Attempt 4 (legacy bios):
+boot from usb
+select the previous installation ( attempt 3)
+High Sierra works!
So High Sierra did install (altough it showed installation couldn't finish) but It din't install the boot loader correctly. I can access osx using the usb.
+Usbs 2.0 & 3.0sound work well.
+Geekbench shows normal score.
-Intel hd graphics, shows like having 7mb of ram, diplays poor resolution.
-Boot without usb
How can I translate Enoch's configuration to Clover?
@Niresh Thank you for making hackintosh installation easy and simple. I almost gave up with the other procedures. Glad I stumbled here. First try and it worked right away. You are the greatest.
I installed also your high sierra zone and same, first attemp installing and it works right away. Just my nvidia gt730 ddr3 is not working due to lack of driver support.
Your i5 6th generation can run Sierra & High Sierra
Im not sure about the AMD CPUs but High Sierra is pretty good capable of running them (Im not an AMD Expert), but all your CPUs must support SSE4.1 instruction set to run Sierra or High Sierra, otherwise you will end up with a kernel panic.
If you have dual graphics cards or chipset in same machine, try Sierra instead of High Sierra.
High Sierra for Intel & High Sierra for AMD are separate releases.
but you can try the AMD version with Intel machines.
Properly setup BIOS before booting your Hackintosh
You have to boot from these and post picture of your problem, without a problem i can't debug