Did the new Yosemite Zone Distro fix the problem with hp laptops? - Hackintosh Yosemite - Hackintosh Zone Jump to content
alainnoujaim

Did the new Yosemite Zone Distro fix the problem with hp laptops?

Recommended Posts

Did the new Yosemite Zone Distro fix the problem with hp laptops?
Please Help I need to know if i can download the new version.
Last Distro, on hp laptops chameleon wouldn't load and stays stuck at _/ 

and i need chameleon to use the /hp flag. So is it fixed? 

  • Like 1

Share this post


Link to post
Share on other sites

i5 430m hp dv6

amd vision phenom 2 quad core hp dv6

both freeze at spinning "/"

cant even get to the point to type /hp or anything

tried a modded bios on the i5 still freezes at spinning "/" tried to boot clover using 6 just gives me a cpu caller error and freezes

if someone could help id be grateful

Share this post


Link to post
Share on other sites

I had a hard time for a while, followed the guides and made a usb install using TransMac and the Yosemite-Zone 10.10 files and used the boot codes as follows

"Kernel Cache"=/hp -v -x

Used that on an HP Elitebook 8760W.  Still trying to figure out the dsdt things and the .kext files I need, but it boots and works on the ethernet.  Haven't tested too many things yet as I still have a lot of reading to do.

 

Not sure if you got the part about an empty drive.  You have to pick a partition and format it in windows, then in my computer/manage/storage you have to mark the partition as active.  Don't know what else to say, 

 

A better idea of my hardware is :

HP Elitebook 8760W

Computer:      Hewlett-Packard HP EliteBook 8760w (SP247UP#ABA)
CPU:           Intel Core i7-2860QM (Sandy Bridge-MB SV, D2)
               2500 MHz (25.00x100.0) @ 1995 MHz (20.00x99.8)
Motherboard:   Hewlett-Packard 1630
Chipset:       Intel QM67 (Cougar Point) [B2]
Memory:        12288 MBytes @ 665 MHz, 9.0-9-9-24
               - 4096 MB PC10600 DDR3 SDRAM - SK Hynix HMT351S6BFR8C-H9
               - 4096 MB PC12800 DDR3 SDRAM - Samsung M471B5273DH0-CK0
               - 4096 MB PC12800 DDR3 SDRAM - Samsung M471B5273DH0-CK0
Graphics:      AMD FirePro M5950 [HP]
               ATI/AMD Radeon HD 6770M/7670M, 1024 MB GDDR5 SDRAM
Sound:         Intel Cougar Point PCH - High Definition Audio Controller [B2]
Sound:         ATI/AMD Turks/Whistler/Onega/Lombok/Thames - High Definition Audio Controller
Network:       Intel 82579LM (Lewisville) Gigabit Ethernet Controller
Network:       Intel Centrino Advanced-N 6205 AGN 2x2 HMC
OS:            Microsoft Windows 7 Ultimate Build 7600

Share this post


Link to post
Share on other sites

i have tried that but i dont even get to the point on both hp dv6s to be able to type "Kernel Cache"=/hp -v -x goes to boot off usb you see the spinning / then just freezes before getting anywhere i know the usb is ok cuz it boots in my desktop fine

Share this post


Link to post
Share on other sites

i have tried that but i dont even get to the point on both hp dv6s to be able to type "Kernel Cache"=/hp -v -x goes to boot off usb you see the spinning / then just freezes before getting anywhere i know the usb is ok cuz it boots in my desktop fine

 

I suggest

 

BIOS RESET

Rewrite pendrive (two times) the same pendrive

install without type /HP. (again, without)

wait until finished. if Stop 2 mins.

 

start it again.....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting February 2018

    Please donate to support the community.
    We appreciate all donations!



    $62.51 of $120.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Hello! I made my usb key with transmac but when I start OS X Sierra everything goes well, the installation too but the installation blocks at 100%, time remaining: less than a minute. with it worked but not anymore. can you help me? My PC : it is a laptop: ASUS X751LD the motherboard I do not know, the hard drive I do not know but it's a HDD of 500 gb I have two graphics cards: Intel HD 4400 and Nvidia 820m, (which blocked me for the installation of Yosemite and High Sierra) thank you in advance.   PS : Sorry for my bad english i'm french ^^.
    • Hello! Yesterday I successfully installed Yosemite (Yosemite Zone distro) on my laptop (Sony Vaio FIT 15E with an i3-3217U). The only thing that doesn't work is the wifi card (BCM43142). I found in my house another wireless card, AzureWave AW-NB047H. Is this wireless card compatible with macOS?   Sorry for my bad english and thanks in advance. ~IOStream
    • i have installed sierra on my acer aspire e14 e5 - 475G 59C7 with processor i5-7200u 2.5GHZ  nvidia geforce 940MXX 2GB  4GB DDR4  when i install i disabled "move nvidia.pkg" "ati.pkg" "intel.pkg" installed works, but when i type something it gone too far. for example i just type "a" in 0.5 seconds it shows "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" anyone know how to fix this?        
    • Hello,
      On High Sierra 10.13.1 under VMWare.
      I install Final Cut Pro 10.4 when running got this error:
      This graphics configuration does not support hardware acceleration, which is required to run Final Cut Pro.
      My GPU is: AMD Radeon R7 240 but show on Hachintosh About : Graphics: Display 128 MB. Thank you for help.
    • I got same error 4 years later. On High Sierra. What's the solution? What you suggested doesn't work. Why does this happen? Any ideas?
  • Download Statistics

    • Files
      848
    • Comments
      2,137
    • Reviews
      2,570

    Latest File
    By Vale1831

    15    0

×