Trying to install Yosemite Zone on tablet with Bay Trail - Hackintosh Yosemite - Hackintosh Zone Trying to install Yosemite Zone on tablet with Bay Trail Jump to content
S1m0n3

Trying to install Yosemite Zone on tablet with Bay Trail

Recommended Posts

Hello to all, i'm trying to install a Yosemite Zone on a tablet with a Intel Atom Bay Trail CPU but i'm stuck.

these are the specs of tablet:

 

Processor Model: Intel Bay Trail-T Z3736F

Processor Main Frequency: Quad Core, 64-bit, 2.16GHz
GPU: Intel HD Graphics GEN7
Memory Capacity: 2Gb DDR3L
Tablet Data Capacity: 32GB
Screen Size: 9.7"
Display resolution: 2048X1536

 

I have two main problems, if I don't set the bus speed to 100.000kHz remains stuck on "root uuid is xxxx ..." (but it's speed should be 83.000kHz)

 
setting it to 100.000kHz can pass the "root uuid is xxx" but I get a kernel panic:
 
AppleACPIPlatformExpert :: start failed
 
i've already tried some boot flags without success. Any idea? Thank u so much!
 
PS: It's normal that recognize 16 threads and 8 cores? Oo
 

Share this post


Link to post
Share on other sites

Hey! 

I have a Pentium Baytrail processor, but it has has the same bus speed and also runs 2.16Ghz (2.58Ghz Turbo) - Can't guarantee this will work, but I have this custom kernel from another forum post about my specific computer. With this kernel, everything runs fine, but you need to boot with these boot flags:

-f

PCIRootUID=1

npci=0x3000

it is possible you will need cpus=4 but try without it first

 

FYI, this kernel is only made to work in 10.9 Mavericks, but I've never tested it on Yosemite, so it is possible it might work.

 

Some other pointers:

Depending on your native screen resolution, you will need to use the flag "Graphics Mode"="[yournativeresolution]x32" - Example, "Graphics Mode"="1366x768x32" - type exactly as is, caps and quotes and all.

you will need to use this flag until you enable graphics support for your gen7 graphics.

 

This kernel has worked much better with chameleon bootloader (which you must boot in legacy bios mode to use) than clover (UEFI boot mode) - It's been a while since I tried clover, but think the two issues I had were the speed of the animations and some of the top taskbar icons dissapearing. Feel free to try clover if you prefer that and let me know how it goes.

 

If this kernel works for you, please keep me and the community updated on your progress, as there are many people interested in installing OSX on baytrail tablets and laptops - for me specifically, the thing I absolutely need the most to figure out with my hackintosh is how to enable support for the integrated gen7 intel graphics. I hear hackintosh graphics support is much easier to troubleshoot in clover than in chameleon, but of course you will have to figure out how to get the clover bootloader to work well with your baytrail installation first. 

So basically if you make any progress with making clover work well, please please update, and if you ever make the slightest bit of progress with enabling graphics support either in clover or chameleon, please please PLEASE update!!! Feel free to PM me if you have any questions that may not be relevant to the forum as a whole but are relevant to this issue.

Good Luck!

mach_kernel

 

P.S. What bootloader are you currently using?

Share this post


Link to post
Share on other sites

Sorry to hack the thread.  But I am also looking to do this with a Bay Trail machine.  

 

On 1/9/2016 at 1:52 PM, evan kontsiotis said:

I have a Pentium Baytrail processor, but it has has the same bus speed and also runs 2.16Ghz (2.58Ghz Turbo

 

 

From the speeds you mentioned you have a N2840?  What machine are you using?  How does OSX run on it?

I am going to try to install using the info and file you posted!

 

Thank you

Share this post


Link to post
Share on other sites

I'm running Mavericks on 2014 Dell Inspiron 11 3000 series 2in1, model i3147-3750slv, Intel BayTrail Pentium N3530. With the kernel in my previous reply, Mavericks runs remarkably well, no complaints or issues aside from non-existent graphics support. That's no big deal though considering there are laptops with HD3000 and so on that should be working OBO but still need some sort of patches. I don't expect it to be easy to enable QE/CI for BayTrail as there is not even a framebuffer kext for it like there is for normal i-series graphics.

Like I said though, this only seems to work correctly with chameleon. I can confirm as of now that the issues I mentioned previously regarding clover (double speed animation, certain features missing in bar on top of screen, most particularly the bluetooth icon) - I did also discover that it may not just be an issue with chameleon or clover, as when I upgraded from chameleon 2378 to enoch chameleon, I had the same issue. 2378 is the last version of chameleon before the team began to incorporate stuff for yosemite, so maybe the reason clover had that issue is only because I was using whatever version that clover configurator gave me. My hackintosh progress is a bit slow right now but I'll report back when I test a clover version from before yosemite.

If anybody is interested in the original thread where i got the patched kernel, here's the link:

http://www.insanelymac.com/forum/topic/301132-cannot-reach-installation-on-dell-inspiron-11-3147/

cgsg2017 on that thread is me just fyi.

Happy Hackintoshing!

8 hours ago, moku160 said:

Sorry to hack the thread.  But I am also looking to do this with a Bay Trail machine.  

 

 

 

From the speeds you mentioned you have a N2840?  What machine are you using?  How does OSX run on it?

I am going to try to install using the info and file you posted!

 

Thank you

 

Share this post


Link to post
Share on other sites

Awesome, thanks for the reply.  I will try it on a chromebook, Dell 3120 with Celeron N2840 cpu, this weekend.

 

Thank you again for your information.  I will post if I am successful (in a new thread) 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting May 2018

    Please donate to support the community.
    We appreciate all donations!

    Thanks



    $148.22 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Affter install High Sierra Zone in: Gigabyte H110m / i3 7100 In first reboot working the graphics but no USB drivers / External USB disks i cant mount clover In the secod reboot have problem, the solution -disiablegfxfirmware ane boot whit config, but hace the same problems, dont see the usb drivers and can not mount uefi partition In other reboot see diferentes config, i try diferents, boot with config_uefi without flags, but when run the graphics dont works but i see the usb drivers and external disk and mount the uefi driver. how repair this? boot with config and fix everting or boot with config_uefi and fix graphics?   sorry my inglis is not god
    • Dear Guys,
      Im trying to install mac os x sierra in my dell laptop and ihave followed all the details and reached the installation part. But im getting error saying "An error occurred installing macOS.To use apple diagnostics to check your mac hardware"
      Guys please please help me with it.ithink im almost 90% close to installing mac os. my lap config as follows.the person who help me resolve will be my hero  Motherboard: INTEL i3 370M 2.40GHZ,0KRP5X CPU: DELL N4030 MODEL. Graphics: ATI Mobility Radeopn HD 5430 Motherboard:  
    • i did one but no hdmi or display port sound even if they are detected processor neither no wifi   and install a multiboot ? i triyed clover but didnt work    
    • Hey can some one help me with a problem https://ibb.co/jv8TRT this is my problem I hope you can help me guys
    • Hi
      I followed Nirav's High Sierra installation guide.
      My problem is that I am getting the below error at the install boot screen (osxAptioFix2Drv:Starting overrides for System\Library\CoreServices\boot.efi
      Using reloc block: no hibernate wake: no)


      what I should to do?

      my specs:
      Asus Rampage VI Extreme 
      intel Core i7 7800x
      Samsung 960 EVO SSD 250 
      Gigabyte GEFORCE GTX 1080 TI Gaming OC
      GSkill TridentZ DDR4 8x2 GB
  • Download Statistics

    • Files
      849
    • Comments
      2,144
    • Reviews
      2,627

    Latest File
    By ka209

    122    0

×