[Success] Mavericks 10.9.4, ASRock z77 Pro, GTX 650ti, GT520, i5-3570k - Mavericks - Hackintosh Zone Jump to content
Allude

[Success] Mavericks 10.9.4, ASRock z77 Pro, GTX 650ti, GT520, i5-3570k

Recommended Posts

Hello,

 

I thought it would be helpful for other people to post my experience, and just a note this is my first hackintosh. I also read up on a lot of guides, and don't remember all of them, so sorry in advance for not giving you credit. 

 

My PC setup that I used to run Windows 7:

ASRock Z77 Pro 3

Intel i5-3570k 3.4 GHz

Gigabyte GTX 650Ti 2GB

Gigabyte GT 520 1GB

 

So here's a guide on how I got 10.9.4 working on my rig from clean Mavericks 10.9.0 , I doubt I'm doing it perfectly so you if you see something pointless please reply back.

 

First: ASRock z77 Pro3 bios 1.90 patched 

http://www.tonymacx86.com/mountain-lion-desktop-guides/96604-guide-asrock-z77-pro3-bios-1-90-patched.html

Here's a direct link to the firmware 

 

Second: Install Mavericks

The Unibeast way...

 

Third: On Restart start system with "-s" boot flag

The updates kept giving me a white screen so I followed this guide from this post.

 
reboot with -s boot-flag
then type
these and press enter
fsck -fy
mount -uw /
grafix backup all
reboot
 
After the restart you should be able to boot into Mavericks without any boot flags.
 
Fourth: Installed Updates, one by one. (Not sure if it'll work with just the 10.9.4 combo, I didn't try)
Download the updates: 10.9.1, 10.9.2 (not the combo), 10.9.3 (not the combo), 10.9.4 (combo)
When you restart, make sure you run the "-x" boot flag, especially for the 10.9.3 update. 
 
Fifth: Kext Wizard + Terminal + Multibeast 6.4.2
Using the Kext Wizard, in the Installation tab, drag and drop using the Finder, all the kexts from "Backup/Kexts/*" and "Backup/Graphic-Kexts/nVidia/*" in the box under "Select kexts to install" . (These are the kexts that "grafix" backed up).
 
I also removed the HDGraphics and Bluetooth kexts cause I think it was causing me problems. http://www.tonymacx86.com/418-os-x-10-9-3-update.html?p=811107#comment_811107. 
It's not exactly as that guide, but in Terminal I entered:
 
Type: sudo -s
Type: sudo cd /System/Library/Extensions
Type: sudo mkdir backup
Type: sudo mv AppleIntelHD* AppleIntelF* IOBluetooth* backup/
Type: sudo touch ../Extensions
 
Using Kext Wizard, in the Maintenance tab, select "System/Library/Extensions" and click the "Execute" button.
 
Using Multibeast do this:
 
Now restart and if you're religious give a little prayer. Hopefully you now have your new Hackintosh ready to go!
 
 
Other Information:
About this Mac / System Info  https://i.imgur.com/Ffjjw2n.png
org.chameleon.Boot.plist https://i.imgur.com/kaRobHd.png
System Info > Graphics/Display https://i.imgur.com/9Eg1NQs.png
 
 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting February 2018

    Please donate to support the community.
    We appreciate all donations!



    $62.51 of $120.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Hello! Yesterday I successfully installed Yosemite (Yosemite Zone distro) on my laptop (Sony Vaio FIT 15E with an i3-3217U). The only thing that doesn't work is the wifi card (BCM43142). I found in my house another wireless card, AzureWave AW-NB047H. Is this wireless card compatible with macOS?   Sorry for my bad english and thanks in advance. ~IOStream
    • i have installed sierra on my acer aspire e14 e5 - 475G 59C7 with processor i5-7200u 2.5GHZ  nvidia geforce 940MXX 2GB  4GB DDR4  when i install i disabled "move nvidia.pkg" "ati.pkg" "intel.pkg" installed works, but when i type something it gone too far. for example i just type "a" in 0.5 seconds it shows "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" anyone know how to fix this?        
    • Hello,
      On High Sierra 10.13.1 under VMWare.
      I install Final Cut Pro 10.4 when running got this error:
      This graphics configuration does not support hardware acceleration, which is required to run Final Cut Pro.
      My GPU is: AMD Radeon R7 240 but show on Hachintosh About : Graphics: Display 128 MB. Thank you for help.
    • I got same error 4 years later. On High Sierra. What's the solution? What you suggested doesn't work. Why does this happen? Any ideas?
    • Hi there. I have the exact laptop and was able to install MacOS HS on it and boot up. I followed tonymaxx086 instructions but.... the following are NOT working as yet.... 1) Keyboard and trackpad (although usb kb and mouse work)
      2) Backlite control (screen appears to be in battery mode - dimmed)
      3) Sound
      4) Wifi 
      5) battery? I am able to access the internet and browse ok using Safari. I want to resolve #1 and 2 before I resolve the rest, but I am having an issue to determine what kexts to inject. There is no cross reference to this MOBO and I am not familiar with it. Can someone point me in the right direction? Many thanks.... 
       
  • Download Statistics

    • Files
      848
    • Comments
      2,137
    • Reviews
      2,570

    Latest File
    By Vale1831

    15    0

×