Kernel Panic: com.apple.driver.AirPortBrcw43224 - OS X Yosemite Zone Hackintosh 10.10 - Hackintosh Zone Jump to content
  • 0
DerpleNerple2000

Kernel Panic: com.apple.driver.AirPortBrcw43224

Question

So as the title says, I get a kernel panic which traced back to that. This started happening after I just wiped the Yosemite drive and reinstalled Yosemite but instead of using chimera, I used Clover. Here are three photos I took before It shut off almost instantly.

 

1: https://i.imgur.com/hYfvfSc.jpg

2. https://i.imgur.com/mwZA42L.jpg

3. https://i.imgur.com/AjGZHWo.jpg

 

Any clue as to why this is happening? I have the proper FakeSMC.kext and the proper Ethernet kext. I do however have wireless/bluetooth MPCIe Combo ii from Asus.

My Specs:

- Asus Maximus VI Formula (Motherboard)

- EVGA GTX 680 2GB SC (GPU)

- Intel i7 4770k @ Stock (CPU)

- G.Skill TridentX 16GB 2400Hz (RAM)

- 1050W Power Supply (PSU)

- 3 HDDs & 1 Disk Drive (Other Stuff)

As noted before: The motherboard came with something called a 'MPCIe Combo ii' which is a MPCI card that has the '2-in-1 Bluetooth+Wireless' in one card, hence the 'Combo' in its name. According to windows, its modelID is 'BCM43B1'. While WiFi is not needed at the moment, it will eventually as I won't be able to tether my laptop's wireless connection over an Ethernet cable forever...

Any help with be greatly appreciated,

DerpleNerple2000

Share this post


Link to post
Share on other sites

2 answers to this question

Recommended Posts

  • 0
Niresh    2,309

container-dmg = file blah blah says that clover is loading OS X Installer instead of Your OS This happens because you have Opened The OS X Installer Application and Installed it 

This wont really work ? so restart and keep pressing 6 it will load chameleon boot from it

only works with Mavericks and Yosemite Zone

Share this post


Link to post
Share on other sites
  • 0

container-dmg = file blah blah says that clover is loading OS X Installer instead of Your OS This happens because you have Opened The OS X Installer Application and Installed it 

This wont really work ? so restart and keep pressing 6 it will load chameleon boot from it

only works with Mavericks and Yosemite Zone

By restart, do you mean to reinstall Yosemite using Chameleon or does Clover come with Chameleon that I can use? I would much rather use Clover as it has all the UEFI features that I can use. I used the Clover guide over at Tonymacx86. The odd thing is when I put in the proper kexts and config.plist, it booted fine from the USB. However, before that, I attempted to boot (from the USB) without the custom config.plist and it gave the exact same issue.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Im trying to install MacOSierra on Alienware 15 r2,  512ssd nvme 951 and 120gb intel sataIII samsung, i6820 hk 980m, intel 530. Ofter many attempts i solved a lot of erros during the installation, and finnaly i found out that macOs does not suport SSD. I created a patch for my ssds but now, i have this error: ACPI ERROR; and last: AppleNVMe Assert failed;  2 SSD: // Inject bogus class-code for NVMe SSD to prevent IONVMeFamily.kext from loading
      DefinitionBlock("", "SSDT", 2, "hack", "NVMe-Pcc", 0)
      {
          External(_SB.PCI0.PEG0, DeviceObj)
          Method(_SB.PCI0.PEG0._DSM, 4)
          {
              If (!Arg2) { Return (Buffer() { 0x03 } ) }
              Return(Package()
              {
                  "class-code", Buffer() { 0xff, 0x08, 0x01, 0x00 },
                  "built-in", Buffer() { 0 },
              })
          }
          External(_SB.PCI0.SAT0, DeviceObj)
          Method(_SB.PCI0.SAT0._DSM, 4)
          {
              If (!Arg2) { Return (Buffer() { 0x03 } ) }
              Return(Package()
              {
                  "class-code", Buffer() { 0xff, 0x08, 0x01, 0x00 },
                  "built-in", Buffer() { 0 },
              })
          }
      }
      //EOF   I did the patch in virtual machine as they instructed. but still nothing.
    • Hey!  I successfully installed macOS Sierra with the Version SierraAMD v3 on my AMD Pc.  But after setting up the PostInstall via Terminal, the OS stops booting at this line : ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 Any solutions?    My System Specs: Mainboard: Asrock 970 Pro3 r2.0 Processor: AMD FX-6300 Graphics: Sapphire Radeon RX460 4GB   Thanks!
    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×