10.10.1 no amd fx kernal - OS X Yosemite Zone Hackintosh 10.10 - Hackintosh Zone Jump to content
  • 0
worslesr

10.10.1 no amd fx kernal

Question

worslesr    4

The /amdfx kernel option seems to disappeared from the 10.10.1 ISO . Have tried all the other /amd options but they all produce either kernel panics or crash after install.

AMD FX6100 processor, Nokia gtx750 graphics, says m5-88-m motherboard.

What tipn should I use with an fx6100

Share this post


Link to post
Share on other sites

14 answers to this question

Recommended Posts

  • 0

Hi guys,

I can confirm that Yose 10.10.1 installs with /amd, /amd64,  but still have lot of trouble with graphic card issues....

my config is:

Amd fx 8350

Asrock 990fx Extreme 4

Zotac Nvidia GeForce gtx 660 ti

8gb @1333 Corsair

Does anyone solved nvidia issue?

Share this post


Link to post
Share on other sites
  • 0
worslesr    4

I can confirm that none of these options works for me. /amd produces immediate kernel panic. /amd1 runs through main install but then after reboot produces a panic during load.

/amd2 /amd64 has same effect. npci=0x3000 has no effect on any option.

 

My system is FX6100 with Nvidia GTX750 (I always choose the "enable default Nvidia drivers" option).

No option will boot even in safe mode.

Yosemite version 10.10 installed without issue.

Share this post


Link to post
Share on other sites
  • 0
worslesr    4

I have finally got this going by following Niresh's new instructions at  https://www.hackintosh.zone/page/hackintosh/articles/how-to/installing-yosemite-in-unsupported-intel-processors-and-most-amd-processors/

 

Basically this involved installing with /amd1 kernel boot option and at the end of install copying this kernel onto the installed drive.

 

Now works perfectly (Well as perfectly as it did with earlier version. I still cant get Audio to work on my ASUS M5A78L-M motherboard).

Share this post


Link to post
Share on other sites
  • 0

i installed 10.10.1 yesterday on my amdfx 4100 use /amd64 and npci=0x3000 should boot up. mine is working flawless 

 

system:

amd fx 4100

asus M5A78LM_LX

8gb 

ati HD 6xxx 

 

even HDMI video works. 

 

use -v (verbose) to know what and when it crash. post a photo or something, i will try to help. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. CPU: AMD FX 8350 (8-core)
      RAM: 12GB HyperX Fury
      Motherboard: AsRock Fatal1ty 990FX Killer
      GPU: Gigabyte 4GB NVIDIA GTX 960
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×