AppleNForceATA.kext KP at boot - OS X Maverick Zone Hackintosh 10.9.0 - Hackintosh Zone Jump to content
  • 0
bernard321

AppleNForceATA.kext KP at boot

Question

bernard321    0

AppleNForceATA.kext KP at boot


Hello, I hope you can help me……


I am trying to install Mavericks on a Mobo with nVidia nForce 3 250 chip
0x00e310de
I boot amd64 -v
and I get a KP at boot relevant with

com.nvidia.driver.AppleNForceATA(1.0.4)
    dependancies.com.apple.iokit.IOATAFamily(2.5.2)
    dependancies.com.apple.iokit.IOPCIFamily(2.8)
see screenshot

If I look at extensions.mkext on the Niresh  USB key
I found AppleNForceATA.kext at version 1.0.4 asking for
IOATAFamily(1.0.0)
IOPCIFamily(1.0.0)
So it can't work because loaded
IOATAFamily is 2.5.2
and IOPCIFamily is 2.8

It seems that AppleNFORCEATA.kext can't be loaded.

Do you have any track to try ?
Thanks

post-8739-0-26026400-1399627594_thumb.jp

Share this post


Link to post
Share on other sites

7 answers to this question

Recommended Posts

  • 0
Niresh    2,312

@bernard321 hmm hard problem probably hard to solve :(

cause its built in kext causing the problem 

 

it could be a kernel problem too 

in that case

try the alternate kernel 

amd, amd64 & amdfx

Share this post


Link to post
Share on other sites
  • 0
bernard321    0

@ Kingmaster

 

thanks for your answer

I already tested before amd & amdfx : boot stops.

Only amd64 goes further (I have an AMDX2 64 CPU)

 

I tested latest version of AnV and Brazovia kernels

same KP as in first post.

 

This is really an insatisfied dependencies problem

and I don't know how to solve it.

I already edited kext content but here I don't know where to start

 

Any help will be appreciated.

Share this post


Link to post
Share on other sites
  • 0
Niresh    2,312

@bernard321 @si.ananth 

try the kernel with additional kernel flag

cpus=1

Share this post


Link to post
Share on other sites
  • 0
si.ananth    0

i did it ., but now it showing PCI Pairity error  f1 to continue f2 reboot ,., (screen freez unable to select f1 or f2)  @

Share this post


Link to post
Share on other sites
  • 0
Niresh    2,312

@si.ananth Im not sure, but in your motherboard connect hard disk to the first SATA Port & try again

Share this post


Link to post
Share on other sites
  • 0
shahram    3

I have this problem too. but mine is a little bit different.

M/B is asus M4N68T ( nForce chipset ) and it has no AHCI mode. ( Although some peoples say RAID is same as AHCI in this kind of M/B ) so

I tried to install 10.9 and mine was stopped at :

AppleNForceATA: found 0 units.

Still Waiting for root device

Still Waiting for root device

Still Waiting for root device

Still Waiting for root device

.

.

.

and it continues with no result after 20 minutes waiting.

( I tried any boot flag and any BIOS setting that was possible in my M/B )

I will be thankful for any solution.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. My motherboard is an AsRock Killer Fatal1ty 990FX.
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×