• Posts

    • Won't boot help Hi there I have a asrock mother board and I want to dual boot Yosemite.  I have done all the alterations to the bios when I try and boot to the USB it comes up with a single flashing - and this continues forever , even tryed leaving it over night. Any help with this would be greatly appreciated.  Thanks. 
    • Brix Pro GB-BXi5-4570R Hello I have  installed Hackintosh Sierra Zone on my Brix Pro GB-BXi5-4570R from zero with no major issues, after install I can only get up to the boot screen where I have to choose the partition to boot from, but because the system does not detect the USB ports it will not see my usb mouse or usb keyboard, so there fore i´m stuck there and can not boot into OSX I was able to boot into the OSX by booting from the USB drive, by choosing from the bios boot sequence to boot from USB first, once it boots into OSX the usb mouse and usb keyboard don´t work unless i switch to a different usb port, so every time I boot is the same I need to boot form USB and I need to switch the kb and mouse to a different USB port and then the usb keyboard and usb mouse work I have downloaded and installed the kexts form here Sierra AMD Kernel & USB Fix and still did not fix it This Brix Pro has 4 USB ports and all of them are USB 3.0 Any Ideas?  
    • Just a quick update: I managed to solve it. Found the right clover settings on a different forum and everything is working well now. Have a few things to still solve, like a background noise when audio runs thru headphones or facetime. Other than that ... didn't notice anything to run in a bad way. My GTX 1060 works great. Cheers, Coss
    • Intel i3-4150 (Desktop Compatible?) Hi I am new to the hackintosh scene I have a computer that was built by me, a while back, I am wondering whether I can install OS X on it, it has a gigabyte GA-H81M-S2H GSM motherboard and an Intel (R) Core (TM) I3-4150 CPU @ 3.50GHz   3.50GHz and would my Happauagepauge (WINTV) Tuner work on OS X it's a Hauppaugage WinTV HVR-1250 (Model 79XXX, Hybrid ATSC/QAM) Tuner, Realtek HD Audio, Can't Find Model in Device Manager or the LAN Port driver it has builtin Graphics (Intel of course) So Should I go about trying it, I have a spare SSD that i use for testing so I will be using that for this test.

2 Screenshots

About This File

Full package of software i used to run hackintosh(for play a games and web development).

All needed to startup OS X kexts are included into Extensions.MKext(Battery, Sound, Sensors and other).

Contains simple installer script for make bootable flash in terminal mode fast and correct.

It helps if you can run only with boot DVD into installer and have a terminal skills(fast fix bootloader and PBR sectors) gives more fast install.

+ Some security helper scripts for better configurations your system.

Extra folder intended to use with Chimera bootloader and may have an errors with Cham-n, Enoch and others.

Download xBoot latest.

Mkext update instructions:

Create && Unpack shortcuts for Kernel Caches

$ sudo find ./ -type f -exec chmod 644 {} \;
$ sudo find ./ -type d -exec chmod 755 {} \;
$ sudo chown -R root:wheel ./

$ chmod -R 755 KextName.kext
$ chown -R 0:0 KextName.kext

Extract Mkext command

$ mkextunpack -a x86_64 -d /Users/zen/Desktop/ Extensions.mkext

Fast creation of System Kexts and Caches package(from current directory):

$ sudo find ./ -type f -exec chmod 644 {} \; && sudo find ./ -type d -exec chmod 755 {} \; && sudo chown -R root:wheel ./
$ sudo kextcache -v 5 -a i386 -a x86_64 -z -c -b -m ./Extensions.mkext ./

Some info about bootsectors:

boot0af

boot0ss

boot1altV3

boot1f32

boot1f32alt

boot1h

boot1h2

fdisk440

boot0af (boot0 Active First) - MBR sector that search for active partition in MBR table (then GPT table). Origin from Apple's boot132 project. This version of boot0af implements hybrid GUID/MBR partition scheme support. Written by Tamás Kosárszky on 2008-03-10

boot0ss (boot0 Signature Scanning) - MBR sector that search for partition with valid PBR signature regardless if it's active or not. Good for Windows that wants to have its partition active. It share the same code as boot0af. Only scanning is done in different order.

boot1h - PBR sector for HFS+ formatted partition. Search for file "boot" in the root of the partiton. Origin from Apple's boot132 project. Written by Tamás Kosárszky on 2008-04-14. This is mod by Slice to support large boot file. Not 440kb as origin but 472k needed to boot Clover-64.

boot1h2 - PBR sector for HFS+ formatted partition with alternative booting with choice of key pressed. File to boot = "boot{key}". Coded by dmazar based on boot1h.

boot1f32 - PBR sector for FAT32 formatted partition. Search for file "boot" in the root of the partiton. Useful for EFI partition or USB stick. Written by mackerintel on 2009-01-26.

boot1f32alt - PBR sector for FAT32 formatted partition with alternative booting with choice of key pressed. File to boot = "boot{key}". Modded by Slice based on

boot1f32 and boot1h2.

p.s.: can't find a better place to share it(very slow internet ... try to reaupload this solution to www.hackintosh.zone again in few days) ... maby any people from community administration can upload it in this post? thanks...


What's New in Version latest   See changelog

Released

  • New FakeSMC, Legacy RTC, ALX Ethernet and Generic USB xHCI + Recovery Partition Mavericks.
  • Some advanced applications to work with system development and safe administration.
  • May have an issues with DropMCFG on OS X Mavericks.


  • Download this file


  • User Feedback

    Create an account or sign in to leave a review

    You need to be a member in order to leave a review

    Create an account

    Sign up for a new account in our community. It's easy!


    Register a new account

    Sign in

    Already have an account? Sign in here.


    Sign In Now

    There are no reviews to display.