Unusual boot:0 error - Hackintosh Yosemite - Hackintosh Zone Jump to content

Question

Unusual boot:0 error

Hey guys,

I recently installed Niresh's Yosemite Zone 10.1.1. I followed this YouTube tutorial as closely as I could:

The problems began when I tried to boot without the usb. All I received at first was the text "boot0ss: error". I dug around online, and eventually "solved" it using chameleon wizard, but now, I get the text "boot:0 error". No other text, unlike some of the cases I've seen online. Niresh's

I have tried my hardest to solve it to no avail. For now, I have un mounted the drive OS X was installed on, formatted the partition, and planning to attempt the process of installation again tomorrow because when it first installed, it said it could not be installed on the machine (but somehow worked anyway). Any suggestions are appreciated - I'm a super-noob at this :P

Thanks in advance :) hope to get this figured out!

PC Specs:

Intel i5 4690k

Samsung 850 Evo 250GB w/ 1 partition for Windows and 1 for Mac

Gigabyte GA Z97MX Gaming 5
16 GB RAM
no graphics card atm 

Boot flags: 
-v -x GraphicsEnabler=Yes PCIRootUID=1 -no-zp 

I have tried:

Dd and Sudo of drive partition; says location doesn't exist.

Reinstallation (both attempts mysteriously resulted in an installation failure, but still allowed me to boot into Mac)

Clearing the mac partition completely and unmounting it - this is what leads me to believe it's a bootloader issue

Using chameleon wizard and changing it to boot0hfs.

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting

    Please donate to support the community.
    We appreciate all donations!



    $80.78 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Hi, everyone, thanks for your time.
      I'm trying to fresh install macOS 10.13.1 (Build 17B48). I'm trying to do this by free myself from multibeast and by put kexts in EFI/CLOVER/kexts/10.3 and set a good config.plist.

      I have this famous issue in verbose mode and can't boot.
      IOConsoleUsers: time(0) 0->0, lin 0, llk 1,
      IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0
        It's looks like your own issue.

      Every time, i can boot the first time. I start my post-install by install the web drivers automatically served by Nvidia. And never be able to boot again…
      I didn't found any plist option that permit to boot over this issue…
      help… !

      My list of kexts and my config.plist is joined.
      Thanks for your time…


      Here are my list of used kexts kexts/10.13 folder : NvidiaGraphicsFixup.kext    v 1.1.3 AppleALC.kext
      AtherosE2200Ethernet.kext    v 1.2.0
      FakePCIID_XHCIMux.kext        v 2.2.1
      FakePCIID.kext            v 1.3.9
      FakeSMC_ACPISensors.kext    v 6.25-333-g05e0f4be.1759
      FakeSMC_CPUSensors.kext        v 6.25-333-g05e0f4be.1759
      FakeSMC_GPUSensors.kext        v 6.25-333-g05e0f4be.1759
      FakeSMC_LPCSensors.kext        v 6.25-333-g05e0f4be.1759
      FakeSMC.kext            v 6.25-333-g05e0f4be.1759
      HDMIAudio.kext            v 1.0
      IntelMausiEthernet.kext        v 2.3.0
      Lilu.kext            v 1.2.0
      Shiki.kext            v 2.0.5
      USBInjectAll.kext        0.6.2 Driver64UEFI folder apfs.efi
      AppleImageCodec-64.efi
      AppleKeyAggregator-64.efi
      AppleUITheme-64.efi
      DataHubDxe-64.efi
      EmuVariableUefi-64.efi
      FirmwareVolume-64.efi
      FSInject-64.efi
      HFSPlus.efi
      NTFS.efi
      OsxAptioFix2Drv-64.efi
      OsxFatBinaryDrv-64.efi
      SMCHelper-64.efi
      VBoxHfs-64.efi

      Gigabyte GA-Z170X-Gaming 5 | i7-6700(not K) | GTX980ti - OS on SSD.
    • Hi everyone, i got acer Aspire Icore 3 Laptop, and i've trie many installs, however, none of those worked on this laptop, even typing -x -v, never get the install menu, some of the run until the screen flash and reboot's again and again,, Anyone can give me a tip, i would try Yosemite, cause i got MacBook 5.1 can't upgrade to sierra/High Sierra ( well i can with a patch, but can't get the sierra installer ) i've put all the laptop specs on the screenshot.  i think all is components are compatible with mac,, above. Thanks in advance.file:///Users/Memphis/Downloads/Acer specs.png  
    • i am trying to install yosemite on a asus m2n sli deluxe chipset NVIDIA amd Athlon 64 X2 5600+ ATI Radeon HD 4800   and still i am stuck at pci configuration begin or console error. i tried several kernels and graphic cards with no results   i found some kext (no pci ea) now i come to the screen with language. and then it freezes   I’ve tried several thing but i am stuck is there anyone that can help
    • I've created install media with MacPawn as well as with Unibeast from High Sierra AppStore DMG ; The USB disk creation went smoothly, but when I try to boot from these disks all I get is a blinking cursor on top left of the screen, nothing else ... My Mac / Hackintosh : Asus P5Q Intel Core 2 Quad CPU Q8300 @ 2.50 GHz 8,00 GB RAM AMD Radeon HD 6450 Legacy IDE / ATA : 200 GB SATA : 320GB SSD : Kingston 120GB
    • Please install Niresh Yosemite now, at the first boot after installation i have full resolution with the intel hd 3000. after repairing permissions etc etc, i do not have any more acceleration at the new reboot. Sometimes by booting pennete I have acceleration graphic, starting from hard disk n. Ah, I got the Chameleon bootloader
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,539

    Latest File
    By rembrandt63

    418    0

×