Asus u56e-bbl6 wireless issue - OS X Maverick Zone Hackintosh 10.9.0 - Hackintosh Zone Jump to content
  • 0
tomalexander86

Asus u56e-bbl6 wireless issue

Question

Hello I am new to this site. I successfully tripled booted Niresh Mavericks, Windows 8.1 and Zorin OS 8 based off Ubuntu. I have Maverick installed and works great, but I cannot seem to find a kext to make wirless work. I installed Multibeast and the all in one network app. The network app only has kexts for ethernet though. If I could get some help on this I would greatly appreciate it. Thanks for your time.

Share this post


Link to post
Share on other sites

2 answers to this question

Recommended Posts

  • 0

hello i have the same problem and i am would like some help with this.... i want to install mac on my laptop. although i have an asus U56E-RBL6.

   I will include any information that might be helpful including a thourough list of information from windows device manager

 

   my computer specs include:

 

processor: Intel core I3-2330m 2cores 4 logical proccessors

Ram:         6 gb stock ram

 

 

 

the wireless card is an intel centrino wireless n 1030 with the following Information listed as displayed in device manager under windows.

 

PCIVEN_8086&DEV_008A&SUBSYS_53058086&REV_34

PCIVEN_8086&DEV_008A&SUBSYS_53058086

PCIVEN_8086&DEV_008A&CC_028000

PCIVEN_8086&DEV_008A&CC_0280

 

-It also Has the following "compatible IDS"

 

PCIVEN_8086&DEV_008A&SUBSYS_53058086&REV_34

PCIVEN_8086&DEV_008A

PCIVEN_8086&DEV_008A&CC_028000

PCIVEN_8086&DEV_008A&CC_0280

PCIVEN_8086

PCICC_028000&DT_0

PCICC_028000

PCICC_0280&DT_0

PCICC_0280

 

-its hardware location path is listed as

 

PCIROOT(0)#PCI(1C01)#PCI(0000)

 

-the location information says this:

 

Pci Bus 2, Device 0, function 0

 

-Physical Device Object Name:

NTPNP_PCI0013

 

-Power Data:

 

   Power Capibillities:

  0000000089

  PDCAP_D0_SUPPORTED

  PDCAP_D3_SUPPORTED

  PDCAP_WAKE_FROM_D3_SUPPORTED

 

   Power state Mappings:

   S0 ->D0

   S1&S2 -> unspecified

   S3,S4,&S5 ->D3

 

 

There is also a property listing that looks like it has a guid or something with some hex data

____________________________________________________________________________

 

I did some searching in the dsdt table and the vendor id is listed under the method _Q84

 

i attached the unmodified dsdt to this post in case you need it.

dsdt u56e-RBL6 vanilla.zip

 

if you have any questions you can contact me here at the forums or at jormor87013@me.com

i would so appreciate it if you could help me with this... and it will help others with this problem too

 -thanks

     Jordan M.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
    • Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks 
    • I have faced that problem to however does not  help with my current situation. ... I deleted other partitions and created Jhfs+ on the MBR no problems at all Still remains. Can NOT install on MBR natively as suggested ..... I have no reason to make this up    Any suggestions to get this working would be good. 
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×