Please help with clover bootloader install - Hackintosh Sierra - Hackintosh Zone Please help with clover bootloader install Jump to content

Recommended Posts

Hello Guys i'm new here as you can see i have a problem i can install mac os sierra on my pc everything runs ok except cant install bootloader after install no matter which loader use i cant get it up but booting up with loader from pendrive works. Maybe i do something wrong or dont know. also i set everything on bios. All ok install etc.. but having problem configuring loader

Here are my pc specs i would verry appreciate any help with even remote control teamviewer.

MY pc Specs by cpuz 

image.png

image_1.png

image_2.png

image_3.png

image_4.png

 

Share this post


Link to post
Share on other sites

I managed to get it booted and working everzthing looks ok except no hdmi sound i try few tutorials but not working please help. 

Share this post


Link to post
Share on other sites

Please I have the same problem, no boot from HDD after installation,  how have you repaired it?

 

 

 

I have tried this with no success:

 
 
sh-3.2# diskutil list

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *250.1 GB   disk1
   1:                  Apple_HFS OSXSierraHD             250.1 GB   disk1s1


sh-3.2# fdisk -e /dev/disk1
 
fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
 

fdisk: 1> print
Disk: /dev/disk1    geometry: 30401/255/63 [488397168 sectors]
Offset: 0    Signature: 0xAA55
         Starting       Ending
 #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
------------------------------------------------------------------------
 1: AF 1023 254  63 - 1023 254  63 [         2 -  488397166] HFS+       
 2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 
fdisk: 1> flag 1
Partition 1 marked active.
 
 
 
fdisk:*1> print 
Disk: /dev/disk1    geometry: 30401/255/63 [488397168 sectors]
Offset: 0    Signature: 0xAA55
         Starting       Ending
 #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
------------------------------------------------------------------------
*1: AF 1023 254  63 - 1023 254  63 [         2 -  488397166] HFS+       
 2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
fdisk:*1> reinit
In memory copy is initialized to:
Offset: 0    Signature: 0xAA55
         Starting       Ending
 #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
------------------------------------------------------------------------
 1: AF 1023 254  63 - 1023 254  63 [         2 -  488397166] HFS+       
 2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
 4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
Use 'write' to update disk.
 
fdisk:*1> write
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] y
Writing MBR at offset 0.
 
fdisk: 1> update
Machine code updated.
 
fdisk:*1> write
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] y
Writing MBR at offset 0.
 
Please help
Thanx

Share this post


Link to post
Share on other sites

Ok so after install and reboot you can boot again from the pendrive but chose hdd in my case i had to remove boot args from clover menu. once boot up installed clever and depending on your pc specification set correct parameters now if you have nvidia too you will have to install the web drivers and add or replace with the code 

Reboot should work now depending on your board let me know if you succed

  • Mount EFI Partition / If you have installed legacy Clover look into /EFI folder for config.plist
  • Open /Volumes/EFI/EFI/CLOVER/config.plist with text edit, Xcode, or Plist Editor Pro
<key>SystemParameters</key>
    <dict>
        <key>InjectKexts</key>
        <string>YES</string>
        <key>InjectSystemID</key>
        <true/>
        <key>NvidiaWeb</key>
        <true/>
    </dict>

Share this post


Link to post
Share on other sites

Thanks, I will try.

Anyway, I have Nvidia GeeForce 430 and it is working without web drivers, just with nvidia inject

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting May 2018

    Please donate to support the community.
    We appreciate all donations!

    Thanks



    $53.73 of $100.00 goal reached.
    Donate Now
×