• Posts

    • Unable To Install Yosemite On My Hp amd Laptop hi !! I have Hp amd Laptop  HP 15-ba021ax (AMD A10-9600p 2.3GHz AMD A10-9600P processor 4GB DDR4 RAM 1TB 5400rpm Serial ATA hard drive 15.6-inch screen, AMD Radeon R7 M440 2GB Graphics i Created A bootable USB of Yosemite Latest Version and Boot it Via USB..I tried Lots of Boot flags but every time Installation Stuck at Apple Logo on Starting..Alwaye my Laptop stuck at Apple logo on starting. So, i Requested you to please help me to install Yosemite In mY Hp amd Laptop ... Thank You
    • Won't boot help Hi there I have a asrock mother board and I want to dual boot Yosemite.  I have done all the alterations to the bios when I try and boot to the USB it comes up with a single flashing - and this continues forever , even tryed leaving it over night. Any help with this would be greatly appreciated.  Thanks. 
    • Brix Pro GB-BXi5-4570R Hello I have  installed Hackintosh Sierra Zone on my Brix Pro GB-BXi5-4570R from zero with no major issues, after install I can only get up to the boot screen where I have to choose the partition to boot from, but because the system does not detect the USB ports it will not see my usb mouse or usb keyboard, so there fore i´m stuck there and can not boot into OSX I was able to boot into the OSX by booting from the USB drive, by choosing from the bios boot sequence to boot from USB first, once it boots into OSX the usb mouse and usb keyboard don´t work unless i switch to a different usb port, so every time I boot is the same I need to boot form USB and I need to switch the kb and mouse to a different USB port and then the usb keyboard and usb mouse work I have downloaded and installed the kexts form here Sierra AMD Kernel & USB Fix and still did not fix it This Brix Pro has 4 USB ports and all of them are USB 3.0 Any Ideas?  
    • Just a quick update: I managed to solve it. Found the right clover settings on a different forum and everything is working well now. Have a few things to still solve, like a background noise when audio runs thru headphones or facetime. Other than that ... didn't notice anything to run in a bad way. My GTX 1060 works great. Cheers, Coss
    • Intel i3-4150 (Desktop Compatible?) Hi I am new to the hackintosh scene I have a computer that was built by me, a while back, I am wondering whether I can install OS X on it, it has a gigabyte GA-H81M-S2H GSM motherboard and an Intel (R) Core (TM) I3-4150 CPU @ 3.50GHz   3.50GHz and would my Happauagepauge (WINTV) Tuner work on OS X it's a Hauppaugage WinTV HVR-1250 (Model 79XXX, Hybrid ATSC/QAM) Tuner, Realtek HD Audio, Can't Find Model in Device Manager or the LAN Port driver it has builtin Graphics (Intel of course) So Should I go about trying it, I have a spare SSD that i use for testing so I will be using that for this test.

Clover v2k r2664
0

By Deepak
(1)

1 Screenshot

About This File

Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.

The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/


What's New in Version r2664

Released

  • - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
  • - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
  • - mostly Clover do automatic detection of hardware and set all properties by default.
  • But user can change them by config.plist
  • - with Clover you may restart into other OS from Startup Disk prefPane
  • - UUID written into config.plist will be the same as in OS
  • - SMBIOS will be corrected to standard 2.6
  • - ACPI will be corrected to standard 4.0.
  • Custom DSDT will be loaded from booted partition or from EFI folder
  • - customizable RestartFix and sleep/wake fixes and PCIRootUID value
  • - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
  • Also customizable.
  • - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
  • - HDA injector and Ethernet builtin injector
  • - CPU turbo and P- and C-states generator
  • - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
  • - extra kexts loading and security mode for FireWire
  • - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
  • - saving boot.log in OS and preboot.log from GUI by typing F2
  • MD5 (sym/Clover_v2k_r2664.pkg) = e1203a055b154abcd8cd714a29c8c1a9


  • Download this file


  • User Feedback

    Create an account or sign in to leave a review

    You need to be a member in order to leave a review

    Create an account

    Sign up for a new account in our community. It's easy!


    Register a new account

    Sign in

    Already have an account? Sign in here.


    Sign In Now

    Alain Frenois

    • 5
      

    Share this review


    Link to review