Internal Display Not Working - OS X Mavericks 10.9 - Hackintosh Zone Jump to content
  • 0

Question

Hello,

 

I've managed to successfully install Niresh 10.9.0 on my Sony VAIO VPC-CW29FX laptop, but right after the Apple logo (after loading the Nvidia kexts), my internal screen shuts off, and the graphics drivers switch the display output to the HDMI port. When I go into System PreferencesDisplays and click Detect, it doesn't detect the internal screen. 

 

I've done numerous things to get it to work. I've tried the usual boot switches (GraphicsEnabler=off/on, PCIRootUID=1, etc.), but to no avail. One thing I did try and had moderate success at was the guide Niresh posted specifically for this issue. After backing up the kext files, I was able to boot with the internal display working correctly. The only problem is that qe/ci was disabled. I tried reinstalling the defaul kexts, but as soon as I rebooted, my internal display stopped working again. 

 

My System Specs - 

 

CPU - Intel Core i3 350M

GPU - Nvidia Geforce 310M 256MB

Mobo Chipset - Intel HM 55 Chipset

RAM - 6GB DDR3 PC3-10600

WLAN - Atheros AR9285

Ethernet - Marvell Yukon 88E8057
Audio - Realtek something (not sure right now, at work, but I can look it up later if needed)
 
Is it possible to modify the kext, so it's forced to display out via the internal monitor? If not, is there another way to make it work?

Share this post


Link to post
Share on other sites

4 answers to this question

Recommended Posts

  • 0

 

@justinnickovtime

Boot with nv_disable=1 & GraphicsEnabler=Yes or No

Example with verbosemode

nv_disable=1 GraphicsEnabler=Yes -v

Okay, that seems to have done the same thing as backing up the kexts files. I can boot into Mavericks with the internal display, but qe/ci performance is excruciatingly slow. With the Nvidia kexts ENabled, qe/ci performance is fast, but it only displays out through the hdmi port, i.e. no internal display.

 

Edit: This may be a dumb thought, as I'm limited in my OS X knowledge (I've been working on it for a whole 3 days now), but do the kext files require an edid in the dsdt? If so, I think I found my problem. Every method of edid extraction I've tried so far has failed. So it's very possible that OS X is unable to detect my edid as well.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
    • Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks 
    • I have faced that problem to however does not  help with my current situation. ... I deleted other partitions and created Jhfs+ on the MBR no problems at all Still remains. Can NOT install on MBR natively as suggested ..... I have no reason to make this up    Any suggestions to get this working would be good. 
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×