Could not boot after installation - Hackintosh Sierra - Hackintosh Zone Jump to content
  • 0
Sign in to follow this  
ran000

Could not boot after installation

Question

Could not boot after installation

Some experiment with different setting during installation and boot flags give me no success.

Here is my equipment:

[root@notebook ~]# cat /run/media/ran/9C26-8D73/lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0)
00:1c.2 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 3 (rev d0)
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1
00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family H97 Controller
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode]
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)

 

Graphical image I take after installation and booting with default setting.

http://pasteboard.co/Hl52JihOU.jpg

Please, any help

Alexandre

Share this post


Link to post
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Backup all your Graphics Kexts,

Select Backup Graphics Extensions in Sierra Installer Customize Menu

or After installing boot with -s and run the following commands one by one

mount -uw /
grafix backup all
kextcache -i /
reboot

Then try booting again

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Donation Goals

    Hosting December 2017

    Please donate to support the community.
    We appreciate all donations!



    $32.14 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Hi! I trying for install Hackintosh Sierra Zone to my MSI GP62-6QE laptop. I made an bootable usb with Transmac using .dmg file. Booted with default kernel flags + cpus=1. I selecting my install disk and next, 2 seconds later i giving this error. My system: MSI GP62-6QE i7-6700HQ GTX950m+Intel HD 530 (1920x1080) 8GB RAM MS-16J5 board.
    • I have Niresh Sierra installer on USB hp224w 16GB, I used MacPwn-Sierra-Dev.app to create this. Niresh Mountain Lion 10.8.5 already installed on my Acer Aspire 4738Z and I want to update to Sierra. Boot to USB, Apple logo with black background and progress bar show. But when installer load and progress bar start to fill, my Laptop quickly reboot and show something like image below. I don't have idea what problem cause this.
    • hey so ive got an HP dv7, 64-bit, with an AMD A6-3400M Radeon and 8gb ram and I've installed mac os yosemite onto VMware Player 12. Everything went well but the mouse is offset. The distance varies on where the mouse pointer is, like if the mouse is in the middle of the screen then the mouse is off a little bit but anywhere left or right of the screen its pretty far off of where the pointer actually is. I've looked everywhere and I've seen people say to type this: editpreferencesinput "optimize mouse for games" = always, but no one is saying where. Plus i think this command would be for VMware Workstation. I had installed VMware Tools onto yosemite but that didn't do anything. I have also installed a beamoff tool so that the os isn't so slow. And i have unchecked the "override high dpi scaling behavior" box and that did nothing. I'd really appreciate the help, i have been stuck on this issue for days. Thanks
    • I'm also stuck on it. I'd been "there" before. But he had solved by doing several random tests.I had used a Shanee's sierra_v4.dmg. Today, not even one solution dmg gives me a positive result. I always have a perfect boot, but it stuck me there in the list of languages. I have this same problem in the Sierra and High Sierra. I think it has some connection with the way they create the installer. When I accompanied them to create the image I noticed that they did not use the official installer of the High Sierra. They use the same (faulty) installer they created for the Sierra. I know the Shanee V4 version worked then and I had used SierraZone just to boot and use the Shanee image. https://forum.amd-osx.com/viewtopic.php?f=52&t=3352&p=34163#p34163
    • Hello Niresh. i have been having trouble installing os x on AMD e2 7110 APU i was wondering if you could help on compatability status to see if i can install any of the os x isos in your site so please help.   Please do not delete this. I understand if you do. From:Fazewolfalpha
  • Download Statistics

    • Files
      842
    • Comments
      2,129
    • Reviews
      2,543

    Latest File
    By rembrandt63

    751    0

×