kernel panic when installing - Hackintosh Sierra - Hackintosh Zone kernel panic when installing Jump to content

kernel panic when installing

Recommended Posts

kernel panic when installing


Mobo: Asus P7H55
CPU: i5-660
Ram:8GB(taken from my computer that i use more)
GPU: EVGA nVidia 550 Ti
PSU:normal for Pentium4 computers..

i had on that pc 10.8.5 working without any problems even sleep was working

10.9 was working perfectly too.

i dont have cd dvd rom in it and i cannot try Yosemite

when i want to boot  Sierra i get to Enoch bootloader
i need to use USBBusFix=Yes to get to setup in setup only english is there(no problem for me) getting to selecting drive, i selected drive hit Install, it was working until it kernel panicked..

here is the kernel panic.. sorry for the quality i am using Capture Card to capture screen as i cannot have long enought cable to connect it to my second monitor...

Share this post

Link to post
Share on other sites

now i tried to boot with boot flags -no-zp GraphicsEnabler=No USBBusFix=Yes -v and got other kernel panic.DRAXCfL.png

Share this post

Link to post
Share on other sites

and now i wanted to format it and got Cannot to open device if trying to format it to Mac OS Extended Journaled with flags above

if i want to format it to exFat it works



now it formatted to HFS

and it KP'ed again Ye9eJlC.png

Share this post

Link to post
Share on other sites

i installed clover on usb with help of  dads macbook

i booted from clover in legacy mode, it booted to clover but it looks like it copyied config and theme from sierra install usb.

it booted fine without any boot flags edited, but again kernel panicked same like before..

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting May 2018

    Please donate to support the community.
    We appreciate all donations!


    $35.82 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • I've added every kext possible, Lilu, IntelGraphicsFixup, changed my config settings nothing so far has worked. I tried asking for help on the tony mac forums, but was banned the minute I sent the progress report they asked for, for software piracy. (which makes no sense because any hackintosh is software piracy anyway) but regardless of that, I still have very choppy graphics, and only 4 mb of VRAM, as shown in the about my mac screenshot I linked below. Can anyone help?
    • Hi, 
      I finally decided to install macOS high sierra on my laptop - Lenovo IdeaPad 720S 15IKB.
      It has:   i5-7300HQ, Intel HM175
      12GB DDR4 RAM
      A Samsung 256GB NVMe Drive
      GTX 1050 Ti With Max-Q   The first try did not boot so i had to use some args to get it to boot. The first problem arises due to the fact that all available usb slots are usb 3.1. The installer did not recognise my keyboard and trackpad and i had to install some kexts to get them working. Well, after i intalled the kexts, It was stuck in a boot loop. I was fed up and it was late so i decided to download hackintosh zone from niresh. I would install it later. Well, when i run hackintosh zone it gets stuck at the apple logo after loading. I ran it in verbose mode and it gets stuck in the following   [Date] localhost[1] <Error>: Host-level exception raised: pid = 541, thread = 0xbf1f, exception type = 0xd, codes = { 0 }, states = { 0 }
      busy timeout[0], (240s): 'AppleEFIRuntime'
      busy timeout[1], (240s): 'AppleEFIRuntime'
      busy timeout[2], (240s): 'AppleEFIRuntime'   Then the screen goes blank and it starts over. Any help is appreciated. Thanks!
    • ASUS laptop X550D can run hackintosk ? help me ! please!!!   thanks alot
    • Oh, thank you but in the meantime I thought again and have installed High Sierra instead. It works just fine, put a camera, bluetooth, wifi, all working OK. I only have to solve a little problem when doing restart it freezes but after shutdown it comes up good! I have also Win7 on same mbr disk and I start with the installation usb but I think go over to EasyBCD to make a smoother boot. If your experienced I would appreciate very much any hints for helping me in this direction. 
    • Hello people!😃   I am new to the hackintosh community. I have a old pc at my home running windows 10 pro. Its a Pentium Dual Core 1.6ghz Processor. A 250mb intel HD i-gpu. (No dedicated Graphics card). A 2gb DDR2 ram. 160gb HDD.   Can i install any mac distro on it ?   I don't want to edit videos on it. I just want to start hackintoshing from this, than my laptop & than my friends laptop. Untill i master this art ☺.   Thank you.
  • Download Statistics

    • Files
    • Comments
    • Reviews

    Latest File
    By Niresh

    542    0