Another How to update to 10.10.3 topic - Hackintosh Yosemite - Hackintosh Zone Another How to update to 10.10.3 topic Jump to content
cgiannakidis70

Another How to update to 10.10.3 topic

Recommended Posts

Hi to all

 

I have successfully installed niresh yosemite 10.10.1 to my pc. My specs are:

AMD FX8350

GIGABYTE 990FXA-D3

16 Gb ram Kingston

AMD Radeon HD 5770

SSD 80Gb

Western Digital 500Gb

TP-link TL-WDN48000

The boot flags i used are /amd1 npci=0x3000 cpus=1 -v

First I wonder could I erase the cpus=1 boot flag so the operating system would use all the cores of my cpu?

Second how can i update to 10.10.3 without problems?Is there a tutorial for that procedure?

 

Thank you.

 

 

Share this post


Link to post
Share on other sites

Install this kernel

you don't need to update to 10.10.3 to Install this kernel

Share this post


Link to post
Share on other sites

Thank you for your reply.

 

I installed the kext inside the zip file .I booted with -f flag and then I replaced the kernel to /System/Library/Kernels.

I tried Hacktintosh Updater but it failed to complete the installation and  my system got into boot loop.Any advice?

Thank you in advance.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting May 2018

    Please donate to support the community.
    We appreciate all donations!

    Thanks



    $35.82 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • Hi, 
      I finally decided to install macOS high sierra on my laptop - Lenovo IdeaPad 720S 15IKB.
      It has:   i5-7300HQ, Intel HM175
      12GB DDR4 RAM
      A Samsung 256GB NVMe Drive
      GTX 1050 Ti With Max-Q   The first try did not boot so i had to use some args to get it to boot. The first problem arises due to the fact that all available usb slots are usb 3.1. The installer did not recognise my keyboard and trackpad and i had to install some kexts to get them working. Well, after i intalled the kexts, It was stuck in a boot loop. I was fed up and it was late so i decided to download hackintosh zone from niresh. I would install it later. Well, when i run hackintosh zone it gets stuck at the apple logo after loading. I ran it in verbose mode and it gets stuck in the following   [Date] localhost com.apple.xpc.launchd[1] <Error>: Host-level exception raised: pid = 541, thread = 0xbf1f, exception type = 0xd, codes = { 0 }, states = { 0 }
      busy timeout[0], (240s): 'AppleEFIRuntime'
      busy timeout[1], (240s): 'AppleEFIRuntime'
      busy timeout[2], (240s): 'AppleEFIRuntime'   Then the screen goes blank and it starts over. Any help is appreciated. Thanks!
    • ASUS laptop X550D can run hackintosk ? help me ! please!!!   thanks alot
    • Oh, thank you but in the meantime I thought again and have installed High Sierra instead. It works just fine, put a camera, bluetooth, wifi, all working OK. I only have to solve a little problem when doing restart it freezes but after shutdown it comes up good! I have also Win7 on same mbr disk and I start with the installation usb but I think go over to EasyBCD to make a smoother boot. If your experienced I would appreciate very much any hints for helping me in this direction. 
    • Hello people!😃   I am new to the hackintosh community. I have a old pc at my home running windows 10 pro. Its a Pentium Dual Core 1.6ghz Processor. A 250mb intel HD i-gpu. (No dedicated Graphics card). A 2gb DDR2 ram. 160gb HDD.   Can i install any mac distro on it ?   I don't want to edit videos on it. I just want to start hackintoshing from this, than my laptop & than my friends laptop. Untill i master this art ☺.   Thank you.
    • Hello people! I am new to the hackintosh community. I have a old pc at my home running windows 10. It has a Pentium dual core 1.6ghz processor. A 250mb intel HD igpu. A 2gb ddr2 ram. Can i install any mac distro on it ?   Thank you.  
  • Download Statistics

    • Files
      852
    • Comments
      2,144
    • Reviews
      2,600

    Latest File
    By Niresh

    537    0

×