Can't see my SSD in Clover Bootloader - Hackintosh Sierra - Hackintosh Zone Jump to content

Recommended Posts

Hi everyone! My pc specs are these:

Dell Optiplex 3010

mobo: Dell 042P49

cpu: i3-3240

gpu: hd2500 (will be added a new gt710 next week)

 

So, I've installed from usb after setting up (I hope correctly) the bios (legacy, uefi doesn't work properly I think) and, even if I've restarted after waiting so long when it said "less than a minute remaining", I can boot just fine into Sierra in my SSD ("Hackintosh") selecting, when I start/restart the pc, boot from Hackintosh.

Everything works fine except graphics (I know hd2500 is not supported so I just bought an used gt710 that will arrive next week), audio (it worked 2 times after setting with clover configurator, then it stopped) and ethernet (I think it's faulty, anyway I've a wifi dongle that works fine).

 

BUT if the usb created with restoreSierra is not connected I can see Clover bootloader but I can't see my SSD "Hackintosh" which is the drive Sierra is installed in.

I'm pretty sure something in post installation (Clover configurator -> Boot section) is missing, these are the steps I made after the automatic initial setup:


Mount EFI partition of SSD (since is not mounted by default)
Install Multibeast in order to install Clover Legacy and fix audio (but it doesn't work anymore, IDKW)
Copy EFI folder from HZ usb
Delete EFI folder from EFI partition of SSD
Paste EFI folder from HZ to EFI partition of SSD

When I restart the pc w/o usb plugged I can't see the SSD, the space over the rounded icons is empty except from BOOT from EFI (and if select it it reload the same thing).

I hope someone could help me, this is my first step in hackintosh world :)

Have a nice day

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting January 2018

    Please donate to support the community.
    We appreciate all donations!



    $49.70 of $120.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Greetings to you all! My hackintosh is running macOS High Sierra 10.13.2 and I was able to fix sleep and shutdown issues with a series of terminal commands. They must be entered in the order listed below. I hope it helps you guys too.

      sudo defaults write /System/Library/LaunchDaemons/com.apple.securityd ExitTimeOut -int 5

      sudo defaults write /System/Library/LaunchDaemons/com.apple.mDNSResponder ExitTimeOut -int 5

      sudo defaults write /System/Library/LaunchDaemons/com.apple.diskarbitrationd ExitTimeOut -int 5

      sudo defaults write /System/Library/LaunchDaemons/com.apple.coreservices.appleevents ExitTimeOut -int 5

      sudo defaults write /System/Library/LaunchAgents/com.apple.coreservices.appleid.authentication ExitTimeOut -int 5
    • Hello, First of all, I'm starting with my pc configuration,    Processor: Core i3-6100 Motherboard: G1 Sniper B7 with 8GB Ram. GPU: AMD Radeon R7 370 So, I want to make my PC in Hackintosh. Is it meet Hackintosh compatibility? And which version should I go with like( Sierra, High Sierra etc.) with Process? I need your help. Thanks in Advance                                                                                                                                                                             
    • I wasn't being lazy, I looked through my whole bios and I couldn't find all the setting you are telling me to change, but I still found some of them. Once I change the settings, what should I do?
    • When I unzip Restore High Sierra I just get the .pkg. I'm not about to install the pkg on my main HD unless I know what it's going to do. 
    • Niresh, first of all, thank you for your help. I can't disable the NVIDIA GPU, even on the BIOS settings, there is no such option. I have even looked on the manufacturer help fórum, there is nothing in that regard. Is there a way to make these DSDT patches on your release? Could you make a guide or a video of it? I tried looking at some guides on tonymacx86.com, but it's too complicated for me (and also, I don't have a running version of MacOS on my computer). https://www.tonymacx86.com/threads/fix-window-server-service-only-ran-for-0-seconds-with-dual-gpu.233092/ https://www.tonymacx86.com/threads/guide-dell-inspiron-14-7460-series-7000-uefi-hotpatch.236039/ 
  • Download Statistics

    • Files
      845
    • Comments
      2,132
    • Reviews
      2,557

    Latest File
    By 8osm3rka

    24    0

×