Ethernet - OS X Yosemite 10.10 - Hackintosh Zone Jump to content
  • 0
dsalsa

Ethernet

Question

dsalsa    0

I need some assistant here please. I’ve just installed Yosemite on my PC, everything seems to be working fine except my network. Now in my network my Ethernet Adaptor (en) is green connected and active. It has the right IP Address, Subnet Mask and Router which it set up automatically. So it seems to have connected to my router no problem but it doesn’t seem to go passed that. Under Network Diagnostics i’ve got green Ethernet and green Network Settings but my ISP, Internet and Server are red in other words failed. Any one that could tell me how to fix this issue I would appreciate it.

 

 

- CPU  AMD Athlon II X2 240 2.8GHz AM3 Processor

- Graphic Card  nVidia GeForce 9500 GT 1024 MB

- MotherBoard  MSI K9N6PGM2-V2 mATX Motherboard

  Realtek PCIe FE Family Controller

 

 

I realize to help me out you need the most important thing my network card. Can someone please tell me how I can find out what network card I have in either Maverics or Yosemite which is probably the same for both.

 

Thank you.

 

 

Update:  Even though my Ethernet Adaptor (en) is green connected and active, having the right IP Address, Subnet Mask and Router which it set up automatically it is not connected to the router.  I tried connecting to the router by entering the router IP it doesn't connect. So I don't know how it's getting the IP Address, Subnet Mask and Router when it's not even connecting to my router and I don't know why it shows green and says it's connected.

 

I disconected my cable to the router, guess what it says disconnected, so I guess it is connected to the router after all, which explains how it got the IP Address, Subnet Mask and Router. But here is the thing, if it is connected to the router why when I type in the router IP address in the browser it won't connect to the router. I should connect to the router and allow me to log in to it.

 

 

 

I'm still waiting for that reply so that I can start using Yosemite.

 

I tried "All in one network" no change

 

 

I guess no one knows how to resole this issue, what a shame so much for Yosemite

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. My motherboard is an AsRock Killer Fatal1ty 990FX.
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×