sys settings from Mac: 3.1 to 6.1 causing boot failure - OS X EL Capitan 10.11 - Hackintosh Zone Jump to content
  • 0
arupajhana

sys settings from Mac: 3.1 to 6.1 causing boot failure

Question

arupajhana    0

sys settings from Mac: 3.1 to 6.1 causing boot failure

Hi All:

On my Hackintosh, trying to fix persistent Audio problems, I changed the sys setting from Mac: 3.1 to Mac: 6.1, and on booting I can now access the Splash Screen functions (see below), but can't get it to successfully boot to OSX (it keeps returning me to the splash screen, or it needs rebooting to get there). I've tried safe mode boot, and verbose boot (which runs a mesh of endless code, which I aborted and rebooted).

In one series of attempts it brings up the Apple logo in the boot-up screen, but it keeps falling back to the Gigabyte Splash Screen without completion. Clover Version 2.3k rev. 3577, EFI Revision 2.31 on OSX 10.10.10 ... but the modification from 3.1 to 6.1 was done via Clove Configurator.

Any tips are much appreciated! :)

Cheers, 

Motherboard: Gigabyte UltraDurable Z97-HD3 (LGA 1150)
Audio: 2/4/5/1/7.1 channel; Support for S/PDIF Out
Graphics: NVIDA Geforce GTX 970 PCI-E 3.0/4GB GDDR 5/256 bit (Flex Display: 4 monitors: HDMI/Display Port 3)
Power Supply: Hydro G 650 W (Zero Noise: 0dB; full modular; for Intel Skylake)
Corsair Dual H60 Fans (Hydro Series; High-Performance Liquid CPU Cooler)
Memory: Corsair 4X8GB=32 GB DDR 3 Pro Series 1600MHZ
Corsair Graphite Series 780T Full-Tower PC Case
Asus 16X Blu-Ray Writer (M-Disk Support)
TP-Link 450 Mbps Wireless N Dual Band PCI Express Adapter (for 5GHz band or legacy 2.4GHz)
Samsung SSD 850 EVO 120 GB (3D V-Nand Technology)
Samsung 3TB Drive
Intel Skylake Core i7-4790K (Cores: 4, Threads: 8)
LG Ultra HD 4K Monitor 27UD68 cm/27
Magic Keyboard (MLA22ID/A
Magic Trackpad 2

Mac OSX 10.10.10

Mac Book Pro, 13 inch (mid 2010)
Memory: 8GB Ram @1067 MHz DDR3
Graphics: NVIDIA GeForce 320M 256MB
HD: Samsung 1TB
Mac OSX 10.10.5


Sennheiser HD201

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Download Hackintosh

  • Files

  • Posts

    • Hey!  I successfully installed macOS Sierra with the Version SierraAMD v3 on my AMD Pc.  But after setting up the PostInstall via Terminal, the OS stops booting at this line : ioconsoleusers: gioscreenlockstate 3, hs 0, bs 0, now 0, sm 0x0 Any solutions?    My System Specs: Mainboard: Asrock 970 Pro3 r2.0 Processor: AMD FX-6300 Graphics: Sapphire Radeon RX460 4GB   Thanks!
    • Ok, so I built a new hackintosh with Niresh Mavericks 10.9.0 on a modified Dell Precision T7400 and mostly everything seems to be working correctly except for two things: Sound (The obvious one), and Online video content (Youtube, Facebook videos, etc) play at lower than 1 fps, frozen speed, after 10 seconds of playback it reaches 4 seconds of elapsed time and I have found no other forums explaining this or talking about this so I decided to bring it up here. As for the sound situation, I already bought a new card to replace the X-FI, so yes, I am aware of the Sound Blaster Audigy X-FI Xtreme Audio not being supported, but what caught my attention is that the sound was working and video playback problem was gone temporarily, I happened to hear the sound from my headphones sitting on my desk and put them on, and sound. I decided to test a video on youtube, the problem with the videos, gone. But after a reboot, they were back. However I have the logs from today and can give them to whoever wants/needs them to figure out what may have caused the sound to kick in on the X-FI and maybe add support for this sound card. I copied as far back in the time that the system was on while sound was working that I could up to the shutdown event. I know it's pretty large but I am not sure where to look, I am simply handing this out to whoever wants to see what may have given me audio on this card for the session. From what I can see that looked to be the most closely related to my issue is something to do with bluetooth (I don't have bluetooth, btw), it says in console: "9/20/17 6:49:55.785 PM com.apple.audio.DriverHelper[200]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod." repeatedly many times. This could be completely unrelated.   The only recent actions I made that I personally can think of that may have triggered this would be: I installed several different versions of a music player through Winebottler and it failed to start, more and likely because of the lack of .net framework 2.0 and 4.0, this is my highest suspicion of being the likeliest cause, but I could be wrong. I installed Crossover and installed the music player in it, which it ran in and is where I discovered that you need .net 2.0 and 4.0 (It had the player in it's database and installed .net automatically) Ran Discord (It uses output/input, so may as well add that in) The player was MusicBee, and when it crashed, it also left a log that I could probably try to reproduce if needed.   Specs: Dell Precision T7400, 1x Intel Xeon x5482 Nvidia Geforce GTX 660 16GB ddr2 ram 667mhz (Tested to be working correctly, please don't ask me to run a mem test I am impatient enough as it is)
    • 980m+intel 530, 6820hk 512ssd+120ssd+1TB im trying to install macOsierra, and i tried a lot of combinations of arguments and configuration, nothing seems to work, i got the same problem every time ofter i start the installation! Is saying: System uptime in  nanoseconds: some random numbers.
    • Hello guys!


      Today I tried to install macOS High Sierra from a bootable usb, but my pc froze during the booting process.
      I need help. Can you help me?

      Here I attached a demo with the problem.
      https://goo.gl/cp5E8M


      Thanks in advance!
    • Hi, I am new at this, I installed maverick on a Lenovo g460 and everything ok but when I try to start appear a screen and say "system uptime in nanoseconds..." , I use -x and -x and others but I can't solve my problem. Sorry for my English. Thanks 
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,532

×