mdg1618 - Hackintosh Zone Jump to content

mdg1618

Members
  • Content count

    5
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

1 Neutral

About mdg1618

  • Rank
    Newbie
  1. Hello Ashishdadhich, Sorry to hear that? Did you get your system up and running yet? I got mines up and running, but I had to download and install Niresh Yosemite on my system at first. After that I downloaded Sierra OS X from Hackintosh Zone and then made a bootable Sierra USB using Disk Utility. After that my system would only boot with the USB plugged in, so I had to copy my EFI folder from my USB and replaced it with the one on my disk drive (mounted both drives on the desktop using clover configurator) and now all works well. I hope that this helped you, if not please feel free to comment. I will do my best to be of service although I am also new at this.
  2. Hello Niresh, Thank you for your reply. I did not change the SMBIOS, it is still set for iMac 14,2.
  3. Sierra - no bless setting for a primary boot program was found Hello: I had Yosemite 10.10.5 installed on my PC (PC specifications are noted below) via "Niresh's Yosemite with AMD & Intel ISO & USB" and everything ran well. Recently, I tried to upgrade to Sierra OS via "Hackintosh Sierra Zone", but ran into some problems. I rechecked my BIOS settings and everything was OK and I also checked (verified) my SSD, which was also OK. During the booting of my system, I use the flags: cpus=1 npci=0x3000 nv_disable=1 which allows me to get to the install screen, where I am able to access Disk Utility to erase my SSD. Afterwards, I use the "Customize" button within the macos installer to install needed drivers and kexts (I have tried to install Sierra OS without changing any of the settings as well). At last, I press the "Continue" button within the macos installer and after a couple of seconds, I get a message: "no bless setting for a primary boot program was found" I searched the forum and found a similar problem and deleted "OsxAptioFix2Drv-64.efi" from: HZ/EFI/CLOVER/drivers64UEFI using Windows 10, because I did not know how to do it in the terminal. Even after the deletion of "OsxAptioFix2Drv-64.efi" I still receive the message "no bless setting for a primary boot program was found". I also tried to install Sierra OS onto my system by utilizing different USB ports on my PC. I have searched for common boot flags to alleviate this problem and I have searched the Web as well with no solution found until now. Thank you in advance for your assistance towards this matter. PC Specifications: MoBo: Asus Rampage IV Black Edition (BIOS:0602 x64) CPU: Intel i7-4930K GPU: PNY Geforce GTX 780 Ti 3072MB OC Memory: 4 x 4GB Corsair Dominator Platnium 16GB (4 x 4GB) DDR3 DRAM 2133MHz C8 PSU: Super Flower 1000W CPU Cooler: Cooler Master Nepton 280l System Drive: Samsung 840 Pro - 128 GB SSD Storage Drive: 2 x Seagate Barracuda 7200.14 ST3000DM001 3TB - 7200 RPM 64MB Cache
  4. no bless setting for a primary boot program was found Hello: I had Yosemite 10.10.5 installed on my PC (PC specifications are noted below) via "Niresh's Yosemite with AMD & Intel ISO & USB" and everything ran well. Recently, I tried to upgrade to Sierra OS via "Hackintosh Sierra Zone", but ran into some problems. I rechecked my BIOS settings and everything was OK and I also checked (verified) my SSD, which was also OK. During the booting of my system, I use the flags: cpus=1 npci=0x3000 nv_disable=1 which allows me to get to the install screen, where I am able to access Disk Utility to erase my SSD. Afterwards, I use the "Customize" button within the macos installer to install needed drivers and kexts (I have tried to install Sierra OS without changing any of the settings as well). At last, I press the "Continue" button within the macos installer and after a couple of seconds, I get a message: "no bless setting for a primary boot program was found" I searched the forum and found a similar problem and deleted "OsxAptioFix2Drv-64.efi" from: HZ/EFI/CLOVER/drivers64UEFI using Windows 10, because I did not know how to do it in the terminal. Even after the deletion of "OsxAptioFix2Drv-64.efi" I still receive the message "no bless setting for a primary boot program was found". I also tried to install Sierra OS onto my system by utilizing different USB ports on my PC. I have searched for common boot flags to alleviate this problem and I have searched the Web as well with no solution found until now. Thank you in advance for your assistance towards this matter. PC Specifications: MoBo: Asus Rampage IV Black Edition (BIOS:0602 x64) CPU: Intel i7-4930K GPU: PNY Geforce GTX 780 Ti 3072MB OC Memory: 4 x 4GB Corsair Dominator Platnium 16GB (4 x 4GB) DDR3 DRAM 2133MHz C8 PSU: Super Flower 1000W CPU Cooler: Cooler Master Nepton 280l System Drive: Samsung 840 Pro - 128 GB SSD Storage Drive: 2 x Seagate Barracuda 7200.14 ST3000DM001 3TB - 7200 RPM 64MB Cache
  5. Hello, I recently purchased a new computer build and wanted to run the Apple OS X Mavericks on it. I downloaded and used the Niresh USB installer for OS X Mavericks in my previous build with no problems, but my most recent build will not let me get past the Grey start up screen of the installer. There was no spinning wheel or other signs of activity shown on the monitor. I have a Asus Rampage IV Black Edition motherboard that shows "AE" (Legacy Boot event) in its Q-Code display. Other components of my computer build are as follows: MoBo: Asus Rampage IV Black Edition (BIOS:0602 x64) CPU: Intel i7-4930K GPU: PNY Geforce GTX 780 Ti 3072MB OC Memory: 4 x 4GB Corsair Dominator Platnium 16GB (4 x 4GB) DDR3 DRAM 2133MHz C8 PSU: Super Flower 1000W CPU Cooler: Cooler Master Nepton 280l System Drive: Samsung 840 Pro - 128 GB SSD Storage Drive: 2 x Seagate Barracuda 7200.14 ST3000DM001 3TB - 7200 RPM 64MB Cache Any and every piece of advice would be greatly appreciated concerning this matter. Thank you in advance for your time and concideration. Best wishes Mikel
×