Dell E6420 - Yosemite - Touchpad kext? - OS X Yosemite Zone Hackintosh 10.10 - Hackintosh Zone Jump to content
  • 0
Sign in to follow this  
hellno

Dell E6420 - Yosemite - Touchpad kext?

Question

hellno    0

Dell E6420 - Yosemite - Trackpad kext?

Hello All,

I've successfully installed Niresh's Yosemite on my Dell E6420; everything works except for the touchpad (mouse) and battery status.

Here's its specs:

 Intel Core i5 2520M Processor 2.5GHz

250 GB HDD

16GB RAM

14-Inch Screen, Intel HD Graphics 3000

 

I'd really appreciate it if you can help me fix this touchpad problem. I can live without knowing the battery status. I've tried installed a couple kexts found on Google but none of the works.

Thank you.

Share this post


Link to post
Share on other sites

2 answers to this question

Recommended Posts

  • 0
breakout89    0
On 2016. április 17. at 0:25 AM, hellno said:

Dell E6420 - Yosemite - Trackpad kext?

Hello All,

I've successfully installed Niresh's Yosemite on my Dell E6420; everything works except for the touchpad (mouse) and battery status.

Here's its specs:

 Intel Core i5 2520M Processor 2.5GHz

250 GB HDD

16GB RAM

14-Inch Screen, Intel HD Graphics 3000

 

I'd really appreciate it if you can help me fix this touchpad problem. I can live without knowing the battery status. I've tried installed a couple kexts found on Google but none of the works.

Thank you.

Hi ,

 

Did you manage the wifi as well ? If so how did you did it ?

 

Please send me the wifi kext file . avsupervisor.pr@gmail.com 

 

Thanks ,

Krisz

Share this post


Link to post
Share on other sites
  • 0
ujubf    1

Please attempt the following steps:

  • Clean the LCD screen.
  • Turn off the computer closely examine the condition of the screen.
  • Take notice of any smudges or areas to be cleaned.
  • Use a microfiber cloth to remove any obvious dust and gently brush off any dirt particles.
  • Proper cleaning kits should be used to clean and keep your LCD displays in a crisp clear pristine condition.
  • Never spray any cleaning solutions directly on to the screen; spray it into the cleaning cloth.
  • Very gently wipe the screen in a circular motion. Do not press hard on the cloth.
  • Do not leave any liquid on the screen. Remove all excess moisture as it may damage your screen.
  • For stains that are hard to remove, repeat this procedure as needed.
  • Let the LCD screen dry thoroughly before you turn it back on.

For more help approach Dell Latitude E6420 Manual.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Download Hackintosh

  • Files

  • Posts

    • Hey!  I successfully installed macOS Sierra with the Version SierraAMD v3 on my AMD Pc.  But after setting up the PostInstall via Terminal, the OS stops booting at this line : ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 Any solutions?    My System Specs: Mainboard: Asrock 970 Pro3 r2.0 Processor: AMD FX-6300 Graphics: Sapphire Radeon RX460 4GB   Thanks!
    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
    • Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks 
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×