HP G72 Niresh Install - Hackintosh Mavericks - Hackintosh Zone HP G72 Niresh Install Jump to content
play3d0ut

HP G72 Niresh Install

Recommended Posts

I want to start with im a total n00b when it comes to hackintosh setups, so you may need to go into detail. I knew the risks of atempting an install on a laptop, so now i am trying to get it going. I installed Niresh Maverick and everything went great. It finished install, and as it boots, the progress bar disappears and it transitions to scrambled graphics. I tried -x and graphicsenabler=on and off, no change. I have read a lot of articles regarding kexts for the intel hd graphics on the hp g72, but i dont have a clue what to do with that new found knowledge. Please assume i know nothing, any advice would be greatly appreciated.

Share this post


Link to post
Share on other sites

Hey! Glad to have you as our newest addition to Hackintosh Community. I remember the old days - I was once a noob too! Anyway, the simplest solution to your problem if it is unsupported graphics drivers is:

1: Boot using single user mode - if you are booting with chameleon, you will have to type -s, if booting with clover, you will have to press the space bar when your mac installation is highlighted, and select single user mode. If you need help any of this ask me any specific questions and I should be able to help you.

 

2. The screen will show a whole bunch of crazy text, none of which you most likely understand at this point, but that's fine, you don't need to yet. Eventually, the text will come to an and and you will be able to type. ype the following exactly and press enter at each new line:

mount -uw /

grafix backup all

shutdown -r now

 

your computer will then reboot. Try booting into mac now, see if it works. If it doesn't, please post back with your issue. If it doesn't work, make sure that before you post back here, you boot and type -v in chameleon or boot verbose in clover. Then while it's booting and showing you all he crazy text, try to snap some pictures of what it says, especially the last messages before it reboots or freezes.

 

Also, just fyi, this solution basically moves the accelerated graphics drivers from their default system location, preventing them from loading. Many times in hackintoshing, a freeze or glitch during the boot means problematic graphics acceleration drivers, They will load, but not work properly and freeze the screen due to patches that may be required. So basically, this solution will allow you to use your hackintosh but you will not be able to watch most videos smoothlly, will not be able to run 3D applications or games, and wil cause very minor graphics glitches here and there (if gone as expected). If you've seen posts where your graphics card is supported,You will have to seek help from other users of your same computer in order to enable support. But, until then, try  this solution.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting May 2018

    Please donate to support the community.
    We appreciate all donations!

    Thanks



    $53.73 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Posts

    • I have searched all over and there is a LOT of info on what to do to install Mac OS w/e once you have set up the Mac VM. I am brand new at this so I may just be missing something very simple. How do I get from this... https://imgur.com/vQrLPXH To this.... https://imgur.com/RunPZ1C  
    • Hello everyone,  I'm trying to install High Sierra (with AMD support) on my AMD 4500m Lenovo G505s laptop. When booting from Clover in EFI with i get some really fast screen log then the pc reboots. Now, i know there isn't a way you could help me without some info/logs, unless i'm missing a major malfunction known on these kind of laptops, so, do you know a way i could prevent it from rebooting in order to at least understand what is causing this problem? Do you think even trying to put OSX on this laptop is worth it? Thank you.
    • Hello, i am trying to install High Sierra on my ASUS X75VB but i am getting multiple errors with the ACPI.
      I believe it is CPU related?

      Mainboard: HM76 (X75VB SOCKET 0)
      CPU: Intel Core i5 3320m (Not the original CPU of this laptop!)
      GPU: Intel HD Graphics 4000 & NVIDIA 2GB Geforce 740M
      RAM: DDR3 8GB
      Storage: 120GB SSD (SATA-2)

      I have used the DSDT.aml & SSDT.aml from the following resource:
       https://github.com/xxx10101xxx/ThinkPad-X230-macOS/tree/master/i5-3320M

      My config.plst can be found here:
      https://drive.google.com/open?id=1lK7ixY8fAvtIJv8gY6Gf-RQvKJBVcFLm

      Thanks in advance!
    • im already download 10.12 and 10.13 . when im trying install 10.12 . all works fine , like resolution already 1920x1080 , sound , network all fine .. but when im trying install 10.13. resolution wont 1080 , already install nvidia web drivers , but hopeless..

      using Nvidia GT630 , btw .
    • I have Yosemite Zone working on Virtualbox fine.  After downloading High Sierra Zone there is only a dmg and no ISO.  I tried converting the dmg with hdiutil but it goes to 8GB and I get "no bootable media" in Virtualbox.  Has anyone been able to do this yet? 
  • Download Statistics

    • Files
      849
    • Comments
      2,144
    • Reviews
      2,627

    Latest File
    By ka209

    116    0

×