i am using samsung laptop
intel i3 M370 2.40 Ghz
nvidia geforce M315 graphics
when i boot from usb, firstly show some code and after this show a dialog box .
in this box , showing a phone and laptop, one by one.
on the top of the screen, showing apple logo and "Language Chooser".
i am not able go next step.
plz help me.
I installed the Hackintosh Sierra Zone image and most things work except my graphics. It detects as AMD R9 290X when I use FakeID 0x67B01002 on boot, however I only get 7MB of VRAM with no QE. My screen also tears as well.
Hope someone can help me
- Intel Core i5 2500K
- AMD R9 290X 4GB
- ASUS P8Z77-V LX
I'm looking into dual booting OSX Sierra or High Sierra on my ASUS Zenbook Pro UX501V. I use a lot of mac only software like sketch at uni and it would make my life a lot easier to just be able to boot into it instead of going to campus to use one of their Mac's.
I'm currently running windows 10 and would prefer to not have to lose all my files or reinstall windows 10, however if this is unavoidable I would consider it.
Processor Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz, 2592 Mhz, 4 Core(s), 8 Logical Processor(s)
GPU NVIDIA GeForce GTX 960m 4gb DDR5
RAM 12GB DDR4
BIOS Version/Date American Megatrends Inc. N501VW.300, 9/05/2016
BIOS Mode UEFI
Does anyone know of any guides? Or has done this before? Even a link to point me on my way. Looked into the clover bootloader and I'm under the impression that's the route I'll have to take.
Thanks for any help you may have
Hi everyone. Here are my specs
MOBO :Gigabyte Z68 XP UD3 (1155)
GPU : HD 6870 1gb
CPU Intel i7 2600k (1155)
60gb SATA SSD
MOBO is using legacy Bios.
This machine has served me well for years. I tripped a circuit breaker a few weeks ago and now it's stuck in a boot loop. I have setup a new bootable USB to reinstall but for some reason the boot loop is happening when I startup from this as well. I can manage to get to the desktop using the safe mode boot flag (-x) but after a few moments, the desktop freezes and the computer reboots. I used the 10.10.1 disc image to create the new USB stick I am not sure if this could be causing the boot problem in the USB. Should I have used the 10.10.0?
At first I suspected a hardware issue but I left the computer on for two days at in the bios screen and it stayed on just fine. Hoping someone can give me a hand figuring out which boot flags can get me going again or how I can reinstall the OS. I really need to get past the freeze/reboot cycle I am in. I am almost ready to nuke this thing and install windows