Yosemite 10.10.1 Audio Issue - Sound Kexts - Hackintosh Zone Jump to content

Recommended Posts

Yosemite 10.10.1 Audio Issue

Hi all.

   I have recently managed, for the very first time, to get my Yosemite 10.10.1 Hackintosh working a couple days ago, ever since, however, I seem quite unable to sort out all of the Audio codec is Realtek ® ALC887, so off I went, testing every single corresponding piece of kernel extension to this codec, but the problem, of course, persisted.

    Later on I was tweaking my Bios and found out that my Mobo had some "Auto Turbo" mode enabled, slightly overlocking my CPU, I have disabled it (never been an overclock kind of guy) and then I realised that the Audio problem got even worse; Which lead me to a deeper research: BUS Speed and Busratio. I have seen some threads where people successfully got rid of this same problem by adjusting Busratio and stuff, I use Chameleon Bootloader, so try setting it through Chameleon Wizard would be ok, but as frustrated as almost every AMD user might be, I'm helplessly asking myself now: "Where the heck can I get some info on my CPU`s BUS frequency/External Clock?" all the information out there is for Intel.

Anyway, I have come to a point where my research is stirring me nowhere, so I came to ask for some help, any attempt would be dearly appreciated.

 

My Specs are:

 

AMD A8 6600k 3.9GHZ

Gigabyte GA-F2A55M-S1 with Realtek ® ALC887

8GB G.Skill Sniper 

Zotac Nvidia Geforce GTX 650 DDR5 1GB 

Corsair CX750 Power Supply

160GB SATA HDD running Niresh's Yosemite 10.10.1 with Chameleon Bootloader

 

Notes: I'm trying to get this sound fixed with onboard Audio are not synchronised.

 

Thanks in advance.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hi guys, managed to make a hackintosh and everything is going great (Wifi, cpu ECT)   But it's pretty damn slow, i tried one of my favorite lightweight games to test (The Ultimate Doom) and it could barely run THAT! This is my first time and i have no idea how to get my 8570 to work.. Probably should have read a bit, eh? Lol.   And no I don't plan on using my hackintosh for gaming, but god so slow..   Thanks, help would be very appreciated. Edit: It's the dedicated version btw, and in about my mac I see "Graphics Display 3 MB" maybe the issue?  
    • Trying to boot to the installer but I get instant reboot after the following: I am using the following flag (I tried a variation - I need USBBusFix=Yes otherwise it fails even earlier): All my USB devices turn off just before it reboots, so I'm guessing it loses connection to the USB install media - but I can't work out why it's disabling all the USB's. My motherboard is an AsRock Killer Fatal1ty 990FX.
    • Saludos!   Tengo el mismo error (RAM a 667mhz), con una placa base ASUS (y mi cpu es el fx 6300).   Lograste solucionarlo?
    • Hi guys. Well, this is my second day of troubles, I touched everything, I installed max like 5 times in the same day, trying to figure out things and well. My Mac it display my graphic card on the #About this Mac tab With 2047MB ( So I guess all is right ) I installed the latest nvida drivers and on clover I activated the NvidaWeb. The problem is the resolution. Max resolution allowed is 1280 x 1024 and 800 x 600. I used to boot with nvd_drv 1 with nvd dry 0, I used to boot with all that things, and without them.  BUT No way to fix the resolution. Someone knows what-s going wrong and how can I fix it? Bdw im using iMac14,2 and OS X Sierra 10.12.3 Im connecting to the screen with DVI adapter. ( Maybe that causes the problem ) But it shows Im running 2047 MB so... idk why I can't change resolution. Thanks! ================================= SOLVED EDIT: Hi guys, in Display Resolution, I just set it in "Default for display" and after that pressing "THE WINDOWS BUTTON KEY, IN MY CASE, IDK WHAT KEY IS THAT IN MAC KEYBOARD, I THINK THE CONTROL ONE OR IDK" PRESSING that key I selected Scaled, and it appears more options and resolutions. There is a video on youtube about that called "Mac OS X Display Resolution" If someone has the same trouble.
    • Hello , i have a big problem , help me please, i have installed properly Mac OS Sierra , but now i can’t boot Windows 10, when i click on a image , which has written for example boot Windows from legacy hd3 , it blocks on an image with the Apple sign on an hard disk image, and when i enter the bios i can’t see tue hard disk in boot options, how can i add Images? Pleaseeeee
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,534

×