vdonus - Hackintosh Zone Jump to content

vdonus

Members
  • Content count

    20
  • Donations

    $0.00 
  • Joined

  • Last visited

Community Reputation

7 Neutral

About vdonus

  • Rank
    Member
  1. Forget about the USB drive for this model... use a DVD... I used the Niresh’s Mac OS X 10.9 Mavericks (ISO)
  2. Solved: 1. Remove open MAC > System > Library > Extensions and delete the kext AppleSmartBatteryManager.kext 2. Install the kext AppleACPIPlatform.kext and VoodooBatery.kext from https://dl.dropboxusercontent.com/u/48696133/Hackintosh%20Dell%20Inspiron%2014R-3560.zip
  3. Hey guys. This topic shows how I installed the Niresh’s Mac OS X 10.9 Mavericks dual boot with Windows 7 on a Dell Inspiron 14R-3560, some steps may be redundant but that’s the way I did it work, if you have any problem just post bellow that I will try to help you. Scope: • Dell Inspiron 14R-3560; • Chipset HM77; • Intel Core i7 3632QM (2.2 GHz); • Intel HD 4000; (System Information attached). • Dual Boot: • Niresh’s Mac OS X 10.9 Mavericks; • Windows 7. • Enable Ethernet; • Enable Sound; • Enable Keyboard and Touchpad; • Enable HDMI on Intel HD 4000 Graphics; • Change Brightness; • Fix sleep mode; • View battery percentage. Out of scope: • Other notebooks model; • Enable GT 630M; • Enable Wifi. Preparation: • Download ImgBurn; • Download Niresh’s Mac OS X 10.9 Mavericks (ISO); https://www.hackintosh.zone/files/ • Burn the Niresh’s Mac OS X 10.9 Mavericks ISO into a blank Dual Layer DVD-R with ImgBurn; - AVOID USB DRIVE, I tried with 4 different USB Drive on 4 different ports with 4 different distro’s, with and without clover extra USB Drive. • Burn the Windows 7 Ultimate into a blank DVD-R with ImgBurn; • Download and save on a USB Drive the Slytherin ::The Extreme Post-Installation Utility 1.2; • Download (Dropbox) and save on the same USB Drive this Hackintosh Bios: • Access your BIOS and, • Disable “Virtualization Technologyâ€, • Set SATA Operation as “AHCI†and, • Change UEFI/BIOS Boot Mode to “Legacyâ€; Setup: • Press F12 and boot and choose CD-ROM to boot in Windows 7 disk; • In the first screen press SHIFT + F10 and: • type DISKPART <enter> • LIST DISK <enter> • SELECT DISK N (where N is your disk) <enter> • CLEAN (keep in mind that you’re going to lose all your data) <enter> • CONVERT GPT <enter> • EXIT <enter> ; • Close the CMD and shut down the computer; • Press F12 and boot with Niresh’s Mac OS X 10.9 with no boot flags; • Go to disk utility, create and format 3 GUID Partition Table, 1st as “MAC†– Journaled Extended, 2nd as “WINDOWS†– FAT MS-DOS and 3rd as “FILES†– FAT MS-DOS; • Quit disk utility and reboot the machine again; • Press F12 and boot with Windows 7 disk; • Install Windows 7 on the 2nd partition (will be shown as the 3rd - format as NTFS); • After the installation was completed, unplug all USB Drives and VGA/HDMI cables, reboot the computer, press F12 and boot with Niresh’s Mac OS X 10.9 with no flags; • Go to CUSTOMIZE and uncheck Ethernet and Sound, then extend Graphics > Backup Graphics Kext and select to move ATI and NVIDIA Graphics Extensions; • Select the MAC partition and install it; Post Install: • After reboot, press any key, than press SPACE on MAC and type -x -f -v IntelCapriFB=3; • Create your login on the OS X, wait Niresh’s Mac OS X 10.9, finishes the installation then restart; • Boot again on Niresh’s Mac OS X 10.9 with IntelCapriFB=3 only; • Plug the USB Drive and Install the Chameleon 2.2 svn rev. 2269 • Move the EXTRA folder attached replacing yours; - This Extra was made by Netmagico from InsanelyMac, if you know Portuguese I recommend you also to read this: http://www.insanelymac.com/forum/topic/296502-tutorial-de-instala%C3%A7%C3%A3o-do-mac-os-x-mavericks-x-windows-no-dell-inspiron-5420/; • Remove open MAC > System > Library > Extensions and delete the kext AppleSmartBatteryManager.kext; • Open the Slytherin ::The Extreme Post-Installation Utility 1.2 and • select Drivers > Sound > All in One Audio Solution; • select Drivers > TouchPad & Keyboard > Generic Touchpad; • select Tools > Brightness Slider; • select Fixes > Startup Brightness Fix; • select Fixes > Disable Hibernate; • select Fixes > Sleep Image Fix > SleepImageFix; • install then all. • Install the following kext attached to this post with Kext Wizard: • ALXEthernet.kext • IntelCPUMonitor.kext • AppleACPIPlatform.kext • VoodooBatery.kext • Repair the permissions on Kext Wizard and reboot without flags; • Open Brightness Slider and set to launch at the login; • Go to System Preferences > Sound > Output and select Speaker (Analog) • Donate and enjoy it! https://www.hackintosh.zone/index.php?app=donate … without @, @Deepak and crew work… We should be light years away from doing this so easily, I’m sure that these guys are changing Mac OS X history, and now we are part of it. Cheers and beers! Vinão
  4. @Devonic ... It says "NO BATTERY AVAILABLE" ... it doesnt show the battery %... do you know how can I correctly it?
  5. Hey guys... For me just rest left to finish the hackintosh this issue with my battery... follow bellow my specs: Dell Inspiron 14R-3560 - Dell - Inspiron 14R-3560 - MB: Dell. Chipset Intel HM77 - Processor: Intel Core i7 3632QM (2.2 GHz) - HD: 1TB 5400RPM SATA Hard Drive - 8GB DDR3 1600MHz - Screen 14†- Keyboard – Portuguese (ABNT2) - Integrated Mic - Webcam (1.0MP, HD 720P) - USB: 4 x USB 3.0 and 1 with Powershare - Bluetooth: Bluetooth 4.0 - 10/100 Ethernet - Sound Integrated - Nvidia GeForce GT 630M DDR3 1GB and Intel HD 4000 - Blu-Ray Disc Combo - Processor: Intel Core I7-3632QM 3ª Generation - Card 8-In-1 (SD, SDHC, SD-Uhs 50, MMC, MMC MS, MS-Pro, MS-Xc) - Screen Resolução: 1366X768 And follow attached the box from Niresh's OS X 10.0 Mavericks... on Slytherin 1.2 I installed the kext VoodooBattery but I got no progress with this... Any tips?
  6. Hey guys... I'm working with Niresh's MAC OS X 10.9 and I installed the Audio with Slytherin ::The Extreme Post-Installation Utility 1.2 --> Drivers > Sound > All in One Audio Solution, with the headphones it sounds perfect, but It doesn't work without it (with the speakers) Dell Inspiron 14R-3560 (Chipset HM77, Intel Core i7 3632QM (2.2 GHz), GT 630M & Intel HD 4000) Audio Specs: Ven ID 8086 Vendor Inter Corporation Dev ID 1e20 Device 7 Series/C210 Series Chipset Famility High Definition Audio Controller Class Multimedia controller Subclass Audio Device Any ideias? Tks a million Vinicius
  7. fuckinnnng yeah mannn!!!!!! IT WORKED...!!! IntelCapriFB=3... YOU ARE THE MAN!!!
  8. I tried this tutorial.. EXACTLY the same steps... I just installed the Mavericks with a DVD.. and the KEXT doesnt load... and when loads... takes the same screen... take a look... google drive: https://drive.google.com/file/d/0B9z3MfBQr-xMdFBfcDA3dG5OR1ktMFhORG1mOVFGNUdLc3BJ/edit?usp=sharing
  9. Hey guys. This topic shows how I installed the Niresh’s Mac OS X 10.8.5 dual boot with Windows 7 on a Dell Inspiron 14R-3560, some steps may be redundant but that’s the way I did it work, if you have any problem just post bellow that I will try to help you. Scope: - Dell Inspiron 14R-3560 (Chipset HM77, Intel Core i7 3632QM (2.2 GHz), GT 630M & Intel HD 4000) – System Information attached; - Dual Boot - Niresh’s Mac OS X 10.8.5 - Windows 7 - Enable Ethernet - Enable Sound - Enable Keyboard and Touchpad Out of scope: - Other models; - Enable GT 630M; - Enable HDMI – Intel HD 4000; - Enable Wifi. 1. Download ImgBurn; 2. Download Niresh’s Mac OS X 10.8.5.iso; 3. Burn the Niresh’s Mac OS X 10.8.5.iso into a blank DVD-R with ImgBurn (AVOID USB DRIVE, I tried with 4 different pen drive on 4 different ports with 4 different distro’s); 4. Burn the Windows 7 Ultimate into a blank DVD-R with ImgBurn; 5. Download and save on a USB Drive the Slytherin ::The Extreme Post-Installation Utility 1.2; 6. Access your BIOS, disable “Virtualization Technologyâ€, set SATA Operation as “AHCI†and change UEFI/BIOS Boot Mode to “Legacyâ€; 7. Press F12 and boot and choose CD-ROM to boot in Windows 7 disk; 8. In the first screen press SHIFT + F10 and type DISKPART <enter> LIST DISK <enter> SELECT DISK N (where N is your disk) <enter> CLEAN (keep in mind that you’re going to lose all your data) <enter> CONVERT GPT <enter> EXIT <enter> ; 9. Close the CMD and shut down the computer; 10. Press F12 and boot with Niresh’s Mac OS X 10.8.5 with no boot flags; 11. Go to disk utility, create and format 3 GUID Partition Table, 1st as “MAC†– Journaled (Extended), 2nd as “WINDOWS†– FAT MS-DOS and 3rd as “FILES†– FAT MS-DOS; 12. Quit disk utility and reboot the machine again; 13. Press F12 and boot with Windows 7 disk; 14. Install Windows 7 on the 2nd partition (will be shown as the 3rd - format as NTFS); 15. After the installation was completed, reboot the computer, press F12 and boot with Niresh’s Mac OS X 10.8.5 with no boot flags; 16. Go to CUSTOMIZE and uncheck Graphics, Ethernet and Sound, then extend Graphics and select only “Backup Graphics Kextâ€; 17. Select the MAC partition and install it; 18. After reboot, press any key, press SPACE and type -x (boot as safe mode); 19. Create your login on the OS X, wait Niresh’s Mac OS X 10.8.5 finishes the installation then restart; 20. Boot again on Niresh’s Mac OS X 10.8.5 without any flag; 21. Open the Slytherin ::The Extreme Post-Installation Utility 1.2 and select ONLY Drivers > Sound > All in One Audio Solution, install, reboot and then select Network > Ethernet > Atheros > ALXEthernet, install, reboot and finally select TouchPad & Keyboard > Generic Touchpad, install, reboot and done! Note: As I couldn’t enable the HDMI on the Intel HD 4000 Graphics I will try to solve this with the Niresh’s Mac OS X 10.9, so as soon as possible I’m going to post step by step how I did it on Mavericks. Cheers and beers! Vinão This post has been promoted to an article
  10. you mean... install the mavericks? I tried to do that with 4 diferent usb drivers on 4 diferent ports with 4 diferent distro's, I always recevie the message "operational system not found"... I don't know why but just work to me the Niresh's OS X 10.8.5 on a DVD (w/ ImgBurn)... Anyways... I'd applied the config.plist.zip on clover and the only diference is that now it changed to a diferent mac, iMac Aluminium I guess... I'm still thinking that is something related to the kext, because I can only boot if I remove ALL graphics kext on the installation or after with grafix, if I try with the HD 4000 *.kext I got that distorced screen that I'd shown on the post above... I shouldn't boot w/ GraphicsEnabler=No, IGPEnabler=Yes? It disable HDMI? or... Do you think is something related to ig-platform-id? http://clover-wiki.zetam.org/Configuration/Graphics#ig-platform-id
  11. now I'm using clover... I could install the hd 4000 hdmi enabler from slytherin... I finaly I can see the HD 4000 on the system information... but the HDMI still not working... check the pics bellow... did I forget something? check the image from sys info that says "no kext load" this is normal? 4 pics on google drive: https://drive.google.com/folderview?id=0B9z3MfBQr-xMZVowRDNGNFFrNUE&usp=sharing
  12. btw... my follow bellow my org.chameleon.Boot <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Credits</key> <string>www.hackintosh.zone</string> <key>EthernetBuiltIn</key> <string>y</string> <key>Graphics Mode</key> <string>1366x768x32</string> <key>GraphicsEnabler</key> <string>y</string> <key>Kernel Flags</key> <string>npci=0x2000 dart=0</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>y</string> </dict> </plist>
  13. checkout the results in dropbox https://dl.dropboxusercontent.com/u/48696133/20140316_230635.jpg left screen dell (black) right screen hdmi (distorted) - i can boot, i can see the mouse moving, but I cant see correctly... any tips?
×