Sierra usbs not working on laptop acer v7 582pg - macOS Sierra Zone - Hackintosh Zone Jump to content
  • 0
Sign in to follow this  
pablacas

Sierra usbs not working on laptop acer v7 582pg

Question

pablacas    0
Sierra usbs not working on laptop acer v7 582pg

Hi everybody!

After installing Sierra zone usbs, webcam, and microphone are not working. ( wifi and intel 4400 either but that is less urgent ).

Laptop hardware works almost out of the box on Yosemite Zone ( Unfortunatelly Xcode is a requirement ).

Everytime I save clover configurator plist, even if I don't change anything, I get a system up time and doesn't boot anymore.

Any help will be greatlty appreciated.

 

More info:

Laptop hardware is i54200u, gtx750m. Bios locked.

For installation I boot from usb2.0 port with flags -x -v maxmem=4096 dart=0
it shows "waiting root device" message until I remove the usb device from the 2.0port and plug it into the 3.0 port and installation automatically resumes.
I guess something is wrong with the usbs right from the start.

 

Share this post


Link to post
Share on other sites

1 answer to this question

Recommended Posts

  • 0
Niresh    2,312

With USBInjectAll kext 

Try to apply the correct Clover Config patch with the following file

https://raw.githubusercontent.com/RehabMan/OS-X-USB-Inject-All/master/config_patches.plist

 

Notes: 

If you have an X99-series chipset XHC controller, 8086:8d31, install XHCI-x99-injector.kext from the project as well. The USB3 drivers will not load without this injector kext.

If you have a 200-series chipset XHC controller, 8086:a2af, you may need to install XHCI-200-series-injector.kext from the project. The drivers will load without it, but maybe not the correct ones. This injector kext invokes the same drivers used by 100-series 8086:a12f.

 

Here you can find those kexts if you need

Download Kexts ZIP

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. My motherboard is an AsRock Killer Fatal1ty 990FX.
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×