[System Crash ] niresh 10.9 - Troubleshooting - Hackintosh Zone Jump to content
  • 0
Mohammad Elayan

[System Crash ] niresh 10.9

Question

hi guys 

 

i try niresh distro yesterday and everything goes fine ,and this is my first time using hackintosh btw

 

i use the nerish usb , booting ok and make a partetion for mac system , and the system installing in my pc i was happy because no problem happens for boot and other problem i have read in this forum

 

after restart the apple logo show up and my speakers work's like you turn on radio without any station and the sound is noisy

 

after that the system stop and showing me this error ( in the attachment )

 

i try to fix the problem but am new in hackintosh  <_< . i remove the system and try to change some customize setting 

 

and all time the same

 

is there any hope to install it without any problem 

 

 

please help me guys

 

 

my pc spec

 

Mother board:  intel , product name DH67CL

CPU :  i7 2600k

Gfx : Radeon HD 4780 X2

 

post-24364-0-35831700-1393250617_thumb.j

Share this post


Link to post
Share on other sites

18 answers to this question

Recommended Posts

  • 0

@  thank you for reply :)

 

yes i try 10.9.x the system already booting and i install it , after that when i enter to osx the system give me that error 

 

multibeast can help me with this issue ?

Share this post


Link to post
Share on other sites
  • 0

@  thank you for reply :)

 

yes i try 10.9.x the system already booting and i install it , after that when i enter to osx the system give me that error 

 

multibeast can help me with this issue ?

 

The answer is YES, usually some systems are capable to boot the first time after install but if you don't make some changes in kexts placed in S/L/E The system won't boot up correctly again. (npci=0x3000 or npci=0x200) boot flags may help also. (Install flags may not be the same to regular boot)

1. First try this flags (first one and if don't boot up then the other) If don't boot up correctly do the next step:

 

2. Format drive in HFS+ non case sensitive and customize the install checking parts what you have. Finish install and start OSX first time, before do nothing, Install Multibeast and execute " auto mode" .

 

Tell us your results! 

Share this post


Link to post
Share on other sites
  • 0

ok i download the multibeast 

 

and i want to format my pc and install mac osx again , and after that how can i use the multibeast i cant open the mac osx ?

 

and what is the auto mode ? is there any article for that 

Share this post


Link to post
Share on other sites
  • 0

Multibeast is used on the first boot after install. (You can use it later of course)

 

If you can't enter OSX try to boot once OSX is installed with these flags: 

-v -x npci=0x2000 GraphincsEnabler=No cpus=1

"Auto Mode" in Multibeast is clicking DSDT Free: 

 

post-11455-0-25702300-1393348565_thumb.p

Share this post


Link to post
Share on other sites
  • 0

this mac osx work fine after entering the code in booting

 

and open in safe mode now i will copy multibeast in my flash memory and try to install it

 

but i have questions

 

i have issue in boot == boot0

 

and i can't enter to windows again :(

 

and about sound card and graphics

 

is there any support from hackintosh to Radeon Hd 4780 x2 ?

 

Share this post


Link to post
Share on other sites
  • 0

i can't open any media through mac !!! like flash memory or other hardisk 

 

i try to format the other extention to fat32 to put multibeast on it and when i boot to mac using above boot flag i cant find any media 

 

i try to burn multibeast on a dvd and i can't read it on mac what the hek is thaat !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting

    Please donate to support the community.
    We appreciate all donations!



    $62.87 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • I am fairly new to the idea of creating hackintoshes but I would love to dual boot Windows 10 and Mac OS Sierra on this machine listed below, will it be possible? Thanks in advance   Case CORSAIR OBSIDIAN SERIES™ 750D FULL TOWER CASE Processor (CPU) Intel® Core™i7 Ten Core Processor Extreme i7-6950X (3.0GHz) 25MB Cache Motherboard ASUS® RAMPAGE V EDITION 10: E-ATX, USB 3.1, SATA 6 GB/s Memory (RAM) 32GB HyperX PREDATOR DDR4 3200MHz X.M.P (4 x 8GB) Graphics Card   Asus Republic Of Gamers Strix NVIDIA GTX 1080 1st Hard Disk 480GB BiWIN 2.5" SSD, SATA 6 Gb/s (upto 564MB/sR | 513MB/sW) 2nd Hard Disk 6TB SATA-III 3.5" HDD, 6GB/s, 7200RPM, 128MB CACHE DVD/BLU-RAY Drive 16x BLU-RAY WRITER DRIVE, 16x DVD ±R/±RW & SOFTWARE Power Supply CORSAIR 1000W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET Power Cable 1 x 1 Metre UK Power Cable (Kettle Lead) Processor Cooling Corsair H100i V2 Hydro Cooler w/ PCS Liquid Series Ultra Quiet Fans Thermal Paste ARCTIC MX-4 EXTREME THERMAL CONDUCTIVITY COMPOUND Extra Case Fans 2x 120mm Apache Black Quiet Fan (fitted to extract from rear/roof)     Sound Card ONBOARD 8 CHANNEL (7.1) HIGH DEF AUDIO (AS STANDARD) Wireless/Wired Networking 10/100/1000 GIGABIT LAN PORT (Wi-Fi NOT INCLUDED) USB Options MIN. 2 x USB 3.0 & 6 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS Operating System Genuine Windows 10 Professional 64 Bit - inc DVD & Licence Operating System Language United Kingdom - English Language DVD Recovery Media Windows 10 (64-bit) Professional DVD with paper sleeve Office Software NO OFFICE SOFTWARE Anti-Virus NO ANTI-VIRUS SOFTWARE Browser Google Chrome™ Warranty 3 Year Silver Warranty (1 Year Collect & Return, 1 Year Parts, 3 Year Labour) Delivery STANDARD INSURED DELIVERY TO UK MAINLAND (MON-FRI) Build Time Standard Build - Approximately 7 to 9 working days
    • hii i am using samsung laptop intel i3   M370   2.40 Ghz  nvidia geforce  M315  graphics when i boot from usb,  firstly show some code and after this show a dialog box . in this box , showing a phone and laptop, one by one. on the top of the screen, showing apple logo and "Language Chooser". i am not able go next step.   plz help me.
    • Hi guys, I installed the Hackintosh Sierra Zone image and most things work except my graphics. It detects as AMD R9 290X when I use FakeID 0x67B01002 on boot, however I only get 7MB of VRAM with no QE. My screen also tears as well. Hope someone can help me - Intel Core i5 2500K - AMD R9 290X 4GB - ASUS P8Z77-V LX
    • Hey guys, I'm looking into dual booting OSX Sierra or High Sierra on my ASUS Zenbook Pro UX501V. I use a lot of mac only software like sketch at uni and it would make my life a lot easier to just be able to boot into it instead of going to campus to use one of their Mac's. I'm currently running windows 10 and would prefer to not have to lose all my files or reinstall windows 10, however if this is unavoidable I would consider it. Specs are Processor    Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz, 2592 Mhz, 4 Core(s), 8 Logical Processor(s)
      GPU    NVIDIA GeForce GTX 960m 4gb DDR5
      RAM    12GB DDR4
      BIOS Version/Date    American Megatrends Inc. N501VW.300, 9/05/2016
      BIOS Mode    UEFI Does anyone know of any guides? Or has done this before? Even a link to point me on my way. Looked into the clover bootloader and I'm under the impression that's the route I'll have to take. Thanks for any help you may have      
    • Hi everyone. Here are my specs MOBO :Gigabyte Z68 XP UD3 (1155) GPU : HD 6870 1gb CPU Intel i7 2600k (1155) 60gb SATA SSD   MOBO is using legacy Bios. This machine has served me well for years. I tripped a circuit breaker a few weeks ago and now it's stuck in a boot loop. I have setup a new bootable USB to reinstall but for some reason the boot loop is happening when I startup from this as well. I can manage to get to the desktop using the safe mode boot flag (-x) but after a few moments, the desktop freezes and the computer reboots. I used the 10.10.1 disc image to create the new USB stick I am not sure if this could be causing the boot problem in the USB. Should I have used the 10.10.0? At first I suspected a hardware issue but I left the computer on for two days at in the bios screen and it stayed on just fine. Hoping someone can give me a hand figuring out which boot flags can get me going again or how I can reinstall the OS. I really need to get past the freeze/reboot cycle I am in. I am almost ready to nuke this thing and install windows
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,538

    Latest File
    By rembrandt63

    328    0

×