Wireless can not turn on after update 10.10.2 - Hackintosh Yosemite - Hackintosh Zone Jump to content
  • 0
van.vo0

Wireless can not turn on after update 10.10.2

Question

Hi,


- CPU (Mobile DualCore Intel Core i3-2330M, 2182 MHz (22 x 99))

- Graphic Card by exact name (Intel® HD Graphics 3000  (2108 MB))

- MotherBoard Chipset (Intel Cougar Point HM67, Intel Sandy Bridge)

- Wlan (Broadcom BCM4322)

- Ethernet (Realtek RTL8139/810x Fast Ethernet Adapter)

I just update 10.10.2 today, after restart, my wireless not working. Icon showing in menu bar but can not turn on it. Something it's can turn on, but can not scan access point (no access point found if join by manually).

Previous version 10.10.1 working!


Here some log:


 

 

1/29/15 09:46:06.025 com.apple.kextcache[1234]: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleAirPortBrcm4311.kext

1/29/15 09:48:42.000 kernel[0]: Kext com.apple.driver.AirPort.Brcm4331 - library kext com.apple.iokit.IO80211Family not compatible with requested version 400.0.

1/29/15 09:48:42.000 kernel[0]: Can't load kext com.apple.driver.AirPort.Brcm4331 - failed to resolve library dependencies.

1/29/15 09:48:42.000 kernel[0]: Kext com.apple.driver.AirPort.Brcm4331 failed to load (0xdc00800e).

1/29/15 09:48:42.000 kernel[0]: Failed to load kext com.apple.driver.AirPort.Brcm4331 (error 0xdc00800e).

1/29/15 09:48:42.000 kernel[0]: Couldn't alloc class "AirPort_Brcm4331"

1/29/15 09:48:55.692 airportd[36]: _initInterface: Unable to initialize unified temp logger

1/29/15 09:48:55.693 airportd[36]: _createAndRegisterReadStream: CFReadStreamOpen failed for /dev/io8logtemp (No such file or directory).

1/29/15 09:48:55.693 airportd[36]: _initInterface: Unable to initialize unified temporary logger

1/29/15 09:48:55.703 airportd[36]: airportdProcessDLILEvent: en2 attached (down)

1/29/15 09:48:55.000 kernel[0]: AirPort: Link Down on en2. Reason 8 (Disassociated because station leaving).

1/29/15 09:48:55.809 airportd[36]: _handleLinkEvent: WiFi is not powered. Resetting state variables.

1/29/15 09:57:08.000 kernel[0]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable '__ZTV16AirPort_Brcm43xx' is malformed. Make sure your kext has been built against the correct headers.VoodooPS2Trackpad: Identify TouchPad command returned incorrect byte 2 (of 3): 0x00

1/29/15 09:57:08.000 kernel[0]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable '__ZTV25AirPort_Brcm43xxInterface' is malformed. Make sure your kext has been built against the correct headers.

1/29/15 09:57:08.000 kernel[0]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable '__ZTV16AirPort_Brcm43xx' is malformed. Make sure your kext has been built against the correct headers.

1/29/15 09:57:08.000 kernel[0]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable '__ZTV25AirPort_Brcm43xxInterface' is malformed. Make sure your kext has been built against the correct headers.VoodooPS2Mouse Version 1.8.11 loaded...

1/29/15 09:57:08.000 kernel[0]: Can't load kext com.apple.driver.AirPortBrcm43xx - link failed.

1/29/15 09:57:08.000 kernel[0]: Failed to load executable for kext com.apple.driver.AirPortBrcm43xx.

1/29/15 09:57:08.000 kernel[0]: Kext com.apple.driver.AirPortBrcm43xx failed to load (0xdc008016).

1/29/15 09:57:08.000 kernel[0]: Failed to load kext com.apple.driver.AirPortBrcm43xx (error 0xdc008016).

1/29/15 09:57:08.000 kernel[0]: Couldn't alloc class "AirPort_Brcm43xx"

1/29/15 09:57:28.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init name <p2p0> role 1

1/29/15 09:57:28.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init <p2p> role 1

1/29/15 09:57:28.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init name <awdl0> role 4

1/29/15 09:57:28.000 kernel[0]: AirPort_Brcm4360_P2PInterface::attachToBpf name <awdl0> role 4 successful attach to bpf type 147

1/29/15 09:57:28.000 kernel[0]: AirPort_Brcm4360_P2PInterface::init <awdl> role 4

1/29/15 09:57:28.982 airportd[37]: airportdProcessDLILEvent: en2 attached (down)

1/29/15 09:57:29.000 kernel[0]: AirPort: Link Down on en2. Reason 8 (Disassociated because station leaving).

1/29/15 09:57:29.576 airportd[37]: _handleLinkEvent: WiFi is not powered. Resetting state variables.

1/29/15 09:57:36.000 kernel[0]: AirPort: Link Up on awdl0

1/29/15 09:57:36.000 kernel[0]: AirPort: Link Down on awdl0. Reason 1 (Unspecified).

1/29/15 10:04:15.927 com.apple.kextcache[1123]: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleAirPortBrcm43224.kext

1/29/15 10:04:16.321 com.apple.kextcache[1123]: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AirPortBrcm4360.kext

1/29/15 10:04:21.035 com.apple.kextcache[1123]: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleAirPortBrcm4311.kext

1/29/15 10:04:55.697 com.apple.kextcache[1123]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable 'vtable for AirPort_Brcm43xx' is malformed. Make sure your kext has been built against the correct headers.

1/29/15 10:04:55.698 com.apple.kextcache[1123]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable 'vtable for AirPort_Brcm43xxInterface' is malformed. Make sure your kext has been built against the correct headers.

1/29/15 10:04:55.698 com.apple.kextcache[1123]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable 'vtable for AirPort_Brcm43xx' is malformed. Make sure your kext has been built against the correct headers.

1/29/15 10:04:55.698 com.apple.kextcache[1123]: kxld[com.apple.driver.AirPortBrcm43xx]: The vtable 'vtable for AirPort_Brcm43xxInterface' is malformed. Make sure your kext has been built against the correct headers.

1/29/15 10:04:55.701 com.apple.kextcache[1123]: Prelink failed for com.apple.driver.AirPortBrcm43xx; omitting from prelinked kernel.

1/29/15 10:07:50.361 sudo[1195]:    vanvo : TTY=ttys000 ; PWD=/System/Library/Extensions/IO80211Family.kext/Contents/PlugIns ; USER=root ; COMMAND=/usr/local/bin/rm -R AirPortBrcm4360.kext

1/29/15 10:08:46.685 com.apple.kextcache[1211]: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleAirPortBrcm43224.kext

1/29/15 10:08:51.814 com.apple.kextcache[1211]: kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleAirPortBrcm4311.kext

 

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting

    Please donate to support the community.
    We appreciate all donations!



    $54.09 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • hii i am using samsung laptop intel i3   M370   2.40 Ghz  nvidia geforce  M315  graphics when i boot from usb,  firstly show some code and after this show a dialog box . in this box , showing a phone and laptop, one by one. on the top of the screen, showing apple logo and "Language Chooser". i am not able go next step.   plz help me.
    • Hi guys, I installed the Hackintosh Sierra Zone image and most things work except my graphics. It detects as AMD R9 290X when I use FakeID 0x67B01002 on boot, however I only get 7MB of VRAM with no QE. My screen also tears as well. Hope someone can help me - Intel Core i5 2500K - AMD R9 290X 4GB - ASUS P8Z77-V LX
    • Hey guys, I'm looking into dual booting OSX Sierra or High Sierra on my ASUS Zenbook Pro UX501V. I use a lot of mac only software like sketch at uni and it would make my life a lot easier to just be able to boot into it instead of going to campus to use one of their Mac's. I'm currently running windows 10 and would prefer to not have to lose all my files or reinstall windows 10, however if this is unavoidable I would consider it. Specs are Processor    Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz, 2592 Mhz, 4 Core(s), 8 Logical Processor(s)
      GPU    NVIDIA GeForce GTX 960m 4gb DDR5
      RAM    12GB DDR4
      BIOS Version/Date    American Megatrends Inc. N501VW.300, 9/05/2016
      BIOS Mode    UEFI Does anyone know of any guides? Or has done this before? Even a link to point me on my way. Looked into the clover bootloader and I'm under the impression that's the route I'll have to take. Thanks for any help you may have      
    • Hi everyone. Here are my specs MOBO :Gigabyte Z68 XP UD3 (1155) GPU : HD 6870 1gb CPU Intel i7 2600k (1155) 60gb SATA SSD   MOBO is using legacy Bios. This machine has served me well for years. I tripped a circuit breaker a few weeks ago and now it's stuck in a boot loop. I have setup a new bootable USB to reinstall but for some reason the boot loop is happening when I startup from this as well. I can manage to get to the desktop using the safe mode boot flag (-x) but after a few moments, the desktop freezes and the computer reboots. I used the 10.10.1 disc image to create the new USB stick I am not sure if this could be causing the boot problem in the USB. Should I have used the 10.10.0? At first I suspected a hardware issue but I left the computer on for two days at in the bios screen and it stayed on just fine. Hoping someone can give me a hand figuring out which boot flags can get me going again or how I can reinstall the OS. I really need to get past the freeze/reboot cycle I am in. I am almost ready to nuke this thing and install windows
    • i also have this problem if you will finde the solution please inform me right away and thank you
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,538

    Latest File
    By rembrandt63

    321    0

×