Imessage-Fix With Clover - Troubleshooting - Hackintosh Zone Jump to content
  • 0
HackintoshMumbai

Imessage-Fix With Clover

Question

Requirements

1:- A working Hackintosh System

2:- An empty USB Flash drive at least 1 GB

3:- Clover Boot Loader 

There are two methods with USB drive & without USB drive

With USB Flash drive

Set up your USB drive

Plug your USB drive into your computer & format you USB Flash drive 

make sure change the setting before format 

Partition         :- 1 Partition

Name            :- Whatever you want

Format          :- MS-DOS-FAT

Partition map :- MBR 

Install CLOVER on USB drive

By simply Double-clicking the CLOVER.pkg file it will start the installation. 

Make sure Choose your USB drive as the destination and use standard

settings while installing CLOVER It take less time to install 

Once you successfully install Open your USB drive in Finder by 

double-clicking the icon of the USB drive on the Mac OS X desktop. 

and navigate EFI->ACPI->patched 

and copy your DSDT.aml file in it 

Next, go back to the EFI folder at the base of your USB drive,

and open the file config.plist

make sure add this In top of </dict> and </dict> 

<key>RtVariables</key>

<dict>

<key>MLB</key>

<string>Serial Number Here</string>

<key>ROM</key>

<data>

Mac Address Here(LAN)

</data>

</dict>

Put serial no of your mac and add more 7 digits 

and add you mac address too 

Once you done Boot your MAC OS from USB drive 

without USB drive

Simply install CLOVER on you mac drive and copy your DSDT.aml to

EFI->ACPI->patched 

and add this to your config.plist which is place in   /Root/EFI/

 

<key>RtVariables</key>

<dict>

<key>MLB</key>

<string>Serial Number Here</string>

<key>ROM</key>

<data>

Mac Address Here(LAN)

</data>

</dict>

and add your serial no with more 7 digits and your MAC address 

Restart to see effect

 

Source

http://hackintoshmumbai.blogspot.com/2013/04/imessage-fix-with-clover.html

post-392-0-59398400-1386351033_thumb.jpg

Edited by HackintoshMumbai
  • Like 1

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hey!  I successfully installed macOS Sierra with the Version SierraAMD v3 on my AMD Pc.  But after setting up the PostInstall via Terminal, the OS stops booting at this line : ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 Any solutions?    My System Specs: Mainboard: Asrock 970 Pro3 r2.0 Processor: AMD FX-6300 Graphics: Sapphire Radeon RX460 4GB   Thanks!
    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
    • Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks 
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×