After Installing Os X 10.8.5 Succesfully On Amd Fx What Do I Do So I Can Use It After Installing? - Hackintosh Mountain Lion - Hackintosh Zone Jump to content
RenderYou

After Installing Os X 10.8.5 Succesfully On Amd Fx What Do I Do So I Can Use It After Installing?

Recommended Posts

Please help asap I need to be able to use it after installing and able to fix the graphics issue that makes it glitchy then I need to be able to use it properly.!!!

 

Share this post


Link to post
Share on other sites

1. Run the terminal http://splights.eu/screencloud/osx10.8.5_2013-12-26_15:10:29.jpg

2. Type in the terminal: sudo cp /mach_kernel /mach_kernel_old

    This make a backup of the current kernel and you can boot your system if this method not working for you.

    Just type in the bootloader if your system will broken after this fix method: mach_kernel_old

3. Download this kernel: http://www.osx86.net/file/3716-1085-amd-kernel/

4. Remove the old kernel and replace with the new:

    In the terminal: sudo rm /mach_kernel

                             sudo cp (drop your downloaded kernel file here on the terminal window) /mach_kernel  (example)

                             sudo chown root:wheel /mach_kernel*

                             sudo chmod 644 /mach_kernel*

5. Rebbot and pray

    Remember: if your system not booting after this, than you must enter this in the bootloader screen: mach_kernel_old npci=0x2000 dart=0

Share this post


Link to post
Share on other sites

Ok. I use Clover to boot on to my windows and os x but i have to keep using clover and i'm fine with that. I just don't know why my screen is all glitchy like if I was using a cracked screen. What i believe is that i have to disable graphics enabler but just don't seem to know where to do that mind helping m. I am a amd user.

8320 fx proccesor

16 gb of pny ram

6870 asus 1gb video card

then running the os on a 1tb harddrive

Sorry for the misspelling using the os x but its glitchy and it does not show all the lettering and images.

https://www.dropbox.com/s/yk1i32y4lqdby3e/2013-12-28%2023.43.16.jpg

for example look at this picture.

Share this post


Link to post
Share on other sites

 

 

1. Run the terminal http://splights.eu/screencloud/osx10.8.5_2013-12-26_15:10:29.jpg

2. Type in the terminal: sudo cp /mach_kernel /mach_kernel_old

    This make a backup of the current kernel and you can boot your system if this method not working for you.

    Just type in the bootloader if your system will broken after this fix method: mach_kernel_old

3. Download this kernel: http://www.osx86.net/file/3716-1085-amd-kernel/

4. Remove the old kernel and replace with the new:

    In the terminal: sudo rm /mach_kernel

                             sudo cp (drop your downloaded kernel file here on the terminal window) /mach_kernel  (example)

                             sudo chown root:wheel /mach_kernel*

                             sudo chmod 644 /mach_kernel*

5. Rebbot and pray

    Remember: if your system not booting after this, than you must enter this in the bootloader screen: mach_kernel_old npci=0x2000 dart=0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting February 2018

    Please donate to support the community.
    We appreciate all donations!



    $48.99 of $120.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • hello all, i wonder if somebody did sucssesfuly installed ati drivers on one of polaris gpu on 10.9 10.10. or 10.11 mac? i find yesterday on some russian forum that they did some bios mods on polaris gpus on siera and high siera but i dont understand process. also no luck for kext emulator on phenom 2 cpu for siera and high siera i got rx560 sapphire 2gb and i tryed install mac but on gpu it said 8mb and graphic is awfull. everithing else works exept spdif output for audio and gpu. i cannot install siera or high siera because of unsupported cpu sse4.1 or sse4.2 my specs are asus m5a97 r2 evo phenom II 955 black edition x4 @3.2 g stock ram 3x4gb ddr3 @ 1333 underclocked because of cpu limitations rx560 sapphire 2gb 60gb adata sp900 2x500 gb wd blue (1x 2.5" , 1x 3.5") all your comments are welcome thanks
    • guys please help me .....................im stucked at apple logo while installing im using hp laptop core i5 7200u 6gb ram amd radeon R5 M430
    • I have working audio, graphics and network on this 10.13  Now store has sent me "security update" which I believe is 10.13.3.  Has anyone done this via store? What do I need to do before I install it? I have issues loading EFI so have to always manually mount it (Clover configurator and EFI mounter both fail) but using terminal and command "open /efi" I am able to mount and make changes to my config.plist too.   
    • Hi guys, I try to install Mac OS X Yosemite on my computer, but... i get stuck at the logo (when i boot it) + i see a bar, who won't charge. Can you give me a solution?   Processor: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (2 CPUs), ~2.0GHz Memory: 2048MB RAM    User DPI Setting: Using System DPI  System DPI Setting: 96 DPI (100 percent) Display Card name: NVIDIA GeForce 210  Manufacturer: NVIDIA Chip type: GeForce 210 DAC type: Integrated RAMDAC  
    • Just to Add I used My windows machine with TransMac to wipe and build the install (including USB). I only used the clover installer I forgot that it could switch to chameleon.
  • Download Statistics

    • Files
      848
    • Comments
      2,137
    • Reviews
      2,570

    Latest File
    By Vale1831

    13    0

×