Search the Community
Showing results for tags 'ivy bridge'.
Found 3 results
Hackintosh can't boot: all kexts assertion failed Worked late on my Yosemite Zone Hackintosh build I've been using for a year now. I peacefully shut it down, and went to sleep. The next morning as I woke up, my Hackintosh didn't want to boot up so I booted in verbose mode (my bootloader is Chimera) to see what's going on. The system did a fsck at the beginning, returning "The volume appears to be OK", after which every single Apple kext prints out an "assertion failed" message which leaves my system hanging. My specs are as follows: ASUS H61M-K ( https://www.asus.com/Motherboards/H61MK/specifications/ ) Intel Celeron G1620 ( https://ark.intel.com/products/71073/Intel-Celeron-Processor-G1620-2M-Cache-2_70-GHz ) AMD Radeon HD6570 ( http://www.amd.com/en-gb/products/graphics/desktop/6000/6570 ) 12GB of DDR3 RAM at 1333MHz 500GB HDD as only internal storage device, partition table (GPT) as follows: EFI Partition (200MB), OSX Partition (100GB), Recovery HD (650MB), Windows 10 Partition (80GB), MSR, Data Partition (250GB FAT32), Ubuntu 16.04 Partition (50 GB) Happens consistently on every reboot, so I can easily reproduce it. Things I've tried: -f flag kext-dev-mode=1 flag toggling GraphicsEnabler combinations of the three above trying to boot from GRUB (though probably fails because my OSX is installed in BIOS mode even though it's a GPT disk, while Windows and Ubuntu are running on UEFI mode) Deleting VoodooHDA.kext, as I've had minor troubles with it a while back None of these helped at all. I do have access to single-user mode though. I've also noticed a strange line of output during verbose, something along the lines of BSD root: major 0, minor 7. Assuming this means disk0s7, does this mean my OSX is trying to boot off the wrong partition (the Ubuntu one) instead, explaining why it fails on all kexts (because they aren't there)? My OSX partition is located at disk0s2. I feel like this has something to do with the issue. I'm just about ready to reinstall OSX entirely, I've already backed up all of my data and ready to wipe the partition if needed, though it would be nice to see if the problem is fixable on its own. Anyone got ideas?
Theos Theopsis posted a topic in Hackintosh MavericksHello everyone, I intent to buy a Acer Aspire AO756 with a Celeron 1007U Ivy Bridge CPU and install this distro. For the last three days and nights, I am searching info about the Intel HD Graphics, to find out if it is or it is not fully compatible with OS X, but with no results. Some says that it runs a Intel HD 2500, which from what I read on other forums is compatible (at least with ML), some says that it runs a Intel HD (simple, just like that) and it is not going to work with QE/CI. On the specs of this CPU, they said the graphic card is a HD 2500 or is based on it, something like this... anyways, from what I've understand, it is not a HD 2000. So is QE CI working or not for this specific graphic card, cause if it's not, I'm going to look for another Netbook? Thank you! LE: I've just realized that I have posted this topic in the wrong section. I did saw - Read this before you post - only after I have posted, so my mistake. Pease move this topiic in the right section, if there is one or delete it. Thank you and my apologise!
Hey here are the details of my build. I have a Lenovo Z500 Laptop. The config are as follows: Intel i5-3230M 2.59GHz processor Intel HD4000+nVidia GT635M 6GB DDR3 1TB HDD Atheros 9285 Wifi + Bluetooth I had a lot of problems with the Mavericks App Store + Unibeast installation method. Also with the Niresh Mountain Lion version. Due to the crappy EFI Loader of my laptop. After a lot of work and experimentation I finally managed to get the setup working flawlessly. What doesn't work: Wifi - The notorious Atheros 9285! I tried almost 10+ different kexts but nothing works! - Using Asus N10 USB adapter now Trackpad - it worked in the setup but stopped once it rebooted and booted from the drive (dunno y) but i really dont mind coz i always use USB mouse. nvidia graphics card - its a known problem with gt635m. But Intel HD4000 works pretty fine, being the native grpahics processor. Heres what I did: Bios Settings: Intel Virtual Technology: Enabled Graphic Device: UMA Graphic 1. Installed Niresh Mavericks from my USB wind Win32DiskUtility 2. While installation, Using the customize option, Just selected 'Enable Battery Percentage' leaving the rest settings to its default. 3. After installation, when I rebooted, I was getting the boot0 error. I installed chameleon bootloader and solved the issue. 4. As for the graphics, I was getting 64MB only. So I installed the kext (AppleIntelFramebufferCapri.kext and AppleIntelSNBGraphicsFB.kext) using the KextUtility. And without restarting, in the Chameleon Wizard, enebled the following options with values: a. GraphicsEnabler b. Intel Capri FB = 3 c. Inject Intel ig = 3 5. Voila! After restart I had 1024MB of graphics! 6. I changed the SMBios to MacBookPro 9,2 as its the closest to my system! Edit: I forgot to mention I needed to enable USBLegacy=Yes to use USB 2.0 Ports My GeekBench Score (64-Bit): Single Core: 2420 Multi-Core: 5123 Cheers!