500 GB SATA HDD succesfuly & also run for the 1st time. But after that I am unable to boot into Yosemite & no option for choosing between HDDs is coming up in IDE RAID & AHCI MODE. Please help out. 

I was also facing problem in Networks section as it was showing Network error & I was unable to create & set up a connection.

Thank you

 

Share this post


Link to post
Share on other sites
On 28/5/2015 at 0:41 PM, ditoto said:

AMD FX6300
MSI 970a-g43
Shappire ATI HD5670 1gb ddr3
Frescologic PCIE USB3 card
TPLINK TG3468 (RTL-8168) Pcie gigabit (internal lan broken)

Sound : External BCD3000 (internal not tested)

 

Install Method : Yosemitezone 10.10.1

Bios settings :

Turn off UEFI boot only so it can accept legacy bios / mbr boot
- Windows 8 Function off
- MSI Fastboot & Fastboot off
- Save & Boot

Installation Steps:

1. Make bootable USB Yosemitezone 10.10.1 in mac
2. Boot > Press f11 > Select USB Drive
3. Boot flag : /amd64 -v npci=0x2000 GraphicsEnabler=No
4. Format mac drive with GPT
5. Install with Chameleon boot loader
6. Finish install
7. Boot to new mac install with -x (safemode), it won't boot normally as it would stuck in grey screen + beachball
8. Go through initial setup, no network right now, realtek chip not detected.
9. Boot again in safemode to install FIX and Kext

FIX:
you will need to connect your mac with another method, as the lan not detected yet, i use usb disk with HFS formatted to download everything i need from another computer.

10. For the grey screen + beachball fix follow this guide :
http://www.insanelym...ning-beachball/

11. Realtek Lan : http://www.insanelym...ealtek-rtl8111/ and then use kext-dev-mode=1 or it would not work. Also use npci=0x2000 not 3000, more stable with network adapters.
12. HD5670 resolution fix : open chameleon wizard add GraphicsEnabler=No, Ati Config = Baboon, Ati Ports 3 and Graphic Mode 1920x1080x32 (Full QE/CI, Dual monitor OK)

 

Working out of box :

- USB3 (internal & external card) 1 port only , mouse, keyboard, external sound

- Shutdown, restart

- Appstore (minor fix)

 

Not working:

- Sleep

- Icloud & Imessage (need serial number)

On clover everything works except only in safe mode, when i boot normally got hanging beachball.

 

Screen Shot 2015-05-28 at 5.34.43 PM.png

Hi, i have the same configuration, you used a specific image? because I used yosemite zone, though not working before installing Apple logo appears with a hammer and then pops up a ban ... which bios version you have?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
0