• Content count

  • Joined

  • Last visited

  • Days Won


Everything posted by mac123456789

  1. Version 2.6.6


    - Make full service for macOS kexts easily. - Latest Kext Utility v2.6.6 for mac OS 10.5-10.12 macOS "Sierra" Super Speed Edition FULL version with KU_config.plist © cVad 2008-2016
  2. Version C3.0 3.2 (3.2.240)


    #Editor org.chameleon.boot.plist Add resolution, kernel, boot flag, and other #Editor smbios.plist Change definition your hackintosh device #Help installation kext and other
  3. Version 10.10.1


    Hi Here is the QE_CI Exotic patch for OS X Yosemite 10.10.1 and HD 48xx series cards It's made by nyolc8 (as always) based on Netkas work!!! a big thanks to both of them Just enjoy P.S: the previous exotic patch (10.10.0) should work fine on 10.10.1 QE_CI Exotic patch Yosemite 10.10.0
  4. Version


    FakePCIID.kext The purpose of this kext is to attach to any IOPCIDevice so it can provide alternate PCI ID when another driver attached to the same device requests them. This technique can be used instead of patching binaries that may check for supported device-ids (or other PCI IDs) in their IOService::probe or IOService::start method. In order to attach FakePCIID to a given IOPCIDevice, an injector kext must be built that IOKit can use to match against. The FakePCIID.kext Info.plist has no built-in IOKitPersonalities, as it is generic and not built to suit a specific purpose. The distribution ZIP provide has four such injector kexts, which are described below. Custom injector kexts can be created for other devices. Note: FakePCIID_HD4600_HD4400.kext works for HD4400 mobile, HD4600 mobile, HD4200 mobile, and HD4600 desktop. In any case, a DSDT patch, FakeID configuration (Clover), or FakeProperties dictionary in the injector's Info.plist will be required to inject the properties that FakePCIID can read on the IOPCIDevice. The properties used by FakePCIID are described later in this post. The properties must be present on the PCIDevice that is being hooked (the direct parent of FakePCIID). Build Environment My build environment is currently Xcode 6.1, using SDK 10.6, targeting OS X 10.6. 32-bit Builds This project does not support 32-bit builds, although it is probably not difficult to build one given the proper tools. What's New in Version 2015-03-29 All Credits go to: the-darkvoid and REHABMAN !
  5. Version


    Remove any existing "ApplePS2Controller, VoodooPS2Controller, AppleACPIPS2Nub, ApplePS2Keyboard and old Elan Touchpad" kexts if you have already installed from the HDD '/System/Library/Extensions ', '/Extra/Extensions', and '/System/Extensions/Library/myHack.kext/Contents/Plugins/' (if you used myHack USB installer for OSX).
  6. Version


    Asus k53sj i5-2410M work NVidia520m) MacBookPro 8.1
  7. Version


    YosemiteLogin For Chameleon base on YosemiteLogin For Clover EFI.
  8. Version ALC888S


    Hallo, i'm from Indonesia. This is my first uploaded kext. AppleHDA for ALC888s Just install it using kext installer and reboot.
  9. Version


    patched ALC892 269.25 10.10.2 with Toleda script i use layout-id 1
  10. Version


    This will enable your analog 6 channel surround sound using AppleHDA's native multi-channel DSP support. Furthermore, all jacks work! Under System Preferences, select Internal Speakers, and there the analog 6 channel surround sound should be. No need to create aggregate device in Audio MIDI Setup! Internal Speakers can be automatically switched to headphone after plugging headphone in. Internal microphone (rear mic) can be automatically switched to Line In (front mic) after plugging front mic in. "Use ambient noise reduction" is available when using Internal microphone (rear mic.) Add this Method DSM under HDEF:Device (HDEF) { Name (_ADR, 0x001B0000) // _ADR: Address ...skip... Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Store (Package (0x0E) { "AAPL,slot-name", Buffer (0x09) { "Built-in" }, "name", Buffer (0x06) { "audio" }, "model", Buffer (0x0F) { "Realtek ALC889" }, "device_type", Buffer (0x16) { "High Definition Audio" }, "layout-id", Buffer (0x04) { 0x20, 0x00, 0x00, 0x00 }, "hda-gfx", Buffer (0x0A) { "onboard-1" }, "PinConfigurations", Buffer (Zero) {} }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } }It is necessary for some motherboards (such as ASUS) to add IRQNoFlags under HPET, in order to load AppleHDA:Device (HPET) { ...skip... Name (BUF0, ResourceTemplate () { IRQNoFlags () {0} IRQNoFlags () {8} IRQNoFlags () {11} IRQNoFlags () {15} Memory32Fixed (ReadOnly, 0xFED00000, // Address Base 0x00000400, // Address Length ) ...skip...**CAUTION** After updating to OS X Yosemite, it is necessary to add the boot argument "kext-dev-mode=1" in order to make this patched AppleHDA work:kext-dev-mode=1 PS. I can't guarantee it will work for all ALC889. Please don't PM me for this, as I don't have time to help each guy. Sorry! Please do not upload this to other website especially Tonymac's forum! What's New in Version v269.25 (10.10.2) Fixed binary patch for OS X Yosemite
  11. Version


    Notice: This is used for none-Intel chipset USB3.0 controller. The AppleUSBXHCI.kext is based on Zenith432's patch. Install this to /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns. Or use Clover's KextsToPatch with the following Binary patch.
  12. Version


    My first clover bootloader set on ASUS UX31A for Mac OS 10.10.1with dsdt Based on clover from topic Bios version 2.19 Original wifi+bt module changed on Ateros AR5B195 Installed on EFI partition Working: - Intel HD4000 Graphics on LCD - WiFi as AR9285 + BlueToothAR3004 - FN Keys (sound,brightness,keyboard light) - USB works as 2.0 (as 3.0 not tested) - Sleep mode - Camera - Audio + Microphone - Touch Pad Not working - External VGA - Card Reader Not tested - External HDMI
  13. Version 10.10.0


    Hi Here is the QE_CI Exotic patch for OS X Yosemite 10.10.0 and HD 48xx series cards It's made by nyolc8 (as always) based on Netkas work!!! a big thanks to both of them Just enjoy
  14. Version


    For 230 types of IOKitPersonalities ! Full list is included in download Chipsets : RT2770;RT2870; RT3070; RT3071;RT3072; RT3370;RT3572 ;RT3573; RT5370;5372;RT5572;MT7610;MT7612;MT7650; MT7662; ;RT8070;RT9707 What's New in Version Now OSX 10.10 compatible
  15. Version Bios 2.15


    DSDT for motherboard Supermicro X7DCA-L
  16. Version


    DELL 5737 HACKINTOSH Specs CPU: Core i7-4500U RAM: 16GB DDR3L HDD: 1TB VGA1: Intel HD 4400 VGA2: AMD Radeon HD 8870M DISCLAIMER: Altering your DSDT is serious business and can cause physical & unrepairable damage to your machine! I am not responsible for any damage happens to your computer. I have been using this DSDT from OSX 10.9 to OSX 10.9.5 updates were made directly from the App Store. WORKS: Everything except WIFI (here is a link for the wifi replacement). DSDT patches 1- Intel HD 4400 injection a simple _DSM injection, thanks to Rehabman for suggesting the proper igplatformid (0A260000). 2- sleep fix thanks to Rehabman the laptop-dsdt-patches in his github, thanks to nguyenmac for the required steps to patch for sleep. but it was not stable, and made a lot of CMOS RESET, and it took me (hossny88) a lot of effort to finally make sleep working with zero CMOS Reset (very stable). 3- lid fix lid will sleep and wake the system, all the credits to hossny88 cheating a little bit from MacbookAir6,2 DSDT. 4- brightness fix (ACPIBacklight.kext) all credits to Rehabman, using PNLF Haswell fix 5- battery fix (ACPIBatteryManager.kext) all credits to Rehabman (it has a little problem in which few times battery remaining time becomes stuck at 20:00 hours, but at the same time i boot into Windows 8.1 and the remaining time stuck at 148 hrs., my conclusion it is a Dell bios bug) 6- Airplane mode button switch disabled all credits to hossny88. this will force wifi and bluetooth to work even if you booted OSX with Airplane mode ON and it will disable the functionality of (Fn+F2) hossny88 (,, (Me) nguyenmac ( clover installation guide for Dell xx37 uploading kexts and clover configuration file Rehabman (, Laptop DSDT patch Suggesting Proper intel Framebuffer ID helping getting CPU power management to work Ramalama2 ( for uploading the DSDT of MacbookAir6,2 to his GitHub
  17. Version


    IOBluetoothFamily.kext for BCM20702A0 its work on my mono P8 Z77-V PREMIUM
  18. Version Bata 3 14A361P


    10.10 BETA 3
  19. Version 10.10 14A329R


    Usb Xhci New Version 1.2.7 For 14A329R
  20. Version 4.4.1


    Kernel flags module was rewritten. Now it won't remove unknown flags, and supports auto-update for new ones. Also support for PrivateData was added. thank you
  21. Version 2.90

    286 downloads <------------ DATA of the BIOS ROM ROM ASRock Z77 Extreme 4 Patched thank you
  22. Version 1.00


    This script allows you to export the PinConfigOverride of your sound card from the Windows registry and converts the HDA Verbs. Limitations: - The PingConfigOverride.vbs script can not read files in UCS-2 format (default export format from reg and regedit tools). You must convert the file format before use with the script. Copy and paste the content to another file with notepad. Next Version: - Solve UCS-2 Limitation - Fixing HDA Verbs - Decoding HDA Verbs