• Posts

    • Vanilla or Sierra Zone on Core 2 Duo & Intel DG35EC Computer: Intel Core 2 Duo E7500 (SSE4 capable) Intel DG35EC nVidia 9400 GT Niresh. I have tried Sierra Zone and Yosemite. The USB booting gets stuck on a blinking underscore. I cannot type anything. So I tried it with a hard disk instead. Transmac on to a USB hard disk. Same result. Any ideas?
    • Wifi, Touchpad, mouse USB, USB 3.0 Dell Latitude E6430 not working Hello everybody, My laptop's Dell Latitude E6430 installed macOS Sierra but Wifi, Touchpad, usb mouse and usb 3.0 not working, How to fix this problem? Please help me, everybody....
    • Mackintosh does not turn off or sleep I Installed Sierra from scratch with the Niresh distro provided in Hackintosh computer, everything works fine (Sound, wifi, bluetooth) except that the machine does not go to sleep (with the BIOS configured as S1 it slows down the fan and then the rig reeboots, with S3 it only slows down the fan but does not go to sleep), when I click on shut down the screen goes blank and after a few seconds it reboots) my Motherboard is a very old gigabyte g41-sl2 with Core2duo 3.16 ghz,  8 gb of DDR3 RAM, graphics card is a Nvidia 8400 gs 512 of vram, a SSD of 120 gb and two hard drives of 500 gb each, does anybody have figured out how can that issue be fixed? thank you in advance
    • "Unable To Install Yosemite On My Hp amd Laptop hi !! I have Hp amd Laptop  HP 15-ba021ax (AMD A10-9600p 2.3GHz AMD A10-9600P processor 4GB DDR4 RAM 1TB 5400rpm Serial ATA hard drive 15.6-inch screen, AMD Radeon R7 M440 2GB Graphics i Created A bootable USB of Yosemite Latest Version and Boot it Via USB..I tried Lots of Boot flags but every time Installation Stuck at Apple Logo on Starting..Alwaye my Laptop stuck at Apple logo on starting. So, i Requested you to please help me to install Yosemite In mY Hp amd Laptop ... Thank You" What boot flags did u enter?

VMware Unlocker for OS X 1.2.0
0

By Deepak
(2)

2 Screenshots

About This File

Mac OS X Unlocker for VMware

============================

1. Introduction

---------------

The package is a combination of the Unlocker code written by Zenith432 plus some

scripts written by myself that wrap the actual unlocker code.

It has been tested against:

* Workstation 8/9/10 on Windows and Linux (32 & 64-bit versions)

* Player 4/5/6 on Windows and Linux (32 & 64-bit versions)

* Fusion 4/5/6 on Snow Leopard, Lion and Mountain Lion

* ESXi 5.0/5.1

The patch code carries out the following modifications dependent on the product

being patched:

* Fix vmware-vmx and derivatives to allow Mac OS X to boot

* Fix vmwarebase .dll or .so to allow Apple to be selected during creation

* Copy darwin.iso if needed to VMware folder

Note that not all products recognise the darwin.iso via install tools menu item.

You will have to manually mount the darwin.iso for example on Workstation.

Also Player is missing vmware-vmx-debug and vmware-vmx-stats files and so an

error is shown during patching as the files are not found. This can be safely

ignored.

The vmwarebase code does not need to be patched on ESXi or OS X so you will see a

message on those systems telling you that it will not be patched.

In all cases make sure VMware is not running, and any background guests have

been shutdown.

2. Windows

----------

On Windows you will need to either run cmd.exe as Administrator or using

Explorer right click on the command file and select "Run as administrator".

install.cmd - patches VMware and copies darwin.iso tools image to VMware

uninstall.cmd - restores VMware and removes darwin.iso tools image from VMware

3. Linux

---------

On Linux you will need to be either root or use sudo to run the scripts.

You may need to ensure the contents of the linux folder have execute permissions

by running chmod +x against the 4 files.

install.sh - patches VMware and copies darwin.iso tools image to VMware

uninstall.sh - restores VMware and removes darwin.iso tools image from VMware

4. Mac OS X

-----------

On Mac OS X you will need to be either root or use sudo to run the scripts.

This is really only needed if you want to use client versions of Mac OS X.

You may need to ensure the contents of the osx folder have execute permissions

by running chmod +x against the 3 files.

install.sh - patches VMware

uninstall.sh - restores VMware

5. ESXi

-------

ESXi has to be patched using the scripts, as the unlocker is used to overlay

the ESXi firmware at runtime. You will need to transfer the files to the

ESXi host either using vSphere client or SCP.

Once uploaded you will need to either use the ESXi support console or use SSH to

run the commands. Please note that you will need to reboot the host for the

patches to become active.

<<< WARNING: use a datastore volume to run the scripts >>>

You may need to ensure the contents of the esxi folder have execute permissions

by running chmod +x against the 3 files.

install.sh - patches VMware

uninstall.sh - restores VMware

6. Zenith432's Unlocker

-----------------------

In all cases the unlocker can be run without the scripts but you would need to

carry out additional actions which the scripts encapsulate for you especially on

ESXi. If you want to run the unlocker directly the parameters are:

Usage: ./Unlocker.Linux64 [-h] [-u] [target_directory]

-h: print help

-u: remove the patch

target_directory: customize location of vmx executables

On all platforms you must run it with administrator or root privileges.

The source code is provided and Zenith432 makes it freely available for

modification. I have modified the code and it is available as per Zenith432's

original statement.

Thanks to Zenith432 for building the unlocker and Mac Son of Knife for all

the testing and support.

History

-------

11/10/11 1.0.0 - First release

07/11/11 1.0.1 - Fixed typo in Windows command files

07/12/11 1.0.2 - Updated patcher and tools for latest release WKS 8.0.1 & FUS 4.1.1

10/05/12 1.1.0 - Changed the patching mechanism for vmwarebase .dll or .so

& tested against ESXi 5.0 U1 and Tech Previews.

13/07/13 1.1.1 - Changed ESXi scripts to ensure not deleting root /bin folder

- Fixed vmwarebase patching on 32-bit Linux

- Some other code clean-up in Unlocker.cpp

18/09/13 1.2.0 - Updated pattern matching for WKS 10.0.0 & FUS 6.0.0

© 2011-2013 Dave Parsons


What's New in Version 1.2.0   See changelog

Released

  • 18/09/13 1.2.0 - Updated pattern matching for WKS 10.0.0 & FUS 6.0.0Updated pattern matching for WKS 10.0.0 & FUS 6.0.0

1 person likes this

  • Download this file


  • User Feedback

    Create an account or sign in to leave a review

    You need to be a member in order to leave a review

    Create an account

    Sign up for a new account in our community. It's easy!


    Register a new account

    Sign in

    Already have an account? Sign in here.


    Sign In Now

    Deepak

    • 5
      

    Share this review


    Link to review