USB not working after update - Hackintosh Sierra - Hackintosh Zone Jump to content
coss

USB not working after update

Recommended Posts

USB not working after update

Hi,

First of all I want to thank you guys for the great work. Secondly ... I am a completely new (not to say noob) into hackintosh.

I have a strange problem on my z600 HP workstation.

I used Serra zone and all went smooth. Managed to make it work except for my video card. I own a nvidia 1060. Apparently I can't make the drivers work because I get macOS Sierra 10.12.3 installed with this method. I upgraded to macOS Sierra 10.12.4 using apple store update like a native mac would do but I get one problem. USB ports( I only have usb 2.0 on this workstation) stop to work. I messed with the Clover configurations(in the boot menu) and changed things around till a point where I made it work after the update. I then installed the video card but it requires restart ... and guess what ... I have no idea what settings I used to make it work:P

As I said earlier I am new to this and I don;t really know a lot of things about hackintosh or clover:) I guess the update is replacing some Kexts for the usd ... so my question is ... is there a way to install macOS Sierra 10.12.4 instead of macOS Sierra 10.12.3 ? Or anyone has any tips for me on how to best update to macOS Sierra 10.12.4 so I don;t get kexts replaced?

Thank you,

Coss

Share this post


Link to post
Share on other sites

Hey when i tryed to update to 12.4 (nvidia 1060 founders 6gb) i got allot of sandbox errors, could you elaborate wich customize options you changed and what you did after updating? did you put kexts in extra clover folder or in s/l/e also what kernel changes did you aply? i cant seem to rebuild te prelinked kernel because of probally my incompatible kernel
i have an amda a8 8650 apu and i used the amd kernel on http://wiki.osx86project.org/wiki/index.php/Patched_Kernels for 10.12.4

Sorry for being unable to help with clover ATM i am not home so i dont know all the options, i reccomend you write down what you try..

 

Good Luck Fellow pascall user B)

 

Edit: my specs
Main build:
Mainboard: Asus A88X pro FM2+ socket
Nvidia Geforce 1060 GTX 6GB Founders Edition
amd a8 8650 APU 3300mhz (3800 turbo) 
12 GB RAM (2X 4GB MUSHKIN 1333mhz) (2X 2GB CRUCIAL 1867mhz)
Samsung ssd 120gb
Toshiba 1tb hdd
WD 250GB (pretty old)
bios version 2603 x64

Share this post


Link to post
Share on other sites
3 hours ago, Marlon420bud said:

Hey when i tryed to update to 12.4 (nvidia 1060 founders 6gb) i got allot of sandbox errors, could you elaborate wich customize options you changed and what you did after updating? did you put kexts in extra clover folder or in s/l/e also what kernel changes did you aply? i cant seem to rebuild te prelinked kernel because of probally my incompatible kernel
i have an amda a8 8650 apu and i used the amd kernel on http://wiki.osx86project.org/wiki/index.php/Patched_Kernels for 10.12.4

Sorry for being unable to help with clover ATM i am not home so i dont know all the options, i reccomend you write down what you try..

 

Good Luck Fellow pascall user B)

 

Edit: my specs
Main build:
Mainboard: Asus A88X pro FM2+ socket
Nvidia Geforce 1060 GTX 6GB Founders Edition
amd a8 8650 APU 3300mhz (3800 turbo) 
12 GB RAM (2X 4GB MUSHKIN 1333mhz) (2X 2GB CRUCIAL 1867mhz)
Samsung ssd 120gb
Toshiba 1tb hdd
WD 250GB (pretty old)
bios version 2603 x64

Hi,

I did nothing, just updated from the apple store like any native macOS users would. I only have this USB problem now ...

Quick update. I reinstalled the macOS 10.12.3 and then updated to 10.12.4 using the appstore. I now use old keyboard and mouse that connect via PS2 or something and could do all rest of stuff, like install nvidia drivers and my nvidia 1050 works well. 

I only have this one problem with the usb ports. They are not seen in System Information either. When I click on USB there I get : No information found.

I believe this might be a clover configuration problem ... Please note that usb ports were working just fine on Sierra 10.12.3.

Any tips would be very appreciated ... 

Txs,

Coss

Share this post


Link to post
Share on other sites

What you can try is enabling echiacquire (sorry cant remember it 100%) and enabling it in your bios configuration, although i think it should do this automaticly when installing.
This could fix it if not you could try looking into usbinjectall for sierra in google wich should also work. 

BTW: I suppose you got an intel cpu? Guess i cannot get the kernel to work properly.. i have amd so...

Share this post


Link to post
Share on other sites

Just a quick update:

I managed to solve it. Found the right clover settings on a different forum and everything is working well now. Have a few things to still solve, like a background noise when audio runs thru headphones or facetime. Other than that ... didn't notice anything to run in a bad way. My GTX 1060 works great.

Cheers,

Coss

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Donation Goals

    Hosting February 2018

    Please donate to support the community.
    We appreciate all donations!



    $48.99 of $120.00 goal reached.
    Donate Now
  • Download Hackintosh

  • Files

  • Posts

    • Well thanks guys for help or say no help any way i fix everything by installing  High sierra everything works including hdmi audio also. So admin/moderator can you close/move this post?
    • hello all, i wonder if somebody did sucssesfuly installed ati drivers on one of polaris gpu on 10.9 10.10. or 10.11 mac? i find yesterday on some russian forum that they did some bios mods on polaris gpus on siera and high siera but i dont understand process. also no luck for kext emulator on phenom 2 cpu for siera and high siera i got rx560 sapphire 2gb and i tryed install mac but on gpu it said 8mb and graphic is awfull. everithing else works exept spdif output for audio and gpu. i cannot install siera or high siera because of unsupported cpu sse4.1 or sse4.2 my specs are asus m5a97 r2 evo phenom II 955 black edition x4 @3.2 g stock ram 3x4gb ddr3 @ 1333 underclocked because of cpu limitations rx560 sapphire 2gb 60gb adata sp900 2x500 gb wd blue (1x 2.5" , 1x 3.5") all your comments are welcome thanks
    • guys please help me .....................im stucked at apple logo while installing im using hp laptop core i5 7200u 6gb ram amd radeon R5 M430
    • I have working audio, graphics and network on this 10.13  Now store has sent me "security update" which I believe is 10.13.3.  Has anyone done this via store? What do I need to do before I install it? I have issues loading EFI so have to always manually mount it (Clover configurator and EFI mounter both fail) but using terminal and command "open /efi" I am able to mount and make changes to my config.plist too.   
    • Hi guys, I try to install Mac OS X Yosemite on my computer, but... i get stuck at the logo (when i boot it) + i see a bar, who won't charge. Can you give me a solution?   Processor: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (2 CPUs), ~2.0GHz Memory: 2048MB RAM    User DPI Setting: Using System DPI  System DPI Setting: 96 DPI (100 percent) Display Card name: NVIDIA GeForce 210  Manufacturer: NVIDIA Chip type: GeForce 210 DAC type: Integrated RAMDAC  
  • Download Statistics

    • Files
      848
    • Comments
      2,137
    • Reviews
      2,570

    Latest File
    By Vale1831

    14    0

×