• Content count

  • Joined

  • Last visited

Community Reputation

1 Neutral

About AndreiUle

  • Rank

Profile Information

  • Gender
  1. Although you are getting that error that is not the actual problem, the problem is the Intel HD graphics. Boot in single user mode: -s then use this: mount -uw / cd /System/Library/Extensions mkdir intel_back mv AppleIntelHD* AppleIntelF* intel_back/ touch ../Extensions
  2. No, that is not what I meant. In Windows 8.1 the CPU it's at his lowest when not used and automatically increases if need be just like Intel designed it with Intel® Turbo Boost Technology. In OS x Mavericks it just stays at 3.2GHz all the time hence increasing temperature and draining battery. I have tested with: for both Windows and Mavericks
  3. I'm have installed with NullCPUPowerManagement and I think that is the reason why my CPU is working at (3.2GHz) all the time. (In Windows 8.1 the frequency is low: 0.80GHz and increases if need be up until 3.2 GHz) Is there something I can do to fix this issue? My configuration: Laptop ASUS N750JV-T4042D Processor: Mobile QuadCore Intel Core i7-4700 HQ, 800MHz Motherboard Chipset: Mobile Intel Lynx Point HM86 Chipset Graphics (GPU): NVIDIA GeForce GT 750M, 4GB DDR3-1600 Network Devices: Gigabit Ethernet, 802.11 a/b/g/n 2x2 RAM: 8GB DDR 3, 1600 MHz Sound: SonicMaster, Bang & Olufsen ICEpower 2.1 HDD: 1TB, 5400 rpm Others:Bluetooth 4.0, card reader, webcam
  4. when I go to Settings > Energy Saver > Show battery I check it and then in the next second it unchecks itself. It's not working for me.
  5. I'm only a noob but I think this is not a matter of "if Niresh works" but "if OS X Mavericks works". You can check this:
  6. Hi, After I finally installed Mavericks on my laptop last week I've tried to get as much info as I could in my free time to fix the problems that I'm having: network, trackpad, audio not working. After trying all kind of settings and drivers from the download area I still did not get this damn laptop to work properly. Today I've found a new idea which is using a DSDT patch and almost tried that too. The problem is that the author says the system DSDT has to be error free so that I can apply the patch but I have over 100 errors. I have not found a solution to fix those and it is beyond my abilities.Can anybody help me? Check the link below to download a .txt file with errors (errors-dsdt.txt). Please ask if there is something else I need to provide so that you can get a better understanding or offer a fix. I'm also open to other solutions to get my laptop working. Thank you! Here is the .txt with errors My configuration: Laptop ASUS N750JV-T4042D Processor: Intel Core i7-4700HQ, Haswell/ID8C49, 2,4 GHz, 3,4 GHz Turbo Motherboard Chipset: Mobile Intel HM86 Chipset Graphics (GPU): NVIDIA GeForce GT 750M, 4GB DDR3-1600 Network Devices: Gigabit Ethernet, 802.11 a/b/g/n 2x2 RAM: 8GB DDR 3, 1600 MHz Sound: SonicMaster, Bang & Olufsen ICEpower 2.1 HDD: 1TB, 5400 rpm Others:Bluetooth 4.0, card reader, webcam
  7. I have installed again without the battery management and now it worked: -v -f -x GraphicsEnabler=Yes PCIRootUID=0 I have a lot of things not working (e.g display resolution, mousepad and internet, and so on) but I'm in. I will try to solve them one by one and I will open other topics if I run into trouble. Thank you for all your help
  8. Yes I did select "Enable Battery Percentage". Here are all that I selected in the Customize section when I installed: Settings: And this is the one related to Battery I will test with -x flag. Update: tested and no luck. Moving on. Do I remove that from the USB installer and then install again?
  9. Pretty much same results. I'm just not that lucky -v -f GraphicsEnabler=Yes PCIRootUID=1 -v -f GraphicsEnabler=No PCIRootUID=1 -v -f GraphicsEnabler=Yes PCIRootUID=0 and this one is different -v -f GraphicsEnabler=No PCIRootUID=0
  10. I executed those commands without errors and after I restarted it still does not seem to work. Combinations: -v -f GraphicsEnabler=Yes PCIRootUID=Yes -v -f GraphicsEnabler=No PCIRootUID=No -v -f GraphicsEnabler=No PCIRootUID=Yes -v -f GraphicsEnabler=Yes PCIRootUID=No -v -f -x All look the same exept this one: -v -f GraphicsEnabler=Yes PCIRootUID=Yes, which shows the screen below.
  11. I'm getting xpcm not found like in this screen and after I press any key it goes back to the boot screen. So what I used with the DVD is not working on the installed one.
  12. -v -f -v -x -f
  13. Ok, it worked. I have installed and I'm just one step away from promised land After the install I have restarted and got the boot screen with the Maveriks partition. I chose that but it got stuck at the Apple logo. When I installed I used the following settings. Considering my laptop configuration in the initial post can you look at the following screens and tell me what would you have done different in the settings before installing? and what should I do now being stuck at the Apple logo? thanks! Settings: Apple logo stuck: P.S. I apologize for the quality of the screens.
  14. I tried that too and got the same screen as in my previous post but then I noticed you typed XCPM and in the download section I remembered it was XPCM so I switched to that and typed the following command: xpcm-free -v -f -x and I didn't get that error anymore. A lot of data was appearing on the screen and after 3 - 4 pages or so I got the s4.jpg screen and then the s5 and s6. s4: and then: s5 and s6
  15. Thank you for your answer. I tried your suggestion and got another error. Printscreen attached. After I press a key it goes back to the boot screen.