10.9 + nvidia GeForce 210 failing - Hackintosh Mavericks - Hackintosh Zone Jump to content
cr4nberry

10.9 + nvidia GeForce 210 failing

Recommended Posts

- CPU ( Intel Core 2 Duo 2.93 GHz)
- Graphic Card by exact name (nVidia GeForce 210 1GB DDR3)

- RAM Kingston 2 x 2GB 1066 Mhz DDR3
- MotherBoard Chipset (North Bridge: Intel G41 [Gigabyte GA-41M Combo] )
- Wlan (None)

- Ethernet (Realtek AR8151)
- Audio Card (VIA VT1708S)

 

Hi there!

First I was happy with my 10.9.2 Mavericks. I could even play Starcraft2 flawlessly

Then, a software update failed and wouldnt boot again.

So, I decided to reinstall again 10.9 but this time the screen went dark every time I booted.

www.hackintosh.zone/hackintosh/articles/how-to/fix-grey-screen-black-screen-mac-os-x-installation-hackintosh/

I followed the instructions in that post, and I could make it to the Desktop, but with the Graphics Card not working properly, since is detected as a default. The screen flickers every time something moves.

Do you guys have an idea to get the card working again?

I think that if the backup drivers are restored could bring again the problem.

Share this post


Link to post
Share on other sites

Did you backup the drivers before you installed, the software update? Because then you can simply put them back. If you stil know the source, download and reinstall the kexts.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting February 2018

    Please donate to support the community.
    We appreciate all donations!



    $48.99 of $120.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • So I tried to install Mac OS X Sierra on my computer with the following specs :   - Intel Core i5 650 3.20GHZ - 12GB RAM DDR3 - 2 HDD (.1TB , 250GB ) - Nvidia Geforce 210 1GB VRAM DDR3   Everything was cool at first the installation went smoothly with no problems, after setting up everything I noticed that the graphics card has been detected by the systems but there is no acceleration and the resolution is 1024x768, I couldn’t change it   I tried a lot of kext drivers from multiple websites but no success, last kext crashes my os, I start getting black screen after the login page, and the computer restart it self immediately, so I decided to mess with the clover options to find if I can enable the graphics card from there, and WALLAA, the magic happened, I went to clover options then > Graphics Injector Menu > I checked : InjectNvidia option, and I checked : Use NVIDIA WEB Drivers   Note : I already installed Nvidia web drivers previously so you do that too before trying this method   After the restart it took longer then the usual to boot up, but once it got to the login page I noticed that the acceleration is working perfectly and the graphics has no bugs like before.   So until now everything is working fine and I’m enjoying my experience with Mac Sierra  
    • HI, I have the same issue. I have integrated Intel HD4000 and nVidia 620m. I tried with IGPEnabler, GraphicsEnabler and nv_disabled bootflags but none of them helped, it just got me additional kernel panic "AppleUSBHostPort: :disconnect: persistant enumeration failures". I also don't have option to turn off any of my graphic cards in BIOS.  Is there any solution to this issue?
    • ya no documentation ..and iam so confused to ..can some one make tutorial
    • Desktop Specs 
      Mob-: MSI X99a Godlike Gaming (MS-7883) (supports Legacy+UEFI)
      CPU- Intel 5820k (Haswell E)
      Graphics- MSI 980ti
      Ram- Avexir ddr4 8x4gb also, i have attempted using: OsxAptioFix2Drv-free2000.efi At the moment i typically get stalled with: Only single RAM bank (128 bytes) and some times I am getting: Couldn't allocate runtime area.
      Any advice would be greatly appreciated as im scratching my head wondering what the problem is - currently going to reformat the usb and start a new.
    • getting error (iobluetoothhcicontroller) (searchfortransporteventtimeouthandler) (missing bluetooth controler) apple loading bar stuck in middle if i boot normally. So i tried these  boot flags npci=0x2000 -v npci=0x3000 -v  -x-v PCIRootUID=1 -v PCIRootUID=0 -v still same error ?? Stuck in loading bar any solution?? thanks Acer Aspire 5733 (pew71) 

      Core i5 m560 @ 2.67 Ghz
      Intel HD Graphics
      Atheros AR5B125 Wifi
      Broadcom Net Link
      Realtek HD Audio
  • Download Statistics

    • Files
      848
    • Comments
      2,135
    • Reviews
      2,568

    Latest File
    By Vale1831

    2    0

×