See Apple logo but doesn't go further during install - OS X Mountain Lion Zone Hackintosh 10.8.2 - Hackintosh Zone Jump to content
  • 0
skipper2

See Apple logo but doesn't go further during install

Question

skipper2    0

Hello,

 

I am attempting to install 10.8.2. I tried doing it with no flags and I have tried -v and -x and always amd. I get to the Apple logo and nothing happens after that during the install.

 

My system:

 

Home built

Windows 7

AMD Athlon 64 939

Winfast MOBO with Award Phoenix BIOS (CK804) Nvidia NForce 4

GPU: XFX Radeon HD6770

4 GB RAM

 

Any help would be greatly appreciated and if I do get it running I promise a $25 donation for Niresh's huge effforts.

 

Thank you.

 

Mike

 

 

 

 

Share this post


Link to post
Share on other sites

10 answers to this question

Recommended Posts

  • 0
Koranny    20

If those boot Flags Don't work then your pc Might not be compatible ! there's always a chance

Share this post


Link to post
Share on other sites
  • 0
skipper2    0

Koranny,

 

The odd thing is that I was able to get a retail version of OS X to install but it would not load. I can't get this version to even install.

Share this post


Link to post
Share on other sites
  • 0
Koranny    20

Koranny,

 

The odd thing is that I was able to get a retail version of OS X to install but it would not load. I can't get this version to even install.

 

 

What did you use to boot the Retail installation?

Share this post


Link to post
Share on other sites
  • 0
skipper2    0

Koranny,

 

I do not remember what I used when I installed the retail version. I included an image of my bootloader showing OS X. I did that about a year ago before I knew about Niresh. It does not load, but it installed. I can not get Niresh's version to install. It hangs at the Apple logo or if I do -x -v at [ PCI Configuration begin ].

 

I could try to install it on my Alienware system, but I would prefer not to. That system is:

 

Alienware Desktop

Win 7 Ultimate 64 Bit

Intel i7-3820 @ 3.6 GHz

16 GB Ram

 

I would prefer to install it on my older system that I built which is AMD.

 

 

http://www.flickr.com/photos/89084806@N02/11232557023

Share this post


Link to post
Share on other sites
  • 0
didair    9

Skipper, 

 

Have you tried to bootflags  npci=0x3000/0x2000, PCIRootUID=0/1? 

Share this post


Link to post
Share on other sites
  • 0
skipper2    0

Hello didair,

 

Are you saying I should enter it in the format you gave with the / in there. I have not seen that before.

 

So I would enter: amd -x -v npci=0x3000/0x2000 PCIRootUID=0/1

 

No comma but with the /s?

 

Thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hey!  I successfully installed macOS Sierra with the Version SierraAMD v3 on my AMD Pc.  But after setting up the PostInstall via Terminal, the OS stops booting at this line : ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 Any solutions?    My System Specs: Mainboard: Asrock 970 Pro3 r2.0 Processor: AMD FX-6300 Graphics: Sapphire Radeon RX460 4GB   Thanks!
    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
    • Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks 
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×