Stops on Apple Logo/ Restarts before installation - OS X Maverick Zone Hackintosh 10.9.0 - Hackintosh Zone Jump to content
  • 0
Anmol Filmeindiene

Stops on Apple Logo/ Restarts before installation

Question

Hi

I have pc:

 

Intel i7 4770k

16 GB RAM DDR3

1TB HARD DRIVE

500GB HARD DRIVE

160GB HARD DRIVE

 

I cant install Mac, somethimes it restarts, before installitions

Sometimes its stops on aPPle logo, can you help me?

Share this post


Link to post
Share on other sites

58 answers to this question

Recommended Posts

  • 0

Lol, Its not a new type of BIOS but called UEFI. And why so much toggling in your sentence?

Anyway, Need a bit more detail to talk.

Its 160 gb SSD, right? What is your Graphic Card?

Better tell your laptops model name if you can't post detail.

Share this post


Link to post
Share on other sites
  • 0
cheskune    0

I thought I should post in here instead of making a new topic. Hopefully, it can aid both of us in our struggle.

 

I have a MSI GT70 20D-064US. It contains an i7-4900mq, GTX780m, 32Gb of 1600 ram, and I'm installing everything onto a Crucial M500 msata 240GB. After doing some research, I've found it to be compatible. I created the USB stick without a problem, setup the bios like I was supposed to, and I booted through the USB stick and clicked Niresh-Mavericks, but just two seconds after the Apple logo pops up before the installation my computer resets. It seems to be the exact scenario nalsur2013 is having.

Share this post


Link to post
Share on other sites
  • 0
cheskune    0

It went through about a page and a half of loading whatever it was doing but it blacked out and reset before it even got to the Apple logo this time.

Share this post


Link to post
Share on other sites
  • 0
cheskune    0

Same thing happened. It loaded a few things, went black, no apple logo, and reset. This seems a bit baffling as to the root of the problem.

Share this post


Link to post
Share on other sites
  • 0

Sounds like the stubborn kid. kidding ;)

 

Use -v -x GraphicsEnabler=No PCIRootUID=1

 

 Try combination of YES or No for GraphicsEnabler and 1 or 0 for PCIRootUID.

 

Total attempts 4 times.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. CPU: AMD FX 8350 (8-core)
      RAM: 12GB HyperX Fury
      Motherboard: AsRock Fatal1ty 990FX Killer
      GPU: Gigabyte 4GB NVIDIA GTX 960
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×