• 0

Successful install OSX Niresh Yosemite 10.10.1 <GTX 660..i5 4570..>
2 2

Question

475637591fb1dc6f5be8640214868068.thumb.p

Hey everybody just created this post to who have same or identical specs as me that wan't to install yosemite on the pc.

My system specs:
Motherboard: Asus H81M-K
CPU: Intel i5 4570
GPU: Asus Nvidia Geforce Gtx 660 2GB
RAM: 8 Gb Ram ddr3 (Kingstone)
HDD1: Western digital caviar black 500gb (YOSEMITE)
HDD2: Western digital caviar black 500gb (WINDOWS AND MAC PROGRAMS/MEDIA/GAMES DRIVE)
SSD: Samsung SSD NOW 300 120gb (WINDOWS 10)
MOUSE: SteelSeries Rival
KEYBOARD: Razor BlackWidow Ultimate Chroma
MONITOR1: HP vs17
MONITOR2: Panasonic Viera Smart TV TX-32AS500E

​This is not the first time i install niresh i successful installed mavericks 1 year ago but took me 3 days to get it working without crashes due to the kexts, now i simply installed this without any problem.

So first of all go download niresh yosemite 10.10.1 dmg (must be dmg) and transmac to burn it on usb drive from http://www.hackintosh.zone/file/810-nireshs-yosemite-with-amd-intel/

After that make sure you you follow this guide http://youtu.be/6jXkGAwP8H8

After that you have mac on your usb drive, now you can go ahead and restart your pc and go to your bios settings.

In the Bios Menu Use this (IF YOU HAVE SAME MOTHERBOARD AS ME SEE THE PHOTOS):

  • If HPET is available change it to ON & set HPET Mode as 64 Bit
  • Set SATA as AHCI
  • Enable ‘Executive Disable Bit’ (also known as XD Technology) (Disabling this may cause Hackintosh to Reboot Instantly)
  • Enable ‘Virtualization Technology’ (also known as VT Technology)
  • USB Legacy to ON (If you experience some usb related issues in verbose mode try switching to OFF)
  • If UEFI available turn it off & Enable legacy Boot
  • Save BIOS settings and restart

image.jpg

image.jpg

image.jpg

image.jpg

image.jpg

image.jpg

Now you'll need to press F8 and boot the usb device, after you see the LIST of "disks" use your arrow keys and find the one with name "Yosemite Installation", no type -f and press enter.

It will take 1-2 minutes to boot to the installation.

In the installation i just created normally the partition and after that i selected personalize and pressed install, it took 15 minutes and when it got finished it installed all the kexts that i need automatically after it finish it gived a notification. (if you got any error boot with this flag -v and post a photo of your screen so i can help you).

Hope this helps have fun hackintoshing :D

Edited by imputazz
1 person likes this

Share this post


Link to post
Share on other sites

1 answer to this question

  • 0

hi imputazz

iam Following Your Bios Settings,

I'm new to forum , Please Help me with the Yosemite Installation 

My PC Specs

Motherboard: ASUS Maximus VI Extreme
CPU: Intel i7 4770K
GPU: ASUS GTX 970 4GB
RAM: Corsair vengeance DDR3 16gb,
HDD1: seagate 500gb 7200rpm (Yosemite)
HDD2: seagate 2Tb (My Data)
SSD: Intel SSD 240gb (WINDOWS 10)
MONITOR: Dell 2420L

 

(i am Fallowing This Tutorial https://www.youtube.com/watch?v=YSOjr8K_Itg )

Yosemite_10.10.1_DMG ,Trans Mac Downloaded, Trans Mac Installed,

Yosemite-zone.dmg to make a bootable usb ,

Boot From USB,  I am Using This Flag /haswell npci=0x2000,

See The Down Image

How can I install Yosemite with all the drivers

imputazz  Please help me with some step-by-step tutorial through BIOS settings to Installation of Yosemite
Thanks

Those Steps Successfully Completed.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
2 2