Kernel Panic (cpu 1 caller 0xffffff800064b94a) - Hackintosh Mavericks - Hackintosh Zone Jump to content
  • 0
mobix

Kernel Panic (cpu 1 caller 0xffffff800064b94a)

Question

Been trying to install Niresh on my Dell D830 but running into Kernel Panic. Tried installing with following flags:

npci = 0 -v -f PCIRootUID=0
-v -x GraphicsEnabler=Yes
-v -x GraphicsEnabler=No
-x -v -f acpi=off PCIRootUID=0
-x -v -f acpi=off PCIRootUID=0 GraphicsEnabler=No
USBBusFix=Yes -x -v

Laptop config is:

CPU: Intel Mobile Core 2 Duo T9500 Penryn Socket P
RAM: 3GB DDR2
Graphics: NVIDIA Quadro NVS 135M

 

Screengrab: http://imgur.com/FtE8rMr

 

Any help is greatly appreciated.

Share this post


Link to post
Share on other sites

4 answers to this question

Recommended Posts

  • 0

Is there any quotations after  0xffffff800064b94a? Try adding -v cpus=2, if it fails, boot into safemode with -v cpus=2

 

Yes, it says "A kext releasing a(n) OSArray has corrupted the registry. "@/SourceCache/xnu/xnu-2422.1.72/libkern/c++/OSObject.cpp:218

 

Tried with -v cpus=2 and -v cpus=2 -s but still going into kernel panic.

Share this post


Link to post
Share on other sites
  • 0

Yes, it says "A kext releasing a(n) OSArray has corrupted the registry. "@/SourceCache/xnu/xnu-2422.1.72/libkern/c++/OSObject.cpp:218

 

Tried with -v cpus=2 and -v cpus=2 -s but still going into kernel panic.

Did you load Niresh onto a USB, or did you burn it onto a DVD? Either way, it sounds like something was corrupted during the process. Re download Niresh and perform a fresh install with that, make sure the correct kernels (if any) are selected. The motherboard (HN195) may not be compatible (only 256MB of video memory). Also - Try going into your BiOS, and disabling your Wifi then retry the installation. 

Share this post


Link to post
Share on other sites
  • 0

Did you load Niresh onto a USB, or did you burn it onto a DVD? Either way, it sounds like something was corrupted during the process. Re download Niresh and perform a fresh install with that, make sure the correct kernels (if any) are selected. The motherboard (HN195) may not be compatible (only 256MB of video memory). Also - Try going into your BiOS, and disabling your Wifi then retry the installation. 

 

Loaded Niresh onto a USB. Is there no MD5 checksum avaiblable to check size of downloaded file?

Tried with disabling WiFi, but no success.

Thanks for your help.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting

    Please donate to support the community.
    We appreciate all donations!



    $80.78 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Hi, everyone, thanks for your time.
      I'm trying to fresh install macOS 10.13.1 (Build 17B48). I'm trying to do this by free myself from multibeast and by put kexts in EFI/CLOVER/kexts/10.3 and set a good config.plist.

      I have this famous issue in verbose mode and can't boot.
      IOConsoleUsers: time(0) 0->0, lin 0, llk 1,
      IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0
        It's looks like your own issue.

      Every time, i can boot the first time. I start my post-install by install the web drivers automatically served by Nvidia. And never be able to boot again…
      I didn't found any plist option that permit to boot over this issue…
      help… !

      My list of kexts and my config.plist is joined.
      Thanks for your time…


      Here are my list of used kexts kexts/10.13 folder : NvidiaGraphicsFixup.kext    v 1.1.3 AppleALC.kext
      AtherosE2200Ethernet.kext    v 1.2.0
      FakePCIID_XHCIMux.kext        v 2.2.1
      FakePCIID.kext            v 1.3.9
      FakeSMC_ACPISensors.kext    v 6.25-333-g05e0f4be.1759
      FakeSMC_CPUSensors.kext        v 6.25-333-g05e0f4be.1759
      FakeSMC_GPUSensors.kext        v 6.25-333-g05e0f4be.1759
      FakeSMC_LPCSensors.kext        v 6.25-333-g05e0f4be.1759
      FakeSMC.kext            v 6.25-333-g05e0f4be.1759
      HDMIAudio.kext            v 1.0
      IntelMausiEthernet.kext        v 2.3.0
      Lilu.kext            v 1.2.0
      Shiki.kext            v 2.0.5
      USBInjectAll.kext        0.6.2 Driver64UEFI folder apfs.efi
      AppleImageCodec-64.efi
      AppleKeyAggregator-64.efi
      AppleUITheme-64.efi
      DataHubDxe-64.efi
      EmuVariableUefi-64.efi
      FirmwareVolume-64.efi
      FSInject-64.efi
      HFSPlus.efi
      NTFS.efi
      OsxAptioFix2Drv-64.efi
      OsxFatBinaryDrv-64.efi
      SMCHelper-64.efi
      VBoxHfs-64.efi

      Gigabyte GA-Z170X-Gaming 5 | i7-6700(not K) | GTX980ti - OS on SSD.
    • Hi everyone, i got acer Aspire Icore 3 Laptop, and i've trie many installs, however, none of those worked on this laptop, even typing -x -v, never get the install menu, some of the run until the screen flash and reboot's again and again,, Anyone can give me a tip, i would try Yosemite, cause i got MacBook 5.1 can't upgrade to sierra/High Sierra ( well i can with a patch, but can't get the sierra installer ) i've put all the laptop specs on the screenshot.  i think all is components are compatible with mac,, above. Thanks in advance.file:///Users/Memphis/Downloads/Acer specs.png  
    • i am trying to install yosemite on a asus m2n sli deluxe chipset NVIDIA amd Athlon 64 X2 5600+ ATI Radeon HD 4800   and still i am stuck at pci configuration begin or console error. i tried several kernels and graphic cards with no results   i found some kext (no pci ea) now i come to the screen with language. and then it freezes   I’ve tried several thing but i am stuck is there anyone that can help
    • I've created install media with MacPawn as well as with Unibeast from High Sierra AppStore DMG ; The USB disk creation went smoothly, but when I try to boot from these disks all I get is a blinking cursor on top left of the screen, nothing else ... My Mac / Hackintosh : Asus P5Q Intel Core 2 Quad CPU Q8300 @ 2.50 GHz 8,00 GB RAM AMD Radeon HD 6450 Legacy IDE / ATA : 200 GB SATA : 320GB SSD : Kingston 120GB
    • Please install Niresh Yosemite now, at the first boot after installation i have full resolution with the intel hd 3000. after repairing permissions etc etc, i do not have any more acceleration at the new reboot. Sometimes by booting pennete I have acceleration graphic, starting from hard disk n. Ah, I got the Chameleon bootloader
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,539

    Latest File
    By rembrandt63

    418    0

×