GT730 no signal after second boot - macOS Sierra Zone - Hackintosh Zone Jump to content
  • 0

GT730 no signal after second boot


mic87xp1    0

GT730 no signal after second boot

Hi, i'm trying to install Sierra Zone on my HP 6300 SFF with NVidia Geforce GT730 2GB. After the installation it works perfectly, but after the second boot the monitor remain on "no signal" screen after Clover boot.

I have do many test:

  • I selected bot GraphicsEnabler=yes and Enable Default NVidia Driver and deselect Backup Graphics Kext => No Signal after second boot
  • I select GraphicsEnabler=yes and Backup Graphics Kext and deselect Enable Default NVidia Driver => Monitor works but Mac OS doesn't recognize the GPU
  • I select Enable Default NVidia Drivar and Backup Graphics Kext and deselect GraphicsEnabler=yes => Monitor works but Mac OS doesn't recognize the GPU

What I have to do to solve it ?

This is my configuration:



Computer type:  PC ACPI basato su x64

OS:  Microsoft Windows 10 Pro

Service pack  -

Internet Explorer  11.0.10586.0 (IE 11.0.24)

Edge  25.10586.0.0

DirectX  DirectX 12.0

Computer name:  UTENTE-PC

Username  utente

Domain utente-PC

Date / Hour  2017-07-24 / 21:33



CPU QuadCore Intel Core i5-3570, 3600 MHz (36 x 100)

Motherboard name  Hewlett-Packard HP Compaq Pro 6300 SFF

Motherboard Chipset  Intel Panther Point Q75, Intel Ivy Bridge

RAM  8136 MB (DDR3-1600 DDR3 SDRAM)

DIMM1: Elpida EBJ41UF8BDW0-GN-F  4 GB DDR3-1600 DDR3 SDRAM (11-11-11-28 @ 800 MHz) (10-10-10-27 @ 761 MHz) (9-9-9-24 @ 685 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-19 @ 533 MHz) (6-6-6-16 @ 457 MHz)

DIMM3: Elpida EBJ41UF8BDW0-GN-F  4 GB DDR3-1600 DDR3 SDRAM (11-11-11-28 @ 800 MHz) (10-10-10-27 @ 761 MHz) (9-9-9-24 @ 685 MHz) (8-8-8-22 @ 609 MHz) (7-7-7-19 @ 533 MHz) (6-6-6-16 @ 457 MHz)

BIOS Type Compaq (09/15/2015)

Porta di comunicazione  Nuvoton Communications Port (COM1)

Porta di comunicazione  Intel(R) Active Management Technology - SOL (COM4)

Porta di comunicazione  Porta stampante ECP (LPT1)



Adattatore video  NVIDIA GeForce GT 730 (2 GB)

3D Acceleration nVIDIA GeForce GT 730

Monitor generic Plug and Play [NoDB]



audio  nVIDIA HDMI/DP @ nVIDIA GK208 - High Definition Audio Controller

audio  Realtek ALC221 @ Intel Panther Point PCH - High Definition Audio Controller [C-1]


Hard drive:

Controller IDE  Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller

Controller di archiviazione  Controller spazi di archiviazione Microsoft

TS256GSSD370S (256 GB, SATA-III)






C: (NTFS)  232.2 GB (203.4 GB free)

D: (NTFS)  931.4 GB (801.8 GB free)

Total 1163.6 GB (1005.2 GB free)



Keyboard HID

Tastiera  Tastiera standard PS/2

Mouse  HID

 Mouse PS/2 Microsoft



Intel(R) 82579LM Gigabit Network Connection


Share this post

Link to post
Share on other sites

3 answers to this question

Recommended Posts

  • 1
Niresh    2,312

Did you try by Install nvidia webdriver


  • Like 1

Share this post

Link to post
Share on other sites
  • 0
mic87xp1    0
8 hours ago, Niresh said:

Did you try by Install nvidia webdriver


Ok, now GPU work perfectly, thank you!.
But now Soundcard doesn't work.
I tried to install VoodooHDA but after I installed it GPU stopped works again and sound doesn't work anyway.
What I can do to make soundcard works?

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. My motherboard is an AsRock Killer Fatal1ty 990FX.
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
    • Comments
    • Reviews