Working Asus M5 A78L-M USB3 Board - AMD FX8350 CPU - Radion HD 7770 - Yosemite - Hackintosh Zone Jump to content
JollyRogger

Working Asus M5 A78L-M USB3 Board - AMD FX8350 CPU - Radion HD 7770

Recommended Posts

JollyRogger    0

I've installed Yosemite 10.10.1 successfully on my rig :-

 

AMD FX8350 processor

ASUS M5 A78L-M USB 3 Motherboard

8 Gb DDR3 Ram

AMD Radion HD7770 Graphics card

 

You'll need

 

Niresh Yosemite Zone 10.10.1 DMG

TransMac (trial version)

8Gb USB stick

About 45 Mins

 

Optional downloads (you'll need these to get the Ethernet & Audio working)

 

All in one Audio Package

All in one Ethernet package (copy these 2 zip files on to a spare USB stick for later)

 

 

Create the bootable USB using TransMac (follow the Yosemite install guide)

 

I booted from USB using the following boot flags

 

/amd1 npci=0x2000 GraphicsEnabler=No

 

Format your HDD partition to mac os extended (journaled)

 

You can either customise the boot loader at this point and add the above boot flags (recommended) or just install and run the Chameleon Wizard (found in Finder - Applications) after the installation. You must still enter npci=0x2000 GraphiceEnabler=No once it reboots if you don't customize now. 

 

Once installation is complete the system reboots and you can select your location and keyboard but don't try and connect to the internet yet as the ethernet driver is not installed. Create an account and then let the Niresh configuration scripts run.

 

Once all the scripts have configured you should run the Chameleon Wizard now if you didn't customise the boot loader earlier

 

You can now install the Ethernet and sound packages. (just click on the zip file and then the package file)

Once the 2 packages have installed - reboot

 

You should now have ethernet / internet working :D

To get the sound working, open system preferences - sound, and make sure you have line out selected in the "play sound effects through" tab.

 

Thats it. You are good to go.

 

Thanks to Niresh for all his great work.

Enjoy

 

Jolly ;)

Share this post


Link to post
Share on other sites
Clxrk    0

Hey!

Would it work on my rig? I have the same Motherboard (Asus M5A78L-MUSB3) and an AMD Processor (AMD Athlon II X4 640). I know that my graphics is compatible (NVidia GT 630)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. CPU: AMD FX 8350 (8-core)
      RAM: 12GB HyperX Fury
      Motherboard: AsRock Fatal1ty 990FX Killer
      GPU: Gigabyte 4GB NVIDIA GTX 960
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×