Having Issues Installing Sierra Zone - Hackintosh Sierra - Hackintosh Zone Jump to content
  • 0
Sign in to follow this  
Gengar60

Having Issues Installing Sierra Zone

Question

Gengar60    0
Having Issues Installing Sierra Zone

Hello everyone,
I am having an issue with the installation of Sierra zone on this laptop setup:

Lenovo Ideapad 510-15ISK 80SR0087MH with specifications,
Processor: i7-6500U (2.5Ghz, no overclock) with iGPU Intel HD 520
Video Card: Nvidia 940MX
RAM: 2x4GB Ramaxel RMSA3230KE68H9F-2133MHz (Stock RAM, not upgraded)
Wireless Adapter: Lenovo Flex 3-1580 AC 00JT477 (Stock, also not exchanged and runs on Atheros QCA9377 drivers)
Ethernet: Not sure of exact port in use, runs on Realtek PCIe GBE Family Controller
HDD: 1TB WD Drive, partitioned 300GB for Sierra.1z381h2.jpg

The error I receive is at the last part of the Niresh installation. It has already finished the main part of the installation and when it starts to clean files up, I get the error that is shown in the attached image. The rest of the installation works fine. The bootflags I have set to boot are only verbose mode. Any help would be greatly appreciated.

Share this post


Link to post
Share on other sites

1 answer to this question

Recommended Posts

  • 0
On 4/13/2017 at 11:25 PM, Gengar60 said:

Having Issues Installing Sierra Zone

Hello everyone,
I am having an issue with the installation of Sierra zone on this laptop setup:

Lenovo Ideapad 510-15ISK 80SR0087MH with specifications,
Processor: i7-6500U (2.5Ghz, no overclock) with iGPU Intel HD 520
Video Card: Nvidia 940MX
RAM: 2x4GB Ramaxel RMSA3230KE68H9F-2133MHz (Stock RAM, not upgraded)
Wireless Adapter: Lenovo Flex 3-1580 AC 00JT477 (Stock, also not exchanged and runs on Atheros QCA9377 drivers)
Ethernet: Not sure of exact port in use, runs on Realtek PCIe GBE Family Controller
HDD: 1TB WD Drive, partitioned 300GB for Sierra.1z381h2.jpg

The error I receive is at the last part of the Niresh installation. It has already finished the main part of the installation and when it starts to clean files up, I get the error that is shown in the attached image. The rest of the installation works fine. The bootflags I have set to boot are only verbose mode. Any help would be greatly appreciated.

i am also having the exact same issue in my sierra installation

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Donation Goals

    Hosting

    Please donate to support the community.
    We appreciate all donations!



    $40.21 of $100.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • hi   ok I have been struggling with this for the past 2 weeks. I have installed and uninstalled Sierra more times than I can count and its been driving me potty .... have only cracked it today.  what you need to do is download create a vanilla usb stick with Sierra.  in order to do this I downloaded Yosemite.zone from the distroes  and created a usb stick.  the installed Yosemite once I was in Yosemite  ( the gfx work in this disto) I downloaded a copy of Sierra from the store..  you will have to search the net for the direct link.. I then created a bootable Sierra usb stick using unit beast, I selected legacy boot loader with no gfx injected. I then installed Sierra from this. once Sierra is installed boot from the usb and select your installed Sierra. iff all goes well you should have a working Sierra install with the gfx acceleration working.  I think the problem is with the type of Mac that Sierra thinks it is with everything working my system info is showing a iMac 27" 14.2 .  I have tried installing a boot loader on the main drive with no success so as a workaround you will have to use your usb stick. pics below of my system info  I hope this helped.  https://photos.app.goo.gl/PToVZOxq0UN9c5BR2 I also just noticed whilst I was trying to get thing working I copied a modified andradeonx4000.kext into the root drive of the Sierra stick. I don't know if this has had any effect on the install might be worth doing the same thing andy
    • Hello, I installed macOS High Sierra 10.13 on my Windows laptop. I installed them so I could dual boot them. It took me 2 day's to perfectionize the macOS because of the .kext files. All the Kext files went good except for graphic and Synaptics. If I install Synaptics, I can move the mouse but it zooms in and it gets stuck back into the corners. So I only installed Generic Touch Pad driver and that works fine. 

      Anyhow I thought everything was perfect until I opened Safari yesterday which came with glitches it stutters when scrolling. It's something like this https://www.youtube.com/results?search_query=graphic+glitches+hackintosh only worse. I searched a lot but I found nothing on AMD drivers for my laptop. I really like this macOS, and I want it to be perfect. Is that possible? Maybe with another macOS type/version? O'yeah, when I log in, the vertical lines appear as in the youtube video is that normal or is that because I don't have an graphic driver installed? I really hope on some positive answers, and I thank everyone for his time to read and react on this. Thank you
    • Hello.I am trying to install os x yosemite in my hp laptop but i cant get into the installer of os x yosemite. I already tried with this boot flags: /hp /hp 1 /haswell -v -x And the result is same, i stuck in a gray screen with the logo of apple. The specs of my hp laptop are: Intel(R) Celeron(R) CPU N3060 1,60 GHz up to 2,48 GHz (2 cores) 4GB RAM DDR3 Intel HD Graphics 500GB HDD (approximately) Does anyone know how to fix it? Thanks PD:sorry for my bad english, i talk spanish
    • Hello, I got macOS Sierra to work on my vostro 230 and I need to find drivers. I mostly just need graphics drivers (just integrated G41 graphics) and Broadcom Network drivers. > PLEASE DON'T GIVE ME AN EXPLANATION JUST GIVE ME DRIVERS. < CPU: Intel Core 2 Duo E7500 2.93 GHZ GPU: I could switch between a EVGA 610 or Intel G41 graphics. RAM: 4 GB DDR3 1333 MHZ. PSU: I don't know if this makes a difference but I got this Vostro when the PSU failed and I put a Optiplex 360 PSU in it.  
    • Hello,
      i successfully installed macOS Sierra version 10.12.3 on my laptop lenovo z500:
      intel core i5, 8 gb ram, 128 kingston ssd.
      but my problem no driver works except camera and usb.
      sound , wifi , eathernet and display drivers not working and i can't drive. please help, this my first time to install hackintosh and i can't do any thing
      thanks in advance.
  • Download Statistics

    • Files
      841
    • Comments
      2,129
    • Reviews
      2,532

×

Important Information

By using this site, you agree to our Terms of Use.