ZenShredder - Hackintosh Zone Jump to content

ZenShredder

Members
  • Content count

    5
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

0 Neutral

About ZenShredder

  • Rank
    Newbie

Profile Information

  • Gender
    Male
  1. This topic can be closed, the solution was to re download the DMG and reinstall it after wiping the USB and combining all the partitions again.
  2. Hello, so I'm able to get Yosemite up and running on my desktop, however I cannot get the graphics kexts to install or work. I've followed the simple instructions of backing up the originals, installing and then rebuilding the system cache and permissions through the Kext Wizard, but to no avail. Anyone have an idea of what I'm doing wrong? Are they just bad kexts? Are my bootflags incorrect? Here's the specs and bootflags I used for my system: System: AMD FX 8350 8-Core @ 4.0Ghz MSI Radeon R9 290 4GB ASUS M5A97 R2.0 AMD Radeon R9 Gaming RAM 4X4GB @ 2133Mhz Corsair HX850 PSU Samsung 840 EVO 250GB(Windows OS), WD Black 3TB performance drive(storage), WD Caviar Blue 320GB laptop drive(Mac OSX disk) Boot Flags: First USB Boot & Install: /amd1 npci=0x2000 GraphicsEnabler=No (these were recommended in a guide, but my system will boot and install with just /amd1 or /amd) Post Install: Hard disk boots w/o any flags Chameleon Wizard Bootflags: GraphicsEnabler=Yes npci=0x2000(I get slightly better graphics performance with these, but my card doesn't register in the SMBIOS and I still get graphics freaking out when I log in and load programs like Safari, also I cannot change the resolution through the system settings, and if I change to 1920X1080X32 in Chameleon it makes Yosemite freeze on log in) Any and all help is appreciated, thank you!
  3. Hello, so I've previously been able to get Niresh Yosemite and Mavericks to load on my laptop(which weirdly enough has far less support than my desktop components), now I'm attempting to install it on my desktop. However, I keep running into an error that keeps repeatedly popping up until the install comes to a grinding halt. This is the same install error that keeps popping up with minor variances depending on the file being pulled up: localhost OSInstaller[389]: PackageKit: Got copier error 5 extracting to path /Volumes/Big Mac Attack/.OSInstallSandbox-tmp/Root//System/Library/PrivateFrameworks/SystemMigration.framework/Versions/A/Resources/ar.lproj/Localizable.strings: Input/output error This never changes regardless of what boot flags or customizations I select in the installer. So far I've tried just /amd -v, /amd1 -v, /amd -v -x, /amd -v -x -f npci=0x2000 dart=0, and a few more I can't remember. As for customizations, I pretty much leave everything as it is with the exception of choosing the Mac Pro 3.1 SMBIOS, unchecking the graphics enabler and checking the backup kexts, removing the laptop keyboard/trackpad functionality and that's it. With my laptop I had a whole lot of trouble getting to the installer, but once it installed it worked(somewhat). Now the problem is vice versa, it's super easy to get to the installer, but the installer stops extracting and writing files a little bit after the 9 minutes left marker. I've tried the "1 minute left" solution where you stop the install, restart and install without reformatting, that just gave me a failure to install error. Any help would be appreciated, here are my specs: ASUS M5A97 R2.0 Motherboard AMD FX 8350 4.0 Ghz MSI Radeon R9 290 4GB AMD Radeon R9 Gaming RAM 4X4GB @ 2133Mhz Samsung 840 EVO 250GB SSD(Windows OS Drive), WD Black 3TB Performance Drive(Storage), WD Caviar Blue 2.5" 320GB drive(Mac OSX destination), LG Blu-Ray drive Corsair HX850 PSU A couple of notes I'd like to make, the first being that my drive I'm installing OSX on is on a SATA to USB adapter connected to a USB 2.0 port, I have USB 3.0 ports on my motherboard but neither the OSX drive or the USB drive with Niresh OSX on it are visible when plugged in there, I have a PCI card reader with 2 USB 3.0 ports on it as well but when I boot from the USB drive I get stuck at the "Still waiting for root device" infinite loop. Secondly, all of my drives are still plugged in via SATA for my desktop with the exception of my install drives, not sure if this is an issue with desktops since I've only done this on my laptop and had to do it through USB without ripping my laptop open(which takes FOREVER because Asus planned the design horribly) so if it is, let me know so I can try that(I don't want to move anything inside my PC right now unless I have to). Thanks in advance for any and all help!
  4. Hello, so I'm new to the Hackintosh world but I've got my feet wet by attempting to install OSX Mavericks on my laptop. After a lot, and I mean A LOT of hours, trial and error, I've finally got it to boot and run the OS, which has been quite an accomplishment! However, there's still several lingering issues that are pretty vital to fix. I've done a lot of research on how to do so, but everything I've tried seems to be half-right or completely wrong and not work at all. Before I get started, let me list my system specifications, methods and steps I used to get to where I am now. My Laptop: Asus R510DP-RH11(based on the X550DP system) APU: AMD A10 5750M @ 2.5Ghz 4 Cores/4 Logical GPU: AMD Radeon HD 8650G+8670M 2GB RAM: 2X4GB 1600Mhz Drives: WD Black 2 Dual Drive(120GB SSD + 1TB HDD), WD Caviar Blue 5400RPM 2.5" Drive, CD/DVD R+W Optical Drive Display: 1920X1080 LED @ 60Hz 1. Please note, OSX is NOT going on my Black 2 drive, Windows is currently installed on there and I don't want to mess with that. OSX is currently installed on my WD Caviar Blue drive, which is an internal drive from a previous laptop turned into a spare external drive to run OSX. 2. The boot flags I've used to boot into the installer successfully and install OSX are: amd -v cpus=1(this was extremely hard to get to believe it or not, I tried up to 7 or 8 boot flags simultaneously at some point just to get to where I am!) 3. I don't remember everything I customized when I selected how to install OSX, however I do remember turning off GraphicsEnabler, TRIM support for SSDs, selecting the Macbook Pro identifier and Chameleon Standard for my boot even though my motherboard boots in UEFI. 4. My BIOS are very limited, I can remove secure boot, fast boot and enable the other two features(I can't remember their names) to load the Niresh USB, but outside of that there's no option to disable APU graphics, no other "advanced" options except how the motherboard reads from SATA, etc. -------------------------------------Troubleshoot Section------------------------------------- Okay, so now that's out of the way, let me explain my current issues. First off, OSX will not boot without the Niresh USB, I can select the drive and use the boot flags "-v" and "cpus=1" but without them or the drive, I cannot boot OSX at all. How can I make my drive independent and able to boot on its own? If I cannot, can I partition my WD Blue drive to have the Niresh USB and the OSX system so it only takes 1 USB port? If both are not an option, what options do I have then? My second issue is with wireless and bluetooth capabilities, my wireless drivers are from Ralink, however I have no clue what my actual wireless card model is. It does not say what it is on the Asus website, in the device manager or in the manual. I attempted to load some Kexts that were supposed to work, but they did not. Is there an extra step I need to take in Terminal or Kext Wizard? My third issue is my trackpad, the drivers for it aren't working at all. I honestly haven't attempted to fix this issue as it's been the least of my concerns considering that a wireless mouse can remedy this issue. However, I rely on a bluetooth mouse and not a wireless mouse to keep a USB port free, hence the conundrum of a catch 22(sort of). My last concern, not the least however, is my graphics problem. The resolution is stuck below 1080p, I'm assuming at x768 or something close to 720, but not 1080. There are also several graphical glitches when loading Launchpad and Safari, I haven't opened everything yet so there could be other programs that are affected, but mainly the graphics flicker and disappear for 1/10th of a second when moving around within the application. As I said before I cannot disable the APU graphics within my BIOS, I'm perfectly okay with disabling the dedicated GPU because I don't plan to run graphic intense applications like Photoshop or ZBrush in OSX, mainly XCode for learning purposes and Garageband/Logic Pro for Audio design. As long as I can get one of the graphics cards to stop glitching out and functioning properly for my Hackintosh, I'll be happy. Thanks in advance for your help and support, I do truly appreciate it. I will try to answer your questions as best and as quickly as I can, however I'm not an expert(at least with Mac) so bear with me please! Thank you.
×