- 0
ATI RADEON SAPPHIRE HD5450 no signal on boot,MAVERICKS
Asked by
animalea1
-
-
Download Hackintosh
-
-
-
Files
-
-
-
Posts
-
Hey! I successfully installed macOS Sierra with the Version SierraAMD v3 on my AMD Pc. But after setting up the PostInstall via Terminal, the OS stops booting at this line : ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 Any solutions? My System Specs: Mainboard: Asrock 970 Pro3 r2.0 Processor: AMD FX-6300 Graphics: Sapphire Radeon RX460 4GB Thanks! -
Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated. The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed. Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is) -
By oneandrew91 · Posted
980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in nanoseconds: some random numbers. -
By laurentiuronea · Posted
Hello guys!
Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
I need help. Can you help me?
Here I attached a demo with the problem.
https://goo.gl/cp5E8M
Thanks in advance! -
Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks
-
-
Download Statistics
-
Files842
-
Comments2,129
-
Reviews2,532
-
Good evening!
Today I tried to install Mavericks from usb on my intel-based pc,which is a Dell Optiplex 760.Everything was great until installation finished and booting the new installed Mavericks.
When the computer restarts to boot the new Yosemite,the monitor shows NO SIGNAL,GOING INTO SLEEP MODE.
The monitor is connected to my ATI RADEON 5450 with HDMI PORT.
i tried booting with flags, -v -x ,nothing seems to work,please,can anyone help me to get it to work? I need at least to see something on my monitor so i can later make the video card fully to work and modify the respective kexts.
Maybe there is a combination of flags that work...
Thank you very much!
best regards!
Share this post
Link to post
Share on other sites