Hp Pavilion dm4-3029tx Graphic & Network Problem - OS X Mavericks 10.9 - Hackintosh Zone Jump to content
  • 0

Hp Pavilion dm4-3029tx Graphic & Network Problem


HP Pavilion dm4-3029tx Beats Edition Entertainment Notebook PC


 Processor Name: Intel Core i7

  Processor Speed: 2.79 GHz



i have just finish install MacOSx Mavericks 

two problem i encounter


1. i accidentally install Intel Graphics Patch for Mixed Configurations from MultiBeast  

    Problem : after i reboot my Laptop and when i surf the net it is not smooth scrolling , youtube video flicker a lot , graphic problem at the website and unable to install flash as it always occur problem and refresh , how do i remove it? ( before i install that it was fine)


laggy too


2. i need to install driver such as WIFI  , I tried to install All in one Ethernet solution and it is not working


help please thanks you



Product Number B0N85PA

Microprocessor 2.8 GHz Intel Core i7-2640M

Microprocessor Cache 4 MB L3 Cache

Memory 4 GB 1333 MHz DDR3

Memory Max Supports up to 16 GB DDR3

Video Graphics AMD Radeon HD 7470M (1 GB GDDR5 dedicated)

Display 14" HD BrightView LED-backlit Display (1366 x 768)

Hard Drive 750 GB SATA (5400 rpm)

Multimedia Drive SuperMulti DVD±R/RW with Double Layer Support

Network Card Integrated 10/100/1000 Gigabit Ethernet LAN

Wireless Connectivity Bluetooth

Intel 802.11 b/g/n



this is what i found at the system profiler : AMD Radeon HD 6470M Series

                                                 Intel HD Graphics 3000


how to get more detail information of my hardware?

as system profiler only show my Bluetooth and Ethernet

Share this post

Link to post
Share on other sites

5 answers to this question

Recommended Posts

  • 0
On 7/19/2014 at 0:53 PM, sloeberGJ said:

Read this:


i have edited my post


how do i get more detail specification? thanks

Share this post

Link to post
Share on other sites
  • 0

There is a graphics kext/patch posted in the grapics section under ati.

I need more specs on the ethernet. For me to give you a fitting kext. You can send me the vendor and dev id via ioreg.

Share this post

Link to post
Share on other sites
  • 0

There is a graphics kext/patch posted in the grapics section under ati.

I need more specs on the ethernet. For me to give you a fitting kext. You can send me the vendor and dev id via ioreg.


the graphics  should i use according to the specification or the system profiler?

 i have search the graphics under the ati 


i can't find the model AMD Radeon HD 6470M Series

and i found many 7000 series which don include AMD Radeon HD 7470M


the my wireless  i have use ioreg but i not sure under which catagory as i search wireless it appear

wireless control device and the vendor ID is 0x8086 and the product id is 0x189

Share this post

Link to post
Share on other sites
  • 0

please which process did use to install it? cause i can't install anyone on pavilion m7 please reply thanks.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals


    Please donate to support the community.
    We appreciate all donations!

    $54.09 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, I installed the Hackintosh Sierra Zone image and most things work except my graphics. It detects as AMD R9 290X when I use FakeID 0x67B01002 on boot, however I only get 7MB of VRAM with no QE. My screen also tears as well. Hope someone can help me - Intel Core i5 2500K - AMD R9 290X 4GB - ASUS P8Z77-V LX
    • Hey guys, I'm looking into dual booting OSX Sierra or High Sierra on my ASUS Zenbook Pro UX501V. I use a lot of mac only software like sketch at uni and it would make my life a lot easier to just be able to boot into it instead of going to campus to use one of their Mac's. I'm currently running windows 10 and would prefer to not have to lose all my files or reinstall windows 10, however if this is unavoidable I would consider it. Specs are Processor    Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz, 2592 Mhz, 4 Core(s), 8 Logical Processor(s)
      GPU    NVIDIA GeForce GTX 960m 4gb DDR5
      RAM    12GB DDR4
      BIOS Version/Date    American Megatrends Inc. N501VW.300, 9/05/2016
      BIOS Mode    UEFI Does anyone know of any guides? Or has done this before? Even a link to point me on my way. Looked into the clover bootloader and I'm under the impression that's the route I'll have to take. Thanks for any help you may have      
    • Hi everyone. Here are my specs MOBO :Gigabyte Z68 XP UD3 (1155) GPU : HD 6870 1gb CPU Intel i7 2600k (1155) 60gb SATA SSD   MOBO is using legacy Bios. This machine has served me well for years. I tripped a circuit breaker a few weeks ago and now it's stuck in a boot loop. I have setup a new bootable USB to reinstall but for some reason the boot loop is happening when I startup from this as well. I can manage to get to the desktop using the safe mode boot flag (-x) but after a few moments, the desktop freezes and the computer reboots. I used the 10.10.1 disc image to create the new USB stick I am not sure if this could be causing the boot problem in the USB. Should I have used the 10.10.0? At first I suspected a hardware issue but I left the computer on for two days at in the bios screen and it stayed on just fine. Hoping someone can give me a hand figuring out which boot flags can get me going again or how I can reinstall the OS. I really need to get past the freeze/reboot cycle I am in. I am almost ready to nuke this thing and install windows
    • i also have this problem if you will finde the solution please inform me right away and thank you
    • I built a Hackintosh on a GIGABYTE GA-EP45-UD3P in 2010, and upgraded it to Sierra about 4 months ago. It's been working great until a few days ago.  The clock now is losing time, while the computer is on and running. I've been working on the computer all morning, and have had to bump it forward to the current time it 3-4x. Right now it says 9:40am, but it's really 9:47am.  I have "Set time and date automatically" set in settings and "Apple Americas/U.S. (time.apple.com.)" selected on the drop down. Deselecting it, and selecting it again, brings the clock back to the current time.  Is this a hardware issue or a software issue? Do I have to replace the CR2032 on the motherboard? If so - why? The computer is on, and running, why would it need that battery to maintain the time?       
  • Download Statistics

    • Files
    • Comments
    • Reviews

    Latest File
    By rembrandt63

    314    0