• Posts

    • Brix Pro GB-BXi5-4570R Hello I have  installed Hackintosh Sierra Zone on my Brix Pro GB-BXi5-4570R from zero with no major issues, after install I can only get up to the boot screen where I have to choose the partition to boot from, but because the system does not detect the USB ports it will not see my usb mouse or usb keyboard, so there fore i´m stuck there and can not boot into OSX I was able to boot into the OSX by booting from the USB drive, by choosing from the bios boot sequence to boot from USB first, once it boots into OSX the usb mouse and usb keyboard don´t work unless i switch to a different usb port, so every time I boot is the same I need to boot form USB and I need to switch the kb and mouse to a different USB port and then the usb keyboard and usb mouse work I have downloaded and installed the kexts form here Sierra AMD Kernel & USB Fix and still did not fix it This Brix Pro has 4 USB ports and all of them are USB 3.0 Any Ideas?  
    • Just a quick update: I managed to solve it. Found the right clover settings on a different forum and everything is working well now. Have a few things to still solve, like a background noise when audio runs thru headphones or facetime. Other than that ... didn't notice anything to run in a bad way. My GTX 1060 works great. Cheers, Coss
    • Intel i3-4150 (Desktop Compatible?) Hi I am new to the hackintosh scene I have a computer that was built by me, a while back, I am wondering whether I can install OS X on it, it has a gigabyte GA-H81M-S2H GSM motherboard and an Intel (R) Core (TM) I3-4150 CPU @ 3.50GHz   3.50GHz and would my Happauagepauge (WINTV) Tuner work on OS X it's a Hauppaugage WinTV HVR-1250 (Model 79XXX, Hybrid ATSC/QAM) Tuner, Realtek HD Audio, Can't Find Model in Device Manager or the LAN Port driver it has builtin Graphics (Intel of course) So Should I go about trying it, I have a spare SSD that i use for testing so I will be using that for this test.
    • HI, I have Dell Inspiron 4010, Before installing i have not set any boot flag, on installation i did customise and only did this (uncheck Ethernet and Sound, then extend Graphics > Backup Graphics Kext and select to move ATI and NVIDIA Graphics Extensions) . Installation finished successfully but later on when laptop gets restarted and then i boot it with  "  -f -v IntelCapriFB=3 " flag. It later given error ( attached screenshot below).

      Dell Inspiron 4010.
      4GB RAM - 500GB HDD
      Inbuit Intel HD onboard graphics. 
        Verbose mode says:
      DSMOS has arrived... Screenshot URL: https://drive.google.com/open?id=0B8EU9lLUoGWTYko5Ni1mbzQyUWs
      Screnshot:
        UPDATE:
      I fix this issue and i successfully able to use Mac
      Below thing i did to get it work.

       
      Boot with -s Type: mount -uw /
      Type: cd /System/Library/Extensions
      Type: mkdir intel_back
      Type: mv AppleIntelHD* AppleIntelF* intel_back/
      Type: touch ../Extensions reboot with -v GraphicsEnabler=Yes IPGEnabler=Yes PCIRootUID=1 npci=0x3000

      Thats it 

VMWare Unlocker 2.0.2
10 10

By Niresh
(19)

1 Screenshot

About This File

Use this tool to make VMWare Completely Support Mac OS X

Mac OS X Unlocker for VMware V2.0

=================================

1. Introduction

---------------

Unlocker 2 is designed for Workstation 11, Player 7 and Fusion 7.

If you are using an earlier product please continue using Unlocker 1

Version 2 has been tested against:

* Workstation 11 on Windows and Linux

* Player 7 on Windows and Linux

* Fusion 7 on Mavericks and Yosemite

* (Currently is does not work on ESXi 6.0)

The patch code carries out the following modifications dependent on the product

being patched:

* Fix vmware-vmx and derivatives to allow Mac OS X to boot

* Fix vmwarebase .dll or .so to allow Apple to be selected during VM creation

* A copy of the latest VMware Tools for OS X is included

Note that not all products recognise the darwin.iso via install tools menu item.

You will have to manually mount the darwin.iso for example on Workstation and Player.

The vmwarebase code does not need to be patched on OS X so you will see a

message on those systems telling you that it will not be patched.

In all cases make sure VMware is not running, and any background guests have

been shutdown.

The code is now Python as it makes the Unlocker easier to run and maintain on ESXi.

There are some challenges to write the code as ESXi has a subset of Python 2.7 which

constrains some modules that can be used.

2. Prerequisites

----------------

The code requires Python 2.7 to work. Most Linux distros and OS X ship with a compatible

Python interpreter and should work without requiring any additional software.

Windows will need a version of Python installed and the code has been tested against:

CPython - https://www.python.org/downloads/

ActiveState Python - http://www.activestate.com/activepython/downloads

IronPython - https://ironpython.codeplex.com/releases/view/169382

The python.exe file must be on the executable PATH. If it is not on PATH please

edit win-install.cmd to point to the installation path.

3. Limitations

--------------

The Unlocker currently does not work on ESXi 6.

The Unlocker does not remove the check for server versions for OS X Leopard and

Snow Leopard (10.5 and 10.6).

+-----------------------------------------------------------------------------+

| IMPORTANT: |

| ========== |

| |

| If you create a new VM using version 11 hardware VMware will stop and |

| create a core dump.There are two options to work around this issue: |

| |

| 1. Change the VM to be HW 10 - this does not affect performance. |

| 2. Edit the VMX file and add: |

| smc.version = 0 |

| |

+-----------------------------------------------------------------------------+

Work continues to find solutions to the limitations.

4. Windows

----------

On Windows you will need to either run cmd.exe as Administrator or using

Explorer right click on the command file and select "Run as administrator".

win-install.cmd - patches VMware

win-uninstall.cmd - restores VMware

5. Linux

---------

On Linux you will need to be either root or use sudo to run the scripts.

You may need to ensure the Linux scripts have execute permissions

by running chmod +x against the 2 files.

lnx-install.sh - patches VMware

lnx-uninstall.sh - restores VMware

6. Mac OS X

-----------

On Mac OS X you will need to be either root or use sudo to run the scripts.

This is really only needed if you want to use client versions of Mac OS X.

You may need to ensure the OS X scripts have execute permissions

by running chmod +x against the 2 files.

osx-install.sh - patches VMware

osx-uninstall.sh - restores VMware

Thanks to Zenith432 for originally building the C++ unlocker and Mac Son of Knife for all

the testing and support.

History

-------

12/12/14 1.0.0 - First release

(c) 2011-2014 Dave Parsons


3 people like this

  • Download this file


  • User Feedback

    Create an account or sign in to leave a review

    You need to be a member in order to leave a review

    Create an account

    Sign up for a new account in our community. It's easy!


    Register a new account

    Sign in

    Already have an account? Sign in here.


    Sign In Now

    Guest

    • 5
       0 of 1 member found this review helpful 0 / 1 member

    Share this review


    Link to review
    Sureshot90

    • 5
      

    Very nice, thank you a lot! 

    Share this review


    Link to review
    Darklog360

    • 1
      

    It refuses to download.

    Share this review


    Link to review
    Niresh

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    pandu

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 4
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review
    Guest

    • 4
      

    Share this review


    Link to review
    Guest

    • 5
      

    Share this review


    Link to review