• Announcements

    • Niresh

      Maintenance   07/11/2017

      There is a maintenance going on with server and site, The site may has some issue, If something doesn't work try back later Thanks

Other Kexts

Sign in to follow this  
Followers 0

199 files

  1. Hackintosh Network Solution Sierra Edition by Hackintosh Zone
    Finding WiFi, Lan kexts for your Hackintosh is hard in some case, this solution Auto Install Ethernet & WiFi kexts for most of the Hackintosh Machines including Laptops.
    but i have already made an All In One Network Solution that worked with Yosemite and prior versions but it may not work with Sierra, i have updated latest Kexts that will work with sierra and removed old kexts
    The following articles may help you.
    How To Find Hackintosh Internet (Ethernet & Wifi) Drivers + Kexts
    Supported Hackintosh Wifi Adapters For Desktops & Laptops
     
    Make sure you have installed LSPCI binary before installing this package
    Remove any custom kexts that you have manually installed, before installing this package.
    Download LSPCI
     
    The Following Network Adapter PCI IDs are Hackintosh Supported but some of them may not work if too old
     

    3,946 downloads

       (0 reviews)

    5 comments

    Updated

  2. tp link 10/100 external/pci network adapter/lan card driver for yosemite and supports el capitan ....model tf-3200. install using kext drop/kext wizard ....i'm using kext drop...
    Supports IEEE 802.3x Full Duplex Flow Control  The TF-3200 keeps low cost and eliminates usage barriers. It is easy to upgrade a network from 10Mbps to 100Mbps. It supports both 10Mbps and 100Mbps network speed both in Half-Duplex and Full-Duplex transfer modes, using Auto-Negotiation technology to detect the network speed.

    345 downloads

       (0 reviews)

    1 comment

    Updated

  3. FakePCIID.kext
    The purpose of this kext is to attach to any IOPCIDevice so it can provide alternate PCI ID when another driver attached to the same device requests them. This technique can be used instead of patching binaries that may check for supported device-ids (or other PCI IDs) in their IOService::probe or IOService::start method.
    In order to attach FakePCIID to a given IOPCIDevice, an injector kext must be built that IOKit can use to match against. The FakePCIID.kext Info.plist has no built-in IOKitPersonalities, as it is generic and not built to suit a specific purpose. The distribution Zip provide has four such injector kexts, which are described below. Custom injector kexts can be created for other devices.
    Note: FakePCIID_HD4600_HD4400.kext works for HD4400 mobile, HD4600 mobile, HD4200 mobile, and HD4600 desktop.
    In any case, a DSDT patch, FakeID configuration (Clover), or FakeProperties dictionary in the injector's Info.plist will be required to inject the properties that FakePCIID can read on the IOPCIDevice. The properties used by FakePCIID are described later in this post. The properties must be present on the PCIDevice that is being hooked (the direct parent of FakePCIID).
    Build Environment
    My build environment is currently Xcode 6.1, using SDK 10.6, targeting OS X 10.6. 32-bit Builds
    This project does not support 32-bit builds, although it is probably not difficult to build one given the proper tools.
    What's New in Version 2015-03-29
    All Credits go to: the-darkvoid and REHABMAN !

    207 downloads

       (0 reviews)

    0 comments

    Submitted

  4. Remove any existing "ApplePS2Controller, VoodooPS2Controller, AppleACPIPS2Nub, ApplePS2Keyboard and old Elan Touchpad" kexts if you have already installed from the HDD '/System/Library/Extensions ', '/Extra/Extensions', and '/System/Extensions/Library/myHack.kext/Contents/Plugins/' (if you used myHack USB installer for OSX).

    209 downloads

       (0 reviews)

    0 comments

    Updated

  5. Notice: This is used for none-Intel chipset USB3.0 controller.
    The AppleUSBXHCI.kext is based on Zenith432's patch.

    Install this to /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns.
    Or use Clover's KextsToPatch with the following Binary patch.

    1,125 downloads

       (1 review)

    0 comments

    Submitted

  6. http://www.bitsandch...php?f=13&t=1413

    This is the tutorial for snow leopard on Eeepc Asus 1005HA

    236 downloads

       (1 review)

    0 comments

    Submitted

  7. So, I made a kext for Broadcom NetXtreme BCM5705-A Gigabit ethernet controller.
    Works only on 32bit mode.
    Device ID: 14E4-1654
    How to install:
    1) Download 
    2) Delete IONetworkingFamily.kext and all kexts for Broadcom ethernet in System/Library/Extensions
    3) Drag and drop AppleBCM5751Ethernet.kext and IONetworkingFamily.kext on Kext helper, type your password (for root access) then click on "Easy install"
    4) Open disk utility, select your system HDD and click on "Repair permissions"
    5) Restart your "Mac" 
    6) Your BCM5705-A2 is ready
    EDIT (31.3.2012): I have uploaded a new script for Snow Leopard.

    213 downloads

       (0 reviews)

    0 comments

    Updated


  8. Realtek PCIe GBE Family Controller

    This worked with both the Bluetooth Wireless & Ethernet

    I hope this file can assist others.

    Thanks,

    Denhord

    3,190 downloads

       (0 reviews)

    1 comment

    Submitted

  9. works,see the screenshoots

    186 downloads

       (0 reviews)

    0 comments

    Submitted

  10. This is a kext for all Realtek 82xx Ethernet chips.It based on nforce driver
    1.download
    2.go to S/L/E
    3.search IONetworkingFamily.kext
    4.delate the kext
    5.copy the downloaded kext in S/L/E (the downloaded kext means too IONetworkingFamily.kext)
    6. Rebuild permissions with kext wizard please ignore all failer
    7.reboot
    8.go in the internet

    I have test it on a RTL8211BL and MCP73, but it works on all 82xx and nforce chips

    Only for 10.7.3, but you can test it on other 10.7.x and tell me if it work

    I mean 82xx not 81xx

    for 64-bit and 32-bit

    292 downloads

       (0 reviews)

    0 comments

    Submitted

  11. AtherosAR5B97pack 1.0

    426 downloads

       (0 reviews)

    0 comments

    Submitted

  12. 1.download
    2.go to S/L/E
    3.search IONetworkingFamily.kext
    4.delate the kext
    5.copy the downloaded kext in S/L/E (the downloaded kext means too IONetworkingFamily.kext)
    6. Rebuild permissions with kext wizard please ignore all failer
    7.reboot
    8.go in the internet

    I have test it on a RTL8211BL and MCP73, but it works on all 82xx and nforce chips

    Only for 10.7.3, but you can test it on other 10.7.x and tell me if it work

    I mean 82xx not 81xx

    for 64-bit and 32-bit

    61 downloads

       (1 review)

    0 comments

    Submitted

  13. Try at your own risk didn't work for me :mad::mad::mad::mad:

    376 downloads

       (0 reviews)

    1 comment

    Submitted

  14. http://applelife.ru/...50/#post-282872

    for Asrock K10N78M motherboard, (nVIDIA MCP78 - LAN Controller (PHY: Realtek RTL8211/8212)" PCI

    Maybe work on other motherboards with this LAN Controller.

    Delete your nForceLAN.kext in S/L/E,
    and copy my kext.
    Run Kext Utility, whait, and restart your Hakintosh)

    This kext from 10.6.0. , but work in 10.6.8 and 10.7.3, in others versions not tested.

    Sorry for my English, I am from Ukraine:)

    Please, comment:)

    88 downloads

       (0 reviews)

    0 comments

    Submitted

  15. 41MT-S2 V1.3
    en orden:
    -AtherosL1 (ETHERNET) 32/64 BITS
    -Atheros 5212 PCI (WI-FI/Airport Extreme) 32/64 BITS
    -Realtek 8187L (WI-FI USB) 32 BITS

    Atheros 5212 PCI causa "ERROR PARITY PCI PRESS F1..." (solo sucede en 10.8 DP1). Si alguien puede ayudarme ser�a genial.
    Realtek 8187L no almacena passwords desde Lion. Necesitas copiar el archivo RtProfilesListV2 que se guarda en /Library/Preferences/ desde tu instalaci�n de SNOW LEOPARD hacia LION (lo mismo en MOUNTAIN LION)

    36 downloads

       (0 reviews)

    0 comments

    Submitted

  16. Hello,

    This is a Package for Atheros AR5B195 which contains AR9285 Wifi with PID:168c,2b and Bluetooth AR3011 with the PID:3304

    WIFI:
    If you have different PID for your Wifi Chip then edit the info.plist file inside the Atheros kext with your's.

    BLUETOOTH:
    The Bluetooth Enabler Kext can work with other PID's, for this have to edit the info.plist file inside the kext with your's pid and vid. Convert the hex values of pid & vid to decimal and enter these values in the info.plist file.

    What it does is just uploads the firmware so It can be operated by the operating system drivers of Apple which doesn't upload firmware.

    Tested in 10.7.3 Only. But it can work for other versions too, if you find its not working then let me know I will try to fix it

    UPDATE: Had some problems with Fn+F2 switch before but this update fixes almost just a small bug only appears during restart where BT is not enabled but can be enabled/Disabled manually using Fn+F2 with this update.

    UPDATE2: Now its been updated to remove the errors and failing to enable the BT on restarts, however it will show the KIOErrors only during first system start it happens becoz this upload won't load before the probe from OS. But its better than before error since it won't upload every time the firmware (Only uploads during first system start only) unlike before.

    For Turning on and off bluetooth, use hardware keys Fn+F2 in Asus Notebooks (Press Twice to toggle Bluetooth)

    credit goes to mac4mat from {censored} for the Bluetooth Kext

    Update#3: Changed the Title to include the Wifi which comes together with this Bluetooth and also included the latest kext for Wifi along with updated and recompiled Bluetooth kext.

    Update#4 : Updated and Fixed Kexts for Both Lion and Mountain Lion,

    3,609 downloads

       (2 reviews)

    2 comments

    Submitted

  17. Railink rt2870 1.0

    176 downloads

       (0 reviews)

    0 comments

    Submitted

  18. Personally Tested on 2 different Asus A43SJ laptops, it all went great

    93 downloads

       (0 reviews)

    0 comments

    Submitted

  19. I used this to get my Belkin USB F5D7050 v1 adapter working.

    Boot with the device unplugged.
    Install package.
    Reboot.
    Plug in device.
    Open Application from folder and connect to your network.

    Enjoy

    132 downloads

       (0 reviews)

    0 comments

    Submitted

  20. For all USB RTL8187L chips.

    662 downloads

       (0 reviews)

    0 comments

    Submitted

  21. Intel Ethernet driver many bugs and long time not Upgrade
    This Driver Fixed Many Bugs.

    RealtekR1000SL writed by Chuck Fry (Works in NASA), since 2009 was initially written.
    Lnx2Mac's Realtek Ethernet was written on the basis of RealtekR1000SL

    Disable debug (not write log packet activity on HDD), Network Perfomace very good
    RealtekR1000SL updated on 02.29.2012 , Source code (commit 2cc9f6e27b) = https://github.com/p.../RealtekR1000SL

    Source code = RealtekR1000SL_src_25.04.2013.zip

    Support OS X:
    10.6 Snow Leopard
    10.7 Lion
    10.8 Mountain Lion
    10.9 Mavericks (Code name: Cabernet)
    10.10 Coming soon... (Code name: Syrah)

    Support cards:
    RTL8100E
    RTL8101E
    RTL8102E
    RTL8103E
    RTL8168B/8111B
    RTL8168C/8111C
    RTL8168CP/8111CP
    RTL8168D/8111D
    RTL8168DP/8111DP
    RTL8168E/8111E
    RTL8168E-VL/8111E-VL
    RTL8168F/8111F
    RTL8169
    RTL8169S/8110S
    RTL8169SB/8110SB
    RTL8169SC/8110SC
    RTL8401
    RTL8411
    Tested on 8112L (Asus P7P55D LE)
    and Other RTL*
    8111C/8111D/8111E/8111F
    8105 Series

    [Corrected] Mistake with warm boot after Windows. Thanks for Mieze, dmazar, rehabman.
    [Fix] Link Speed = 0 Resolved!
    [updated part] Support RTL 8105/RTL8136
    This kext is compiled under SL, XCode 3.2.5.
    For use in ML I'll check little later. EDITED: I checked, it works in ML 10.8.3. Support XCode 5.0.1

    What's New in Version 3.0.4 (See full changelog)
    - RTL8168E,F/8111E,F.It works
    - Corrected a mistake with warm boot after Windows. Thanks for Mieze, dmazar, rehabman.
    - Updated part for RTL 8105/RTL8136
    This kext is compiled under SL, XCode 3.2.5. For use in ML I'll check little later. EDITED: I checked, it works in ML 10.8.3.

    1,337 downloads

       (1 review)

    0 comments

    Updated

  22. This is a kext for all Realtek 82xx Ethernet chips.
    I have test it on a RTL8211BL and MCP73, but it works on all 82xx and nforce chips
    Only for 10.8, but you can test it on other 10.7.x and tell me if it work

    I mean 82xx not 81xx

    for 64-bit and 32-bit

    81 downloads

       (0 reviews)

    0 comments

    Submitted

  23. This is a kext for all Realtek 82xx Ethernet chips.

    I have test it on a RTL8211BL and MCP73, but it works on all 82xx and nforce chips

    Only for 10.7.4, but you can test it on other 10.7.x and tell me if it work

    I mean 82xx not 81xx

    for 64-bit and 32-bit

    31 downloads

       (0 reviews)

    0 comments

    Submitted

  24. Hi here are the two kexts that worked for me, other versions of these kexts couldn't start up my wifi card, except combination of two of this.
    They are downloaded from different websites. Just maybe someone will find it useful. I've tried on MLion, and on one of the sites it was said it will go for 10.7.3 too.

    94 downloads

       (0 reviews)

    0 comments

    Submitted

  25. This version of the IO80211Family kext has been patched for the D-link DWA 510 /Atheros AR2413 wireless pci card.
    I have tested it in 10.7 and 10.8 successfully.

    277 downloads

       (0 reviews)

    0 comments

    Submitted

Sign in to follow this  
Followers 0